php Editor Baicao The method for setting F1 on the ASUS motherboard is as follows: First, turn on the computer and enter the motherboard BIOS interface. Generally, press the DEL key or F2 key to enter. The specific key values may vary depending on the model. So please operate according to your motherboard model. After entering the BIOS interface, use the arrow keys to select the "Advanced" option, then find the "Boot" option, where you will find "Boot Configuration" or a similar option. In the options, find the "Enable F1 BIOS POST Message" option and set it to "Enabled" state. After completing the settings, save and exit the BIOS interface, the computer will restart, and information related to the F1 key should be displayed when booting.
You need to press the F1 key to start the computer. This is mainly caused by the inconsistency between the settings in the BIOS and the real hardware data.
1. In fact, there is no floppy drive or the floppy drive is broken, but there is no floppy drive in the BIOS. There is a floppy drive set up, so you have to press F1 to continue.
2. If the motherboard battery is out of power, it will also cause data loss and this fault will occur.
3. Restart the system, enter the BIOS settings, and find that the floppy drive is set to 1.44M, but there is actually no floppy drive in the chassis. After setting this item to NONE, the fault is eliminated.
Many people have asked this question. Here is a summary of the problems I have encountered. I hope it will be helpful to everyone.
1. Hareware Monitor found an error, enter POWER MANAGEMENT SETUP for details, Press F1 to continue, DEL to enter SETUP
中文：The monitoring function found an error, enter POWER MANAGEMENT SETUP to view detailed information , press the F1 key to continue the boot process, and press the DEL key to enter COMS settings.
Explanation: Some motherboards have hardware monitoring functions. You can set the temperature monitoring of the motherboard and CPU, the voltage output level monitoring of the voltage regulator, and the monitoring of each fan speed. When
If the above monitoring function detects an abnormality when starting up, the above paragraph will appear. At this time, you can enter the COMS settings and select POWER MANAGEMENT SETUP. On the right, **Fan Monitor**, **Thermal Monitor** and * *Voltage Monitor** See which part raised the exception and then resolve it.
2. pri slave drive-ATAPI LNCOMPatible press F1 to Resume
It may be that your optical drive is not connected properly or is faulty. It is best to set each IDE port to automatic in CMOS.
3. Press F1 to continue,DEL to enter SETUP
Press DEL to enter BIOS after booting, select NONE in the floppy drive, and press F10 to save.
4 , CMOS checksum error－Defaults loaded
Press F1 to contnue?DEL to enter SETUP
08／09／2000－i810－ITE8712－6A69ME1CC－00
cmos battery is empty electricity.
5. Warning! CPU has been changed! Please Enter CPU speed CMOS setup and Remember to save Before Exit!
This means that the BIOS settings have been flushed and the BIOS needs to be reset (also called CMOS settings). Turn on the computer and hold down the "Del" key to enter settings and read your motherboard manual. What is your CPU frequency? You need to select the FSB in the BIOS. The frequency multiplier is locked anyway. The FSB is always 66, 100 or 133, depending on the CPU model, set from low to high. If it is the BIOS setting of AWARD, select Frequency/Voltage Control on the homepage. Use this menu to make special settings for frequency and voltage. Among them, "Clock By Slight Adjust" allows you to select the CPU clock frequency. The BIOS settings of various motherboards are different. You can refer to your own motherboard manual for adjustments.
6. cpu has been changed please re-enter cpu settings in the cmos setup and remember to save before quit!
Some motherboards have an FSB jumper. The default is 100MHZ. Some motherboards do not support automatic frequency adjustment. You only need to enter the BIOS and set the FSB to the standard FSB of your CPU. The frequency multiplier is usually set automatically, and it is best not to overclock.
If none of the above solutions can solve the problem, you can check whether the circuit next to the CMOS has any signs of burnout. My machine has a problem with the circuit next to the CMOS. I have tried all the above solutions and it has no effect. Use it, and it's done with the last soldering iron. Haha, you might as well try it!
Troubleshooting the need to press F1 to enter the system when booting up
Under normal circumstances, the requirement to press F1 to enter the system is caused by minor problems in the system's BIOS settings that do not affect system startup, so Please check whether the hardware information settings in the BIOS are inconsistent with the actual settings.
Generally common faults are:
1. The battery on the motherboard is out of power.
Solution: Replace the motherboard battery.
2. You have set up a floppy drive to start, but there is a problem with your floppy drive.
Solution:
a. Press DEL to enter bios when booting, follow the boot sequence, and close the floppy drive to boot.
b. Turn off the boot floppy drive detection function:
Start the computer, and then press the key to enter the BIOS setting main interface;
Select the "Advanced BIOS Features" setting item and press the Enter key Enter;
Set "Boot Up Floppy Seek" to "Disabled", so that you can turn off the boot software detection function
If the ASUS motherboard wants to detect an F1 error in the BIOS, usually this problem is not a fatal failure and can be turned off directly in the motherboard.
Solution:
Take the ASUS motherboard as an example. After booting, press the "DEL" key repeatedly to enter the motherboard BIOS settings, and press the F7 key to enter "Advanced Mode" ).
1. Find the startup tab (BOOT) and enter the startup setting options.
2. Find "Wait to press the F1 key if an error occurs", select the drop-down menu, and change it to "Disabled".
3. After confirming the change to "Disabled", we press the F10 key to save and exit the BIOS.
ASUS motherboard prompts that you need to press the F1 key when booting, which can be solved in the following ways:
1. After booting, click the F2 key or the DEL key to enter the BIOS interface;
2. Click the F7 key to enter the advanced mode;
3. In the advanced mode, find the "Startup" item and turn off the "Wait for pressing the F1 key if an error occurs" setting.
Follow the above steps to close the interface that prompts F1 at startup.
1. After booting, click the F2 key or DEL key to enter the BIOS interface;
2. Click the F7 key to enter the advanced mode;
3. In the advanced mode, find the "Startup" item and turn off the "Wait for pressing F1 key if an error occurs" setting. Follow the above steps to close the interface that prompts F1 at startup.
If the F1 prompt appears when your ASUS motherboard is turned on, it may be due to one of the following reasons:
1. The BIOS is set incorrectly: If the BIOS is set incorrectly on your motherboard , may cause the F1 prompt to appear when booting. You can try going into BIOS settings and check if there are any wrong settings. You can also use another computer's BIOS setup reference file to help you fix incorrect settings.
2. Motherboard failure: If the motherboard fails, it may also cause the F1 prompt to appear when booting. You can try going into BIOS settings and check if there are any wrong settings. You can also contact ASUS customer service team for assistance.
3. Hardware failure: If other hardware (such as CPU, memory or graphics card) fails, it may also cause the F1 prompt to appear when booting. You can try going into BIOS settings and check if there are any wrong settings. You can also contact ASUS customer service team for assistance.
If you cannot solve the problem, you can try the following steps:
1. Turn off the power: Turn off all power and wait a few minutes for all hardware to cool down.
2. Plug in the power adapter: If your power supply is damaged, it may also cause the computer to fail to start. You can try plugging in the power adapter to get power.
3. Clean the motherboard: If there is too much dust on your motherboard, it may also cause the computer to fail to start. You can try using a soft-bristled brush to clean the dust off the motherboard.
4. Replace the power supply: If your power supply is damaged, it may also cause the computer to fail to start. You can try replacing the power supply to get power.
5. Contact ASUS customer service team: If you cannot solve the problem, you can try to contact ASUS customer service team for help.
The above is the detailed content of How to set the boot F1 key function on the ASUS motherboard?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
