To enable virtualization technology on South China motherboard, you need to operate it in the BIOS settings. First, enter the BIOS interface, find the CPU Configuration or Virtualization Technology option under the Advanced menu, and set it to Enabled. Then save the settings and restart the computer.
In the operating system, you need to install software that supports virtualization to use virtualization technology. For example, for Windows systems, virtualization software such as Hyper-V or VirtualBox needs to be installed. With this setup, we can use virtualization technology to run multiple operating systems or applications on the South China motherboard.
Method 1: (Legacy traditional mode Bios setting hard disk startup method)
1. According to your computer model, find the key to enter Bios. Some computers may be Esc, or it may be F2 or F8. , or the Delete key is possible. After entering Bios, switch to the Boot tab and check whether the first startup item is the hard disk;
2. If the first startup item of the hard disk is not the hard disk, then press Enter to select Boot Option #1, and then open Select the hard drive among the options, and after pressing Enter, you will find that there is no hard drive;
3. Press the up and down keys to switch to Hard Drive BBS Priorities, and press Enter to see if there is a hard drive;
4. There is also a Boot Option #1 inside. You can see that the status at this time is Disabled, indicating that it is closed. Then press Enter directly to reselect the hard disk;
5. Return to the interface under the Boot option. Enter again and select Boot Option #1. At this time, you will find that there is a hard disk, and then set the hard disk as the first startup item;
6. Finally, you can switch to Save & Exit (it may also be Save Changes and Reset or Exit Saving Changes (meaning to exit and save), for convenience, you can usually use the shortcut key F10 directly, and then select Yes in the pop-up window. However, for some motherboards, it is not necessarily F10. You can check your own motherboard Which is the shortcut to save and exit?
Method 2: (New ASUS machine as an example) (UEFI mode Bios settings hard drive startup method), many computers with pre-installed Windows systems on the market basically use UEFI GPT boot mode, compared with the traditional Bios, there are still some differences in settings;
1. It may be Esc, it may be F2, or it may be other keys to enter Bios. Everyone You can enter the Bios settings according to the keys of your computer, enter the Bios interface, and then press F7 to enter the advanced mode to make relevant settings;
2. Switch to the Boot option and change the Boot Option #1 option to Windwos Boot Manager is a UEFI boot partition, just save the settings at the end;
1. Press the DELETE key on the keyboard when booting to enter the BIOS.
2. Enter the main interface of BIOS.
3. The first item is Standard CMOS Features, which is the standard setting of CMOS. Here you can set the startup sequence, onboard equipment, operating frequency, etc. Can be set according to personal needs.
4. The second item is AdvancedBIOS Features (advanced BIOS settings), which sets the first startup item when booting. It is needed when installing the system.
5. Setting method: Expand hard disk boot priority (hard disk boot priority) and set it as the first startup item.
6. Save the changed settings (yes/no)
Huanan x99 motherboard bios settings, restart the computer and continuously press the [DEL] key to enter the BIOS settings
The method of setting the scheduled boot time of the South China motherboard may vary depending on different motherboard models, but generally speaking, you can follow the following steps: 1. Open the BIOS setup program of the South China motherboard. This usually requires pressing the "Delete" key on the motherboard to enter the BIOS setup page. 2. In the BIOS setup page, find options such as "System Setup" or "Performance Setup" and select advanced setup options such as "Advanced" or "Performance Configuration". 3. In the advanced settings page, find options such as "Power Management" or "APMS Setup" and select diagnostic options such as "Debug" or "System Diagnostics". 4. In the diagnostic options, select the option Reset or Save Setup to save your changes. 5. Exit the BIOS setup page and restart your South China motherboard. 6. Check whether your South China motherboard has been set to power on at a scheduled time. This usually requires pressing the "Delete" key when booting, entering the BIOS setup page, then selecting options such as "System Setup" or "Performance Setup", looking for options such as "Auto-Run" or "Startup", and selecting "Enabled" Or options such as "Disabled". Please note that these steps may vary between different South China motherboard models, so it is recommended that you consult your motherboard manual or online resources before proceeding to ensure correct operation.
1. Press ESC or DEL while booting to enter the BIOS.
2. In the Boot menu, set secure to disabled.
3. Set Boot List Option to UEFI.
4. Select USB as the first boot item in 1st Boot Priority.
5. Select Save changes and reset in the Exit menu to save and exit
1. Restart the computer and press the [DEL] key continuously to enter the BIOS settings, then move the keyboard arrow keys to the right, switch to the BOOT option, and then press Enter to enter csm parameters to turn on the compatibility mode,
2. After pressing Enter, change the default disabled of launch csm to enabled to enable compatibility mode.
3. Switch to the boot option and change fast boot to enabled to enable fast startup.
4 , and then switch to the Advanced option, enter the sata configuration option and change the hard disk mode to ahci,
5. Then change the SATA Mode mode to AHCI mode after entering, otherwise the hard disk may not be found when entering PE, it is recommended Change to ahci mode here,
6. Insert the U disk boot disk, restart and press F11, select the U disk boot item recognized (the default is uefi U disk boot and traditional mode, remember to uefi boot here) You need to make a U disk boot that supports uefi), press Enter
For South China motherboard, press the F12 key to enter the U disk boot
The hotkeys for selecting startup items are all F12. When booting into the first interface, press the "F12" key to display the startup item selection interface
2. Insert the startup disk into the computer, press the power button of the host to turn on the computer. When the host lights up, please press F8 frantically to enter the motherboard's "BIOS" quick startup interface, because ASUS's motherboard enters the "BIOS" quick startup program. The shortcut key is F8. Different brands of computers have different startup shortcut keys, so everyone knows the right one.
3. Then enter the startup item, select the USB disk startup item to enter the pe system, and then open the Xiaobai installation tool to reinstall the system.
The method of entering the BIOS for the Huananzhi motherboard is roughly the same as for other motherboards. The specific steps are as follows:
After turning on the computer, press the "Delete" key or the "F2" key on the keyboard. Different models of Huananzhi The motherboard may require different buttons, and you can determine the correct buttons by checking the on-screen prompts when booting or by checking the motherboard manual.
If you cannot enter the BIOS setting interface, you can try the following methods:
Restart the computer, press the "F12" key or the "ESC" key on the keyboard, enter the boot menu, and select "Enter BIOS Setup" option.
Restart the computer, press the "Ctrl Alt Delete" key combination on the keyboard, and press the "Delete" key or "F2" key multiple times until you enter the BIOS setup interface.
If your Huananzhi motherboard supports the fast boot function, you can press the "Shift" key or "F8" key on the keyboard when booting to enter the advanced boot options and select the "Enter UEFI Firmware Settings" option.
The above is the detailed content of What is the method to enable virtualization technology on South China motherboard?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
