The Vanhe water heater burned through the water tank after being used for more than two years. Is it a quality problem? How much does it cost to replace a water tank?

php editor Zimo, hello! Regarding the issue you mentioned about the Vanhe water heater, if it burns through the water tank after being used for more than two years, there may be a quality problem. The cost of replacing the water tank will be determined based on the water heater model and the charging standard of the repair point. It is recommended that you contact the after-sales service center or repair point for consultation. They will give a specific quotation and related maintenance suggestions. In addition, it is also recommended that when purchasing a water heater, you choose a product with a good brand reputation and complete after-sales service to ensure quality of use and after-sales protection. Hope this helps!

Wanhe water heater burned through the water tank after being used for more than two years. Is it a quality problem? How much does it cost to replace a water tank?

When and what model did you buy? What price range is the machine?

Since the addition of alloy water tank water heaters by Vanhe in 2009, there have been more water tank failures. If it is a copper water tank, it will generally last three or four years without much problem. If it is an alloy water tank, it will last two years. It's long.

If you want to replace the water tank, the copper one is about 200. If your water heater is an alloy water tank that was produced in the past year or two, you cannot replace the copper water tank.

Remember that Wanhe should replace the alloy water tank for free. They only charge a labor fee, which is probably a few dozen yuan. hope this helps.

How to remove the mainboard of Wanhe water heater?

1 First, find the three knobs on the panel of the gas water heater. To remove the panel, you must first pull out the three knobs. If a knob cannot be pulled out by hand, insert the prepared flat-blade screwdriver into the panel. Go into the gap of the knob, find the tail of the knob shaft, and use a flat-blade screwdriver to pry the tail, then gently use the lever principle to pry it. Once loose, you can pull it out by hand.

2 Secondly, find the bottom of the gas water heater. There are cross screws at the bottom. Find the screws connected to the panel and use a cross screwdriver to remove them. Remember, they are the screws connected to the panel. The screw locations on the panel of the gas water heater are different. Different, as long as you find the split point of the panel interface, you can find the position of the panel screws. Do not remove the screws in other parts.

After the bottom screws are removed, the gas water heater can be opened like a flip phone. If you find it inconvenient, you can remove the top screws of the gas water heater so that the entire panel can be disassembled.

3 After the panel disassembly is completed, the internal structure of the gas water heater will be presented to you.

Wanhe water heater motherboard repair?

1. Press the DIP switch again and check whether it is pulled in place; 2. Check the main control board of the DIP switch and replace it directly if it is damaged. Note: It is recommended to contact professional after-sales personnel for replacement of such electrical appliances to avoid danger.

Is it worth repairing the main board of Wanhe water heater if it is broken?

If there are no other problems but the main board of the water heater is broken, it is still worth repairing. If the gas water heater has been used for a long time and it is time to replace it, then don't repair it. If it has been used for a long time without time, then find a worker to repair it and you can continue to use it.

The above is the detailed content of The Vanhe water heater burned through the water tank after being used for more than two years. Is it a quality problem? How much does it cost to replace a water tank?. For more information, please follow other related articles on the PHP Chinese website!