1. The monitor has a black screen. Faults are relatively common, often manifesting as no image display on the monitor after the computer is turned on, but a "beep" sound is heard when the host starts normally; or the monitor suddenly goes black when it is being used; sometimes the computer starts normally, but when the computer starts up to a certain step A black screen appears.
2. Troubleshooting method: First check whether the replaced graphics card model is compatible. For example, if the old graphics card is ATI, but the graphics card is replaced by an NVDIA graphics card, this will definitely not work. The old graphics card driver is still on the computer, and it will definitely not work if the new graphics card is not compatible with the old one.
3.: First of all, generally speaking, the monitor shows no signal because the monitor’s data cable has fallen off. Make sure the connection is normal. 2: If the monitor shows no signal, it may be that the monitor’s data cable is broken and the data cable needs to be replaced.
4. Check whether the motherboard's graphics card socket matches the socket of your new graphics card. Whether the motherboard socket is divided into AGP and PCI-E.
5. Independent graphics card. If it is a dual graphics card, it should be connected to the PCIE interface closest to the CPU.
6. Computer host failure (1) Failure caused by host power supply. Black screen failure caused by damage to the host power supply or poor quality of the host power supply is very common.
The independent graphics card has insufficient power supply. Because the output power of the power supply is too low and there is no independent power supply interface, the independent graphics card has insufficient power supply and cannot light up. You need to check whether the 6PIN or 8PIN power supply interface of the independent graphics card is plugged in properly. Bad contact with the graphics card.
If the monitor does not have power (the indicator light does not light up), look at the back of the monitor, plug the power cord plug connected to the monitor upwards, and check whether there is power from the other end of the power cord to the socket.
You can refer to the following methods and try them one by one: If there is a BIOS setting problem, you can stop using the integrated graphics card on the motherboard in the BIOS. Different motherboards have different stopping methods. For details, please check the motherboard manual. Jumper issue.
1. Possible reasons: 1. The accessory power supply of the graphics card is not connected or is not in good contact. Please check the accessory power supply. 2. The graphics card has poor contact. It is recommended to shut down the computer and wipe the gold finger before reinstalling it. 3. The power of the power supply is not enough. Please confirm whether the power supply is sufficient. 4. The graphics card itself or equipment other than the graphics card is defective. It is recommended to change the platform or contact the dealer for confirmation.
2. If the motherboard does not have an integrated graphics card and the monitor does not light up after installing the independent graphics card, it means that the video signal output by the graphics card is not received. Check the contact of the graphics card and reinsert it. If it does not work, try replacing the graphics card. . 3. Check whether the graphics card has an independent power supply and whether the power supply is connected properly.
3. The main reasons why the black screen does not light up after the graphics card driver is installed are as follows: The driver version is incompatible. The latest driver version may be incompatible with the system or current hardware, causing a black screen. You can try to download an older compatible driver and install it. System files are corrupted.
4. If the above does not solve the problem, consider that the independent graphics card is not compatible with the motherboard. You can go to the motherboard's official website to see which types of graphics cards the motherboard can support, and then change the graphics card according to the model. Finally, the signal wiring needs to be checked. The monitor side and the independent graphics card side must have the same type of interface at both ends.
5. Check whether the graphics card is fully inserted into the PCI slot of the motherboard; check whether the power interface is connected and whether the light can be lit; re-plug the signal output from the monitor and graphics card or replace the wire; check the power supply to see if the power consumption of the power supply is sufficient.
6. Reason: The graphics card is installed incorrectly, causing the motherboard to be unable to recognize the graphics card, causing the monitor to not display. In this case, you need to remove the graphics card and reinstall it according to the installation instructions in the manual. The monitor's cable is still plugged into the motherboard, not the discrete graphics card.
1. ☆Poor contact with the graphics card, shut down the computer, unplug it again and clean the PCI-E slot of the graphics card or plug it in with the gold finger of the graphics card and try again . ☆The rated power of the computer power supply is too low. Generally speaking, computers with more than four cores and independent power supply have relatively high power consumption. It is also common for computers with poor power supply to be unable to drive the graphics card.
2. The quality of the independent graphics card is damaged. Solution: Replace the independent graphics card. The problem with the independent graphics card slot can be solved by re-inserting and unplugging the independent graphics card. Independent graphics card installation method: Find the graphics card slot on the motherboard and insert the graphics card into the slot.
3. If the computer originally had an integrated graphics card, you need to connect the integrated graphics card, install the driver for the independent graphics card, and then set the independent graphics card as the main screen output.
4. The graphics card has poor contact. Shut down the computer, unplug it again, clean the PCI-E slot of the graphics card or plug it in again with the gold finger of the graphics card.
5. Generally, independent graphics cards require independent power supply. You can check whether the power interface is plugged in properly, or check whether the power supply has a power interface. If not, you need to replace the power supply. Poor contact with the graphics card will also cause the monitor to not light up. You can unplug the graphics card slot again and then plug it in again to try.
6. You can refer to the following methods and try them one by one: If there is a BIOS setting problem, you can stop using the integrated graphics card on the motherboard in the BIOS. Different motherboards have different stopping methods. For details, please check the motherboard manual. Jumper issue.
1. The black screen is caused by the monitor itself not working properly, such as a problem with the monitor's power cord and the power plug contacting Defective (note: both ends are possible), the power switch is broken, the internal circuit of the monitor is faulty, etc.
2. The driver version is incompatible. The latest driver version may be incompatible with the system or current hardware, causing a black screen. You can try to download an older compatible driver and install it. System files are corrupted. Some system files may be damaged during driver installation, resulting in a black screen.
3. Poor contact with the graphics card will also cause the monitor to not light up. You can unplug the graphics card slot and plug it in again to try. Generally, independent graphics cards require independent power supply. You can check whether the power interface is plugged in properly, or check whether the power supply has a power interface. If not, you need to replace the power supply.
4. Press F8 repeatedly when booting, select safe mode, and after entering the system, uninstall the graphics card driver through Control Panel-Device Manager.
1. ☆The rated power of the computer power supply is too low. Generally speaking, the power consumption of computers with more than four cores and independent power supply is relatively high. If the power supply is poor, it will definitely not be able to drive the graphics card. It is also common.
2. A black screen caused by the monitor itself not working properly, such as a problem with the monitor's power cord, poor contact with the power plug (note: both ends are possible), a broken power switch, or a faulty internal circuit of the monitor. wait.
3. Whether the power supply meets the operation requirements of the new graphics card, and whether the graphics card fan is turned on. If these are ruled out, if it just goes black immediately after entering the system, it is a conflict between the old graphics card driver and the new graphics card.
4. Secondly, if there is a display at the beginning but a black screen after entering the system, the graphics card driver is not normal or the resolution is adjusted too high. You can enter the safe mode and delete the graphics card driver and reinstall it; if the integrated display is normal and the independent display is used, If the screen appears black, the graphics card itself is faulty or is incompatible with your motherboard. You can try replacing it.
5. After installing a new graphics card on your computer, you need to connect the video signal cable to the video signal cable interface of the graphics card instead of continuing to plug it into the integrated graphics card on the computer motherboard. interface, so that it can display normally.
The above is the detailed content of The computer screen does not light up after replacing the graphics card. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
