Tutorial on how to set up solid state drive startup-Onda motherboard version

php editor Strawberry will introduce to you how to set up the solid state drive for Onda motherboard. As a high-speed storage device, solid-state hard drive can greatly improve the startup speed and operating efficiency of the system. Setting up the solid state drive to start on the Onda motherboard requires some simple operations. Let’s take a look at the specific steps below!

How to set up the solid state drive to start on Onda motherboard?

Onda motherboard sets the hard disk as the first startup item. The steps are:

1. First, find the position of the delete key on the keyboard.

2. Then, turn on the computer and keep pressing the delete key to enter the BIOS interface.

3. After entering the BIOS interface, select the advanced BIOS features interface.

4. After entering the advanced BIOS features interface, select the hard disk bootpriority option, which is the hard disk boot priority option.

5. Press F10 after completing the selection, select OK to save and exit.

How to wire the onda motherboard?

To connect to the onda motherboard, you first need to determine the model and specifications of the motherboard. Then, find the correct interface and slot according to the logo and instructions on the motherboard. Common connections include: CPU slot, memory slot, graphics card slot, hard disk interface, power interface, USB interface, etc. Make sure to insert and secure the cable or plug correctly, paying attention to the direction and order of wiring.

Finally, connect the power cord and monitor cable, and start the computer for testing. If you have any questions, it is recommended to refer to the motherboard's detailed instructions or seek professional help.

The most powerful motherboard under 300 yuan?

ONDA 9D4-DVH (Intel 100/LGA 1151) supports 6789 generation processor motherboard

Onda motherboard is not inferior to first-line brand motherboards in terms of workmanship and materials. The key is It can support the full range of Intel 1151 architecture CPUs, and also provides M.2 slots, dual DDR4 memory slots, the motherboard uses solid capacitors, and the integrated HDMI**GA interface is very suitable for various mainstream monitors.

How to connect the power cord to the Onda A75ma motherboard

First find the interface marked FPANEL on the motherboard. It should be a 9-pin interface, with a row of 4 pins and a row of 5 pins. Calculated by aligning one end, pin 4: the power indicator light is connected to PLED, the power indicator light - is connected to PLED-, the remaining 2 pins are the power switch, connected to POWER, regardless of positive or negative;

pin 5: the hard disk indicator light is connected HDD, the hard disk indicator light - is connected to HDD-, the next 2 pins are connected to the reset switch RST, and the remaining pin is empty.

The above is the detailed content of Tutorial on how to set up solid state drive startup-Onda motherboard version. For more information, please follow other related articles on the PHP Chinese website!