ASUS motherboard cannot be turned on and is stuck on the logo interface?

php editor Xiaoxin Asus motherboard cannot be turned on and is stuck on the logo interface? This is a common problem that many computer users encounter when using Asus motherboards. When the computer is turned on, it cannot boot into the system normally, but stays on the ASUS logo interface, which makes people feel confused and anxious. This situation may be caused by a variety of reasons, such as hardware failure, BIOS setting issues, etc. In this article, we will introduce in detail the possible reasons why the ASUS motherboard cannot be turned on and is stuck on the logo interface, and provide effective solutions to help you quickly solve this problem. Don't worry, let's solve this trouble together!

#The ASUS motherboard cannot be turned on and is stuck on the logo interface?

Answer:

What to do if the ASUS motherboard cannot boot and is stuck on the logo interface:

1. Press F2 to enter the BIOS after booting, and select securebootmenu in the security tab. , securebootcontrol press Enter to select Disable, press F10 to save;

2. After the computer restarts, click F2 to enter the BIOS, select LaunchCSM in the boot tab, press Enter to select Enable, and press F10 to save;

3. Restart the computer and click esc to select the startup item and select the corresponding startup method.

How to enter the bios settings if the ASUS motherboard cannot be turned on after the memory is increased?

1. Open the case to discharge the BIOS. Now there is a special BIOS discharge jumper on the motherboard (near the button battery). Jump to the other side and then jump over again.

2. Remove the battery, short-circuit the positive and negative electrodes of the battery holder for a few seconds, then reinstall the battery, and it will generally start.

In addition, in order to avoid being unable to boot after overclocking failure, many motherboards now also provide such a function, that is, after overclocking failure, you can enter the BIOS reset by holding down the Del key when booting. If your motherboard supports it, you can press and hold the Del key during boot to enter the BIOS reset. Expansion: The actual significance of memory overclocking is not very great, and the improvement effect is not too high. It mainly depends on the overall performance of the platform, and memory overclocking is harmful to the memory. There are two types of memory overclocking. One is to adjust the main frequency and voltage of the memory to achieve the overclocking effect if supported by the motherboard BIOS. The other is that the motherboard and memory themselves cannot support high frequencies, and the SPD information of the memory needs to be modified. This is achieved by forcing the low frequency to work at high frequency.

Asus motherboard cannot boot when xmp is enabled?

mp mode itself is an automatic overclocking. After adjusting the voltage, it conflicts with the automatic overclocking (xmp mode) of the memory module, causing the computer to fail to boot. The solution is as follows:

1. At this time, you need to reset the motherboard bios and you need to cut off the power.

2. Disconnect the motherboard button battery, wait 10 minutes, and then quickly press the power button 5-6 times.

3. Wait another 20 minutes.

4. After completion, replace the button battery and power on.

Asus motherboard keeps entering bios when booting and cannot boot normally?

The steps are as follows

1

After entering the BIOS, press F9 to load the default configuration, and click Yes to confirm the loading (individual models can.

2

If you save and exit and then restart, or enter the BIOS directly, try to refresh the BIOS.

3

If it still doesn’t work, there is a hardware problem, please contact after-sales service for inspection and repair.

The above is the detailed content of ASUS motherboard cannot be turned on and is stuck on the logo interface?. For more information, please follow other related articles on the PHP Chinese website!