php editor Xiaoxin answers the question "Cannot find the network card driver when installing a virtual machine on Mac". When installing a virtual machine, sometimes the network card driver may not be found, resulting in the inability to access the Internet. This is because the virtual machine does not have the relevant network card driver installed by default and needs to be set manually. In this article, we will introduce you how to solve this problem so that your virtual machine can be used normally on the Internet.
The virtual machine uses software to simulate the system and cannot find the wireless network card. It may be that the computer network card driver does not match the virtual machine. It is recommended to upgrade the driver and try again.
The reason minidwep gtk cannot discover the wireless network card is that it runs in a virtual machine environment. The virtual machine cannot directly use the built-in wireless network card to access the Internet. To solve this problem, consider using a USB wireless network card and loading it into the virtual machine. Another method is to use the wireless network card on the physical machine by booting cdliux. In this way, you can use the wireless network card of the physical machine to access the Internet in minidwep gtk.
3. First disable the wireless network card of the real machine; (wireless network cards generally cannot be used in both real machines and virtual machines at the same time).
A virtual machine is an environment virtualized through software (such as VMware, VirtualBox), rather than directly using the network card on the physical machine. Even if there is a built-in wireless card on the physical machine, the virtual machine cannot use it. Because the virtual machine is an independent and isolated environment, it cannot directly access the wireless network card on the physical machine.
1. minidwep gtk does not find the wireless network card. The reason is: minidwep gtk belongs to the virtual machine. It is not possible to use the built-in wireless network card to access the Internet in a virtual machine. You can use a USB wireless network card and load it into a virtual machine. Or boot cdliux directly from the physical machine to use the physical wireless network card.
2. First disable the wireless network card of the real machine; (wireless network cards generally cannot be used in both real machines and virtual machines at the same time).
The virtual machine only supports USB wireless network cards and cannot use the network card that comes with the notebook. Make sure to connect the USB wireless card to the virtual machine immediately when the virtual machine starts, otherwise it may not be recognized. If recognition issues occur, try restarting in the virtual machine to resolve them.
The method to solve the problem of not being able to detect the wireless network card is as follows: right-click the desktop computer icon, select Manage and open. Go to Computer Management, click System Tools, then select Device Manager. Check whether the device driver in the network adapter is normal.
First disable the wireless network card of the real machine; (wireless network cards generally cannot be used in both real machines and virtual machines at the same time).
The virtual machine shows that there is no network card. Just change the nat mode and go directly to the real machine signal.
Open the software, it will automatically detect whether the current driver is faulty and needs to be repaired. In the interface, click "Driver" → "Automatic Update" tab, then check the hardware list item whose driver is not installed correctly, and finally Click the "Update Now" button to perform the update operation.
The IP and DNS of the local connection are set to be obtained automatically. You can try to restore the router to factory settings. Set it up and then reset it again. Try updating the network card driver or reinstalling the network card driver. You can use driver life, driver wizard, 360 and other software to update or reinstall.
On the network adapter in the lower right corner of the virtual machine, observe whether the icon has a green light flashing. If the network adapter is gray, it means that the network of the virtual machine is not turned on, but is disabled. On the adapter Right-click the mouse, open [Settings], and check [Connected] and [Connect at startup].
Network adapter configuration issues: Check the virtual machine's network adapter settings to make sure they are set correctly. For example, confirm that the virtual machine's network adapter is properly connected to the host's network adapter and that the correct network connection type is selected (e.g., bridged, NAT, host mode, etc.).
It should be that the network is not connected. Enter 19161 on IE to enter the router and see. Extension: A virtual network is a computer network that contains at least partially virtual network links. A virtual network link does not include a physical connection between two computing devices, but is implemented through network virtualization.
Find and select "Microsoft KM-TEST Loop Adapter", then click "Next";.Select "Next", then Wait patiently for the installation; after the interface prompts that the installation is successful, we click "Finish"; return to the device manager, check the "Network Adapter", and you can see the virtual network card that has been added.
means that the network card is not loaded; click "Virtual Machine" - "Remove Device" - "Wireless Network Card Name" - "Connect or Disconnect from the Host", if CDlinux supports the USB wireless network card , the virtual machine can be loaded. If it still doesn't work, it is recommended to use a new wireless network card.
Then select the virtual machine to start, and quickly select the USB wireless network card to connect. If the connection speed is slower, the virtual machine will enter the system. Even if the connection is displayed, the corresponding wireless network card cannot be found in the virtual machine [Restart directly at this time Generally can solve the problem].
The virtual machine shows that there is no network card. Just change the nat mode and go directly to the real machine signal.
1. Check whether the network settings of the host are correct. If the virtual machine cannot obtain an IP address, there may be a problem with the host's network settings. You can check the host's network settings to make sure that the network to which the host is connected is working properly and that no firewall or network security settings are blocking the virtual machine's network connection. Restart the virtual machine and host.
2. The virtual machine can only find the virtual network card and cannot identify the network card on the host. However, USB devices are an exception. Current virtual machines can transfer USB devices from the host to the virtual machine for use. Therefore, unless your network card is a USB network card, the current virtual machine cannot find the network card on the host.
3. Restart. Win11 in the pd18 virtual machine does not have a virtual network card and needs to be restarted. First, add R in Windows to bring up the run window, enter servicesmsc, right-click, change the startup type to automatic, and restart.
4. The virtual machine is used by software to simulate the system and the wireless network card cannot be found. It may be that the network card driver being used by the computer does not match the virtual machine. It is recommended to upgrade the driver and try again.
5. The virtual machine shows that there is no network card. Just change the nat mode and go directly to the real machine signal.
6. First disable the wireless network card of the real machine; (wireless network cards generally cannot be used in both real machines and virtual machines at the same time).
Conclusion: The above is a summary of the answers that this site has compiled for you about the problem of not being able to find the network card driver when installing a virtual machine on a Mac. I hope it will be helpful to you! If your problem is solved, please share it with more friends who care about this problem~
The above is the detailed content of Can't find the network card driver when installing a virtual machine on Mac?. For more information, please follow other related articles on the PHP Chinese website!
There is no WLAN option in win11
Open home folder on mac
How to skip online activation in win11
Win11 skips the tutorial to log in to Microsoft account
How to open win11 control panel
Introduction to win11 screenshot shortcut keys
Windows 11 my computer transfer to the desktop tutorial
Solution to the problem of downloading software and installing it in win11
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
