Lenovo r480 USB boot shortcut key

php editor Xinyi introduces to you the shortcut keys for Lenovo r480 u disk startup. When using Lenovo r480 laptop, sometimes we need to start the system or perform other related operations through a USB flash drive. To achieve this function, we need to press specific shortcut keys. What is the shortcut key for Lenovo r480 USB boot? Let us find out together below.

In addition to this friend, there are other people who also have doubts about this. Next, the editor will share the detailed operation method.

First of all, we need to use the Laomaotao winpe tool to create a U disk boot disk. After the production is completed, insert the USB flash drive into the computer and enter the BIOS settings. Please note that different brands of computers may have different methods of entering the BIOS interface. If you are not familiar with this operation, you can ask me via private message.

After entering the BIOS interface, switch to Boot. For example, for Lenovo Y480, select UEFI Boot and press Enter to set it to Enabled; for Shenzhou notebook, set the Boot mode select to UEFI under Boot.

But some computer models do not have UEFI options, such as ASUS notebook win8/win10 models without uefi option, Launch CSM is Disabled by default, and Secure Boot is turned on. When Secure boot is turned on, the boot disk, including the uefi boot disk, cannot be recognized, so Secure Boot must be disabled. When CSM is turned on, it indicates Legacy mode, and when it is turned off, it indicates UEFI mode.

After setting, press F10 to save the changes.

You will then enter the winpe interface and open the partition assistant. Convert the target disk where the system needs to be installed to a GPT disk and format the partitions. If the target disk is already a GPT disk, just partition or format it. In addition, before converting the MBR type to the GUID type, you need to delete all partitions and then convert.

How to do it?

Step 1: Click [Hard Disk]-[Convert Partition Table Type to GUID Format], a prompt box will pop up, click [OK].

Step 2: Save the operation in the first step, click [Save Changes]-[Yes].

Step 3: Select the hard disk, click [Quick Partition], and in the pop-up setting window, partition the disk. The number of partitions can be pressed It needs to be adjusted. Pay attention to the 4K alignment of the SSD partition.

After completing the above operations, return to the winpe desktop and open the one-click installation software to install the Ghost system~

learn more

The above is the detailed content of Lenovo r480 USB boot shortcut key. For more information, please follow other related articles on the PHP Chinese website!