php editor Youzi will answer your question about the gtx750ti graphics card not lighting up. The gtx750ti graphics card is a graphics card with excellent performance, but sometimes the lights may not light up. There may be many reasons for the graphics card not lighting up, such as power connection problems, driver errors, etc. Before solving this problem, we need to double check the hardware connection and update the latest drivers. If the problem persists, we also need to consider whether the graphics card is damaged or has other hardware failures. Hope these tips can help you solve the problem of gtx750ti graphics card not lighting up.
If you have been using GTX750ti graphics card before, it is normal and no problem. Suddenly your motherboard P43 is burned. Now you have replaced it with ASUS G41 motherboard. When you plug in the GTX750ti 2G graphics card, there is no display. If you plug it in There is no display when the graphics card is powered by 6 pins. It is estimated that the graphics card also burned the independent graphics card when it burned the motherboard. If you use the G41 integrated graphics card, it works fine. It means that the problem is with the independent graphics card itself.
1. There is generally no compatibility between the motherboard and the graphics card. As long as the interfaces are the same, they can be lit.
2. Check whether the signal cable of the monitor is connected to the graphics card output interface. If the connection is correct, try replacing a cable with better quality.
3. It may also be caused by poor contact between the graphics card and the motherboard. When the graphics card is re-inserted and unplugged, the golden finger part must be completely in contact with the PCI slot of the motherboard.
4. The monitor signal source must be switched correctly. Some monitors have an AUTO icon in the lower right corner. Click on it.
5. If the graphics card has an auxiliary power supply line, it needs to be connected properly. It is recommended to use some good quality brand power supply as much as possible. If you have tried the above methods and still cannot light up, it is recommended to contact the seller to replace or repair the graphics card.
You can refer to the following steps:
1. Turn on the computer and press F2 to enter the BIOS, select secure boot menu in the security tab, secure boot control press Enter to select Disable, press F10 to save;
2. After the computer restarts, click F2 to enter the BIOS, select Launch CSM in the boot tab, press Enter to select Enable, and press F10 to save;
3. Restart the computer and click esc to select Startup item, select the corresponding startup method.
First of all, you need to make sure that your motherboard is powered by the chassis and is it running normally? If the chassis power supply is not running, there may be a problem with the chassis power supply, and it will definitely not light up.
If your ASUS B550M motherboard with AMD Ryzen 5 5600X processor fails to boot and the display fails to light up after installation, there may be some possible reasons and solutions below:
1. BIOS Compatibility: Since Ryzen 5000 series processors are based on the Zen 3 architecture, your motherboard's BIOS may need to be updated to be compatible with them. Please confirm that your motherboard has the latest BIOS version and upgrade if needed. You can get detailed steps on how to upgrade BIOS from the official ASUS website or ASUS technical support.
2. Power connections: Make sure all necessary power connections are correct. Check whether the motherboard power supply cable is plugged in tightly, and ensure that both the 8PIN EPS and 24PIN main power connectors are connected correctly.
3. Memory slot: Check the memory slot to ensure that the memory module is correctly inserted and firmly connected to the seat. If you need to use multiple memory modules, please try to install each memory module individually to ensure that they are not faulty. You also need to make sure that the memory you use is compatible with your motherboard.
4. Reset CMOS: Try to clear CMOS to restore the motherboard default settings. Turn off the computer, remove the backup battery, wait a few minutes, and then plug it back in. This will reset the motherboard's BIOS configuration. Please make sure you have disconnected all power sources and external devices before doing this.
5. Component failure: If you are still experiencing problems, it is possible that a hardware component is faulty. Try removing and reinstalling the processor, memory, etc. one by one to determine if any components are damaged or there are socket issues.
If you are not familiar with computer hardware repair, it is recommended to consult ASUS official technical support or seek professional computer repair help. They can provide more specific guidance and diagnosis, and help resolve problems.
Hello, when the ASUS motherboard A88XM-A does not light up, there may be several reasons:
1. Power supply problem: First, make sure that the power cord is connected properly and the plug is not loose. You can try changing the power cord or outlet to see if that solves the problem.
2. Memory problem: Check whether the memory module is installed correctly and try to reinstall or replace the memory module to see if the problem can be solved.
3. Graphics card problem: If you use an independent graphics card, check whether the graphics card is plugged in properly and try to re-insert or replace the graphics card to see if the problem can be solved. If you are using an integrated graphics card, you can try to use a discrete graphics card or replace the integrated graphics card to troubleshoot the problem.
4. CPU problem: Check whether the CPU is plugged in properly, try to replug or replace the CPU to see if the problem can be solved.
5. Motherboard failure: If the above steps cannot solve the problem, the motherboard itself may be faulty. You can try to contact the after-sales service center for repair or replacement of the motherboard.
Please note that you should be cautious when operating hardware to avoid further problems caused by incorrect operation. If you are not sure how to proceed, it is recommended to seek professional help.
1. Press F12, there is an option to select U disk boot. 2. For some old motherboards, you have to plug in the U disk before the U disk option will appear. It is parallel to the hard disk and belongs to the hard disk boot. Boot into the hard disk, 3. Enter it and select the hard disk or U disk. There are two ways to solve the problem of pressing F1 to boot the ASUS motherboard:
1. Change the hard disk interface.
Connect the hard drive data cable (usually the red one) to the motherboard interface on SATA1. This fundamentally solves this problem. The prompt interface will also disappear.
If it is an IDE, please jumper the hard disk to the main disk.
2.BIOS settings.
You can turn off the F1 prompt in the bios, so you don’t have to press F1 when booting.
Usually the power supply is normal and the motherboard connection is normal. The motherboard indicator light should be on when the power is on. At this time, the motherboard is not working and the power supply is not working. Press the power button to turn on the power supply, and turn the fan to the motherboard to work. Judging from the description of the phenomenon, it should be a power supply problem. First check the power cord, wiring, and drag strip, and then use another computer power supply to test the machine. If there is no problem with the power supply, it is the motherboard. A power problem is more likely.
The above is the detailed content of GTX750Ti graphics card cannot start?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
