The motherboard's RGB lighting effects are usually equipped with light strips. Like other RGB lights, you can directly connect them to the power cord. Just arrange the 2-pin heads one by one. One port can connect about 6-8. RGB (including RGB fans, graphics card RGB brackets, digital RGB light effects, etc.), general power supplies will have 3-4 large 4-pin power supply lines.
The argb pins of the chassis are plugged into the following
1. The RGB lighting effect of the motherboard is usually equipped with a light strip. Like other RGB lights, it can be directly connected to the power cord. The 2-pin heads are arranged one by one. That’s it. One port can connect about 6-8 RGBs (including RGB fans, graphics card RGB brackets, digital RGB light effects, etc.). Generally, the power supply will have 3-4 large 4-pin power supply lines;
2. The RGB lighting effect interfaces can be connected together and connected to a large 4-pin power cord;
3. The four pins on the left side of the supplied 12VRGB cable and the USB cable are 12VRGB, and the three pins on the right side of the interface are USB. interface, and from the side, you can see that there is an opening where the heat pipe contacts the fins. It is obvious that these heat pipes are connected to the fins by reflow soldering.
If your motherboard does not have an RGB connector, you can still use an RGB fan, but you will need to use an RGB controller or an adapter cable to connect the RGB fan to the motherboard. Here are some different options:
1. RGB controller: You can buy an RGB controller, connect it to your motherboard, and control parameters such as the color and brightness of the RGB fan through the controller . RGB controllers usually have multiple RGB plugs that allow multiple RGB fans to be connected.
2. Adapter cable: You can buy an RGB adapter cable, connect the plug of the RGB fan to the adapter cable, and then connect the adapter cable to your motherboard. Adapter cables usually have multiple plugs that allow multiple RGB fans to be connected.
3. Motherboard RGB interface adapter: Some motherboards may have RGB interfaces, but not all motherboards have them. If your motherboard has an RGB connector, but the connector type is different from the plug type of the RGB fan, you can purchase an RGB connector adapter, connect the plug to the adapter, and then connect the adapter to the motherboard's RGB connector. .
Please note that the functionality and performance of RGB controllers and adapter cables may vary, so please consider your needs and budget when choosing.
1. The RGB lighting of x99 motherboard can be connected to the RGB interface on the motherboard. 2. x99 motherboards are usually equipped with RGB interfaces for connecting RGB light strips or other RGB devices. By connecting to the RGB interface on the motherboard, the lighting can be controlled and adjusted. 3. In addition, some x99 motherboards may provide additional RGB interfaces to connect more RGB devices. This allows for richer lighting effects and personalization.
The RGB interface controls all RGB light effects linked to the motherboard. In other words, the RGB lights connected to this interface can achieve coordinated synchronization or changing light effects. It is also a must for users with obsessive-compulsive disorder. It’s no problem for religious players, get your LED lights ready, let’s show off together!
There are two versions of the RGB interface on the motherboard. One has 4 pins, which is the most common RGB interface. This can be directly connected to the 5050 light strip, so some users call it 5050. interface. Because there are 4 pins and no external buckle, it is not protected against reverse connection.
Where should the CPU cooler 5vrgb cable be plugged in? It must be plugged into the motherboard. Because the CPU radiator will adjust the fan speed on the radiator according to the temperature of the CPU, it must be connected to the motherboard. In other words, the temperature of the CPU can adjust the voltage to the fan on the radiator, thereby causing the fan to rotate at high speed or at low speed. Instead of connecting it directly to the power supply, it will rotate at one speed when the power is turned on.
1 You need to purchase a motherboard that supports RGBSW and an RGBSW light strip. 2 RGBSW refers to an LED light strip that supports both RGB and white. You need to insert it into the RGB and white interfaces of the motherboard and then control it through software. 3 When using RGBSW At the same time as the light strip, various colors and lighting effects can also be adjusted through the motherboard software to improve the aesthetics and use experience of the computer. However, it should be noted that the RGBSW interface and software settings of different motherboards may be different, so you need to carefully read the instructions and official tutorials.
The ARGb controller is usually connected to the RGB interface of the motherboard. Because the ARGb controller needs to obtain the control signal from the motherboard to work properly, and the RGB interface of the motherboard is the interface that provides the control signal. In addition, the ARGb controller also needs power supply, which can be powered through the SATA or Molex interface of the motherboard. If you have other questions, you can check the motherboard's manual. When using the ARGb controller, you need to pay attention to whether the RGB interface type of the motherboard matches the controller, such as 5V, 12V or Digital RGB. Also consider whether you need to purchase additional branch cords or adapters to connect multiple devices.
To determine if your motherboard supports RGB, you can take the following steps.
First, check the motherboard's specification sheet or official website to find information about RGB functionality.
Secondly, check whether there is an RGB interface or slot on the motherboard, usually a 4-pin or 3-pin interface. If so, then the motherboard most likely supports RGB.
In addition, you can also download the software provided by the motherboard manufacturer, such as RGB control software, to see if you can control and adjust the RGB lighting effects.
Finally, you can also check the motherboard’s user forum or community to learn about other users’ experiences and feedback to determine whether the motherboard supports RGB functionality. Remember, before buying a motherboard, it’s best to confirm whether it supports the RGB functionality you need.
The above is the detailed content of Does the RGB interface support the motherboard?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
