How to remove the CPU from the motherboard

How to remove the CPU

Removing the CPU Steps: First open the computer host. Let’s first understand that there is a CPU fan on the motherboard CPU, and the fan also has a power cord. Connect the power supply. Let's unplug the fan power cord first. Then turn the button on the four pillars of the fan. After turning the button, pull the pillars upward, so that the pillars are peeled off the motherboard in turn.

How to disassemble the computer CPU: First, we use a screwdriver to disassemble the "host". After taking it apart, take out the motherboard and you can see the largest fan, which is the "cpu fan". Then use a screwdriver to remove the fan screws and disassemble the "CPU fan" to see the CPU underneath.

Step 1: Turn off the computer. Before operating any computer components, you must first turn off the computer and unplug the power plug. This is to ensure that the computer does not suffer any damage. Step 2: Find the CPU slot. The CPU slot on the computer motherboard is usually located in the center of the motherboard and is usually covered with a small cover.

How to remove the computer CPU

The CPU on the computer motherboard is pressed under the big fan in the chassis, so to remove the CPU from the motherboard, you must first remove this Remove the fan first. The way to remove the fan is to twist the fixing pin pointed by the arrow in the picture below.

How to disassemble the computer CPU: First, we use a screwdriver to disassemble the "host". After taking it apart, take out the motherboard and you can see the largest fan, which is the "cpu fan". Then use a screwdriver to remove the fan screws and disassemble the "CPU fan" to see the CPU underneath.

Step One: Shut Down the Computer Before working on any computer components, you must first shut down the computer and unplug it from the power source. This is to ensure that the computer does not suffer any damage. Step 2: Find the CPU slot. The CPU slot on the computer motherboard is usually located in the center of the motherboard and is usually covered with a small cover.

First turn on the computer host. There is a CPU fan on the motherboard CPU. The fan is also connected to a power cord for power supply. Unplug the fan power cord. Turn the button on the four pillars of the fan. After turning the pillar button, pull the fan upwards and operate in sequence. The pillars will be peeled off the motherboard. After pulling out all the pillars, pick up the CPU fan.

How to remove the CPU from the motherboard

1. The CPU on the computer motherboard is pressed under the big fan in the chassis, so you need to remove the CPU from the motherboard, then The fan must be removed first. The way to remove the fan is to twist the fixed latch pointed by the arrow in the picture below.

2. First turn on the computer host. There is a CPU fan on the motherboard CPU. The fan is also connected to a power cord for power supply. Unplug the fan power cord. Turn the button on the four pillars of the fan. After turning the pillar button, pull the fan upwards and operate in sequence. The pillars will be peeled off the motherboard. After pulling out all the pillars, pick up the CPU fan.

3. First open the computer host. Let’s first understand that there is a CPU fan on the motherboard CPU, and the fan is connected to a power cord for power supply. Let's unplug the fan power cord first. Then turn the button on the four pillars of the fan. After turning the button, pull the pillars upward, so that the pillars are peeled off the motherboard in turn.

4. Step 1: Turn off the computer. Before operating any computer components, you must first turn off the computer and unplug the power plug. This is to ensure that the computer does not suffer any damage. Step 2: Find the CPU slot. The CPU slot on the computer motherboard is usually located in the center of the motherboard and is usually covered with a small cover.

5. Press down hard and move the pressure lever sideways. Open the pressure lever first before opening the CPU cover. Try to operate with both hands, pulling the lever with one hand and opening the cover with the other. The opening angle of the pressure lever is slightly greater than 110 degrees. If there is a CPU protective plate when opening the cover, be sure to remove the CPU protective plate after opening the cover.

How to disassemble a laptop CPU

First, you need to prepare some tools: a screwdriver, a piece of plastic card, some alcohol and cotton. Next, you need to unplug the computer's power cord and battery to ensure that the computer is completely powered off.

First remove the screws on the back, so that the optical drive and storage hard drive can be removed. Then remove the keyboard and remove the front screws. (Some require disassembling the monitor, some do not.) Removing the motherboard is the process of replacing the CPU.

Step One: Shut Down the Computer Before working on any computer components, you must first shut down the computer and unplug it from the power source. This is to ensure that the computer does not suffer any damage. Step 2: Find the CPU slot. The CPU slot on the computer motherboard is usually located in the center of the motherboard and is usually covered with a small cover.

Removing the CPU: Hold the CPU with both hands and lift it upwards, carefully and gently remove it from the socket. Be careful not to damage the socket or CPU. Dispose of old CPUs: If the old CPU can be used in another device, it should be stored in a safe place. Otherwise please use safe disposal methods provided by e-waste recycling centres.

How to remove the computer CPU

1. The CPU on the computer motherboard is pressed under the big fan in the chassis, so to remove the CPU from the motherboard, you must first Take off the fan first. The way to remove the fan is to twist the fixing pin pointed by the arrow in the picture below.

2. How to disassemble the computer CPU: First, we use a screwdriver to disassemble the "host". After taking it apart, we can take out the motherboard and see the largest fan, which is the "cpu fan". Then use a screwdriver to remove the fan screws and disassemble the "CPU fan" to see the CPU underneath.

3. First turn on the computer host. There is a CPU fan on the motherboard CPU. The fan is also connected to a power cord for power supply. Unplug the fan power cord. Turn the button on the four pillars of the fan. After turning the pillar button, pull the fan upwards and operate in sequence. The pillars will be peeled off the motherboard. After pulling out all the pillars, pick up the CPU fan.

4. You can gently pry it until it pops out of the slot. Make sure not to use excessive force or improper disassembly tools when removing the CPU to prevent damage to the CPU or other devices.

5. Open the computer case and find the CPU socket: Use a screwdriver and gloves to open the computer case and locate the CPU socket. The exact location and size vary by computer model. Before removing the CPU, remove the heat sink (if applicable).

6. Unlock the CPU socket: Find the CPU socket on the motherboard. This is usually a square slot that may have a protective metal cover nearby. If there is a metal protective cover, undo the retaining screws or buckles next to the slot and remove it. Remove the CPU: Gently pull up on the heatsink, being careful not to twist or apply too much force.

The above is the detailed content of How to remove the CPU from the motherboard. For more information, please follow other related articles on the PHP Chinese website!