Gigabyte's board enters the bios as soon as it is turned on. How do I enter the system?

php editor Banana is here to share with you how to enter the system on a Gigabyte motherboard. When we turn on the computer, we sometimes find that the computer directly enters the BIOS interface and cannot enter the operating system. This is because the default setting is to boot from the hard disk, and we need to modify the settings to allow the computer to enter the system normally. Next, I will briefly introduce the method of entering the system.

The Gigabyte board enters the bios as soon as it is turned on. How do I enter the system?

In this case, it is because uefi is turned on. If you want to return to the original startup mode

1. Open csm in the bios and open legacy in the startup mode (my motherboard is not Gigabyte, but it is basic The options are the same)

2. Enter pe, change the partition format to mbr, and then install it in the previous way

How to enter the bios settings on a Gigabyte motherboard?

The method of entering bios settings for Gigabyte motherboards is slightly different depending on the motherboard model. There are usually three methods:

1. Boot Menu key

During the boot process , press the F12 or Delete key, the Boot Menu menu will appear, select the BIOS Setup option to enter.

2. Shortcut keys

During the boot process, press the Ctrl Alt Delete key or the Ctrl Alt Enter key to enter the BIOS settings.

3. Gigabyte EasyTune

If your computer has the Gigabyte EasyTune software installed, you can enter the BIOS settings through the software. In the software interface, click the BIOS button and then select the Enter BIOS option to enter.

It should be noted that the methods for entering BIOS settings on different Gigabyte motherboards may not be exactly the same. You can refer to the motherboard manual or the official website to find the specific method. At the same time, you need to back up important data before entering BIOS settings to avoid data loss due to improper settings.

How to enter BIOS on Gigabyte motherboard?

1. When the Gigabyte logo interface pops up at the moment of booting, immediately press the "F12" key to enter the Gigabyte motherboard BIOS interface.

2. After entering the uefi bios interface , set the language display in the upper right corner to the "Simplified Chinese" item;

3. Then we use the left and right arrow keys to move to the "BIOS Function" button in the menu bar. We need to perform U under this option. The boot settings of the disk or CD;

4. Select the top item "Boot Priority #1", and then press the Enter key. A window will pop up, where you can see the name of the U disk. This one is based on TOSH. At the beginning, some U disks start with king;

5. If there is a CD-ROM drive on the computer, it will also be displayed here. If you want to boot from the CD-ROM, just select the name of the CD-ROM drive here. After selecting, press Enter key to confirm;

6. After pressing the Enter key, exit the small window, and the U disk has been selected as the first priority startup item;

7.Finally press The F10 shortcut key stores and leaves the uefi bios settings, and click the "Yes" button in the pop-up window.

How to enter the motherboard BIOS on a Gigabyte motherboard?

How to enter Gigabyte motherboard bios

　1. Start the computer.

　2. Press the delete key to enter the BIOS (Basic Input/Output System) setup interface.

　3. If you do not need to install the system, just enter the bios to set some other things. After completion, press the F12 key to exit. Then the computer will automatically enter the startup interface, and we will be able to use it normally after booting.

Why can’t I enter the bios of Gigabyte a520m-k motherboard?

If you cannot enter the BIOS setup interface of the Gigabyte A520M-K motherboard, you can try the following methods:

1. Restart the computer and press the Del key or F2 key of the motherboard. These are the common keys for entering BIOS setup, and when you press these keys, you should be able to enter the BIOS interface.

2. You can also try pressing the F12 key, which will open a boot menu that should include the option to enter the BIOS setup.

3. If the above method still fails to enter the BIOS setup interface, you can try to use the Clear CMOS jumper on the Gigabyte motherboard to reset the BIOS settings. You can refer to your motherboard's user manual to find the location and operating procedures for the Clear CMOS jumper.

4. If you still cannot enter the BIOS setup interface after trying the above methods, it may be because the motherboard has a hardware failure or compatibility issue. In this case, it is recommended that you contact GIGABYTE customer service support or seek help from professional technicians.

Please note that before making any changes, please make sure you have backed up important data and operate carefully to avoid unnecessary losses.

How to enter bios on Gigabyte motherboard?

Method/Step 1:

First find the DEL key on the keyboard.

Method/Step 2:

Then press the DEL key immediately when the LOGO is displayed after turning on the computer.

Method/Step 3:

Finally enter the BIOS and make relevant settings.

What are the detailed steps to flash bios for Gigabyte motherboard?

1. Download the matching BIOS file. You can see three files, among which the one with H81 is the correct BIOS program.

2. Turn on the computer and start F12 PE. Here we take Laomaotao as an example.

3. Enter the Max Dos toolbox and enter the latest version of the tool.

4. Select pure DOS mode to enter.

5. Enter the C drive, and then enter to display the files in the drive.

6. Enter the backup BIOS program.

7. Enter the batch file and refresh the BIOS directly.

8. Enter the refresh interface and automatically refresh. After the refresh is completed, the device will automatically restart several times, so there is no need to worry.

9. Remove the PE disk and enter BIOS/system normally.

The above is the detailed content of Gigabyte's board enters the bios as soon as it is turned on. How do I enter the system?. For more information, please follow other related articles on the PHP Chinese website!