Home Computer Tutorials Computer Knowledge uefi cannot recognize USB hard drive

uefi cannot recognize USB hard drive

Feb 09, 2024 pm 12:00 PM
U disk win10 uefi bios settings Dell notebook win7 system

In recent years, with the rapid development of computer technology, UEFI (Unified Extensible Firmware Interface) has been widely used as a new firmware interface technology. However, sometimes we encounter a problem: UEFI cannot recognize the USB flash drive or hard drive. This problem has brought some trouble to our use. So, why does UEFI fail to recognize the USB flash drive or hard drive? How can we solve this problem? Next, let’s take a look at the relevant content compiled by php editor Xinyi.

uefi cannot recognize USB hard drive

It should be noted that under normal circumstances, computers with win7 installed are in Legacy MBR mode, while those with win8 and win10 pre-installed generally use UEFI GPT. mode, but if you want to convert win8 or win10 to win7 system, you need to modify the BIOS. When installing win764, you do not need to modify the hard disk mode. When installing win7 32-bit, you need to modify the hard disk mode to MBR. The editor of Quick Start will share it with you below. The settings for booting the USB flash drive in Legacy mode, but if your computer boots the USB flash drive in uefi mode, just disable Secure boot, and there is no need to modify anything else. If you don’t understand the question, please follow the quick start headline account and ask the editor.

Common setting options for disabling safe boot in Legacy mode:

If there are the following options, you need to modify them. If not, skip them. .

Restart the computer and press Del, F2, F1 and other keys to enter the BIOS. Different brands of computers have different methods of booting into the BIOS interface.

To disable secure boot, you need to set Secure Boot to Disabled. Some models may require a password to be set in the BIOS to perform this operation. You can find the "Set Supervisor Password" option to set the password (if you use a UEFI USB flash drive to boot, the USB flash drive will be recognized after disabling Secure Boot. If it is still not recognized, please follow the steps below to modify it).

2. Change CSM to Enable or Yes or ALWAYS to indicate compatibility

3. Set OS Mode Selection to CSM OS

4. Boot mode or UEFI mode or Boot List Change Option to Legacy, indicating the traditional startup method

5. Change OS Optimized Defaults to Disabled or Other OS, disable the default system priority settings

6. Set Fast BIOS Mode to Disabled# under the Advanced option

## Next, the quick start editor will take a common notebook as an example:

1. ASUS notebook does not recognize the U disk boot disk operation method

1. It does not stop when starting the computer Press F2 to enter the BIOS, press the → arrow key to go to "Security", select Secure Boot Control and press Enter, change it to Disabled;

uefi cannot recognize USB hard drive

2, then switch to "Boot", Select Launch CSM and press Enter, change to Enabled, press F10 to save and restart;

uefi cannot recognize USB hard drive

3. Insert the USB boot disk, restart and press Esc to recognize the USB boot disk. Select the U disk item and press Enter.

2. Solution to Lenovo notebook not recognizing the USB boot disk

1. Keep pressing F1 or F2 when starting the computer (some models need to hold down Fn at the same time) to enter the BIOS interface ;

2. Under Exit, select OS Optimized Defaults and press Enter, change it to Disabled or Others;

3. Then select Load Optimal Defaults and press Enter to load the settings;

uefi cannot recognize USB hard drive

4. Go to Startup or Boot, change CSM to Enabled, change Boot Mode to Legacy, and finally press F10 to save the changes and restart;

uefi cannot recognize USB hard drive

5. Insert the U disk and restart, press F12 or Fn F12 to bring up the boot menu, select USB HDD and press Enter to enter.

