How to deal with network port failure on the motherboard?

php Xiaobian Yuzai If your motherboard network port is broken, don’t panic! First, you can try to reinstall the network card driver. Sometimes driver problems will cause the network port to not work properly. If this doesn't work, you can consider using a PCI network card or USB network card as an alternative. These external devices can be plugged into the expansion slot or USB interface on the motherboard to provide network connectivity. In addition, if you have some computer technical knowledge, you can also try to repair the network port or replace the motherboard. In short, if you encounter a broken network port on your motherboard, don’t worry, there are a variety of solutions to choose from.

What should I do if the network port on the motherboard is broken?

Can be repaired.

Method 1:

1. The network port models used are different depending on the motherboard, and generally cannot be used universally;

2. If you want to replace it by yourself, you need to use a soldering iron or soldering iron. device and solder wire.

3. Remove the motherboard, use a soldering iron and a solder extractor to remove the tin from the network port, and remove the network port.

4. Align the purchased new network port with the pin position of the motherboard and install it. Then add tin and it will be ready for use (no tin connection).

How do you view the motherboard network port as gigabit?

To determine whether the network port on the motherboard supports Gigabit connection speed, you can judge in the following ways.

First, find the network adapter in the device manager and view its properties. If the link speed is displayed as 1 Gbps, it means that this network port supports Gigabit connection speed.

Secondly, open the Network and Sharing Center in the Control Panel, find "Change Adapter Settings" on the right, then right-click the desired network adapter, select "Status", and in the "Speed" column , if it displays 1000 Mbps, it means that this network port supports Gigabit connection speed.

In addition, you can also check the motherboard model to determine whether it supports Gigabit network ports.

How to check the quality of the motherboard network port?

To check the quality of the motherboard network port, you can take the following steps.

First, make sure the network cable is connected properly and is not loose or damaged.

Then, check whether the network card driver in the device manager is installed normally.

Next, try to connect to other devices or computers to see if you can connect to the Internet normally. If you still can't connect to the Internet, you can try changing the network cable or connecting to another network port. If the problem persists, the network card hardware may be faulty and needs to be replaced or repaired.

Finally, you can consider using network testing tools to detect the speed and stability of the network port.

How to identify if the motherboard network port is broken?

First check whether the network cable connector has poor contact and eliminate the fault of the network cable itself. Generally speaking, the network card is difficult to break. If it is really broken, then buy a PCI network card and install it for about 25 yuan. money,

The above is the detailed content of How to deal with network port failure on the motherboard?. For more information, please follow other related articles on the PHP Chinese website!