php Xiaobian Yuzi ASUS motherboard is a high-performance computer motherboard with powerful overclocking functions. When overclocking with an Asus motherboard, it is important to save your overclocking settings to avoid resetting or losing your personalized settings. Saving your overclocking settings is very easy, just follow the steps below. First, enter the motherboard's BIOS setup interface. Then, find and select the Save & Exit option. Next, select the Save Changes & Reset option. Finally, wait for the computer to automatically restart to complete the operation of saving the overclocking settings. In this way, even if you restart your computer, the overclocking settings will be retained, allowing your computer's performance to continue to improve.
The specific steps for ASUS motherboard to save overclocking settings are as follows:
1. Enter the BIOS settings. Press the Del key or F2 key when booting to enter the BIOS interface.
2. In the BIOS interface, find the AI Tweaker tab.
3. In the AI Tweaker tab, select the CPU parameters you wish to overclock and increase its frequency. Depending on your CPU model, different parameters may vary.
4. After the settings are completed, press the F10 key to save the settings and exit the BIOS.
5. After the system boots, download and install the software program CPU-Z to view the system clock frequency. If you need to verify the stability of the system, you can download other software such as OCCT or Prime95 to test whether your system performs normally after overclocking.
6. If your system is stable and there are no abnormalities, you only need to restart the configuration once.
It should be noted that the manufacturer's updated BIOS may reset settings. Therefore, you need to back up and save your BIOS configuration regularly to ensure that your overclocking settings are not lost. ASUS motherboards have a function called "ASUS SaveProfile", which can save the configuration file after BIOS settings, and then you can choose to save it in a U disk, hard disk, cloud, etc., in case you need it.
Solution
1.
The method to cancel overclocking is very simple, clear the cmos and restore the bios default value
2.
According to the different motherboard BIOS, press DEL, F1, etc. to enter the bios setting interface, move the cursor to the "Load Optimized Default" item, then press Enter, press F10 and press Enter to restart, you can restore the CPU default frequency.
3.
Or shut down, unplug the power, find the motherboard CMOS jumper, two or three jumper pins with the word CMOS written on the PCB, and insert the pin cap to position 23. Restore to original after two minutes
Asus motherboard, the specific steps to set overclocking are as follows:; The materials we need to prepare are: computer,;
1. First, we press the "DEL" key when booting to enter the BIOS in mode. ;
2. Then we choose to open "Ai Tweaker" in the pop-up window. ;
3. Then we click to open Ai Overclock Tuner in the pop-up window and change it to X.M.P.
Asus motherboards can be set for overclocking in the Ai Tweaker menu in the BIOS. The specific steps are as follows:
1. After booting, click the DEL key to enter the BIOS interface:
2. Select the Ai Tweaker menu, change the Ai Overclock Tuner (overclocking adjustment) to X.M.P. , and then the eXtreme Memory Profile option will appear below. Here you can select the XMP profile built into the memory, change it to the desired one, and save it. XMP overclocking can be configured through the above settings.
Asus motherboard, the specific steps to set up overclocking are as follows:
The materials we need to prepare are: computer,
1. First, we press "DEL" when booting key to enter BIOS mode.
2. Then we choose to open "Ai Tweaker" in the pop-up window.
3. Then we click to open Ai Overclock Tuner in the pop-up window and change it to X.M.P.
This depends on your specific motherboard model and CPU model. In ASUS motherboard overclocking settings, you usually need to enter the BIOS or UEFI interface and adjust some parameters, such as CPU multiplier, base clock, voltage, etc. However, overclocking may cause damage to the CPU and motherboard, so it is recommended that you understand the operation and risks.
It is recommended that you first understand your motherboard model and CPU model before overclocking. You can refer to the motherboard overclocking guide provided by ASUS official website or search for relevant tutorials on the Internet.
Press the esc key when booting to select the startup item, and then select the USB disk to start.
If you do not find the required startup item, you can set it in the bios and then restart the selection.
First boot F2 and enter the bios settings as follows:
1.Boot->Launch CSM->Enabled
2.Security->Secure Boot Control-> Disabled
3. If CSM cannot be set, first set Secure Boot Control, save the settings and exit bios, and then re-enter to set CSM.
4. Insert the USB flash drive and press esc when booting to select the USB flash drive to start.
Asus motherboards generally come with some overclocking functions, allowing you to enhance the performance of CPU, memory and other hardware by adjusting parameters such as main frequency, multiplier and voltage.
1. Enter the BIOS interface
First, you need to enter the BIOS interface of the ASUS motherboard. This can be achieved by pressing the F2 or Delete key on the keyboard when booting. After entering the BIOS interface, you need to use the arrow keys to find the Advanced option, and then select overclocking-related options such as CPU Configuration or Overclocking.
2. Set the main frequency and multiplier
In the BIOS settings of the ASUS motherboard, you can adjust parameters such as the CPU main frequency and multiplier to achieve the effect of overclocking. Among them, the main frequency represents the working speed of the CPU, generally in GHz; and the frequency multiplier represents the ratio of the internal operating speed of the CPU to the external bus speed. Here, you need to make settings based on the actual conditions of hardware such as CPU and memory. In addition, when setting the main frequency and frequency multiplier, be careful not to exceed the hardware specifications, otherwise it will cause damage to the hardware.
3. Adjust the voltage
Adjusting the voltage is also a key parameter that needs to be paid attention to during the overclocking process. Generally speaking, when improving the performance of hardware such as CPUs, the voltage needs to be increased at the same time to ensure stability. However, too high a voltage can also have a negative impact on the CPU, resulting in shortened life or unstable builds, so caution is needed when adjusting voltage. In the BIOS settings of the ASUS motherboard, you can find voltage setting options such as Vcore and make appropriate adjustments.
4. Save settings and test
After you complete the settings of the above parameters, you need to press the F10 key to save and exit the BIOS interface. Next, you need to test the computer to ensure that the performance and stability after overclocking are as expected. You can use some professional testing software, such as Prime95 and CPU-Z, for testing and monitoring.
In short, the BIOS overclocking function of ASUS motherboard can help you easily enhance the performance of CPU, memory and other hardware, but it also requires you to operate with caution to avoid damage to the hardware.
The above is the detailed content of What are the methods to save overclocking settings on ASUS motherboards?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