3. ASUS UEFI graphical interface motherboard does not recognize the USB boot disk solution

1. Restart and press F2 to enter the BIOS, click the "Advanced Mode" button in the upper right corner, and switch to the "Boot" option card, select OS Type and press Enter, select Other OS and press Enter;

uefi cannot recognize USB hard drive

2. Then change the Secure Boot state to Disabled. If it cannot be modified, go to main and select the bottom "Security" means Security, press Enter to enter;

uefi cannot recognize USB hard drive

3. Select Administrator Password, which is the administrator password, press Enter, and set the password. If it still cannot be changed, explain this This model may have disabled the ability to turn off uefi and no longer allows users to modify it.

uefi cannot recognize USB hard drive

4. Dell notebook does not recognize the U disk boot disk solution

1. Press F2 to enter the BIOS settings when booting, and press the → arrow key to switch to the Boot page ;

2. Select Secure Boot and press Enter to change it to Disabled, then change the Boot List Option from UEFI to Legacy, press F10 to save and restart;

3. Insert the U disk to restart and press F12. U disk boot disk option can be recognized.

5. Solution to HP notebook not recognizing the USB boot disk after shutting down

1. Restart the notebook and press F10 to enter the BIOS. If there is no response, press ESC during startup. In the following interface, press F10 again Enter the BIOS interface;

2. Under System Configuration, select Boot Options and press Enter to enter the settings;

3. Set Secure Boot to Disabled, then set Legacy Support to Enabled, press F10 to select Yes and press Enter. Save changes;

4. Insert the USB flash drive to restart and press F9 or press ESC first, then press F9 according to the prompts to select the USB flash drive option in the boot menu and press Enter.

The above is the detailed content of uefi cannot recognize USB hard drive. For more information, please follow other related articles on the PHP Chinese website!

Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Article

R.E.P.O. Energy Crystals Explained and What They Do (Yellow Crystal)
2 weeks ago By 尊渡假赌尊渡假赌尊渡假赌
Repo: How To Revive Teammates
1 months ago By 尊渡假赌尊渡假赌尊渡假赌
Hello Kitty Island Adventure: How To Get Giant Seeds
4 weeks ago By 尊渡假赌尊渡假赌尊渡假赌

Hot Tools

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

SublimeText3 Chinese version

SublimeText3 Chinese version

Chinese version, very easy to use

Zend Studio 13.0.1

Zend Studio 13.0.1

Powerful PHP integrated development environment

Dreamweaver CS6

Dreamweaver CS6

Visual web development tools

SublimeText3 Mac version

SublimeText3 Mac version

God-level code editing software (SublimeText3)

Ventoy secure boot settingsSecure Boot Ventoy secure boot settingsSecure Boot Jun 18, 2024 pm 09:00 PM

Ventoy is a USB boot tool that can directly boot ISO/WIM/IMG/VHD(x)/EFI and other types of files in the USB flash drive. It is very easy to use. Laptops have secure boot turned on by default. If they are not turned off or cannot be turned off, they cannot be booted from a USB device. Ventoy also supports secure boot. The principle is to inject a GRUB installation certificate into the current computer. As long as your computer After being injected once, any USB disk PE booted based on grub can pass. The official description of Ventoy is a GIF image. The playback speed is too fast and you may not be able to remember it. The editor has divided the GIF image to make it easier to understand. Ventoy secure boot has EnrollKey and Enro

System Restore prompts that you must enable system protection on this drive System Restore prompts that you must enable system protection on this drive Jun 19, 2024 pm 12:23 PM

The computer has a restore point, and when the system is restored, it prompts "You must enable system protection on this drive." This usually means that the system protection function is not turned on. System protection is a feature provided by the Windows operating system that can create system restore points to back up system files and settings. That way, if something goes wrong, you can revert to a previous state. When the system fails and you cannot enter the desktop to start it, you can only try the following method: Troubleshooting-Advanced Options-Command Prompt Command 1 netstartvssrstrui.exe/offline:C:\windows=active Command 2 cd%windir%\system32 \configrenSYSTEMsy

What should I do if win10 does not switch users? Win10 login interface does not have the option to switch users. Solution What should I do if win10 does not switch users? Win10 login interface does not have the option to switch users. Solution Jun 25, 2024 pm 05:21 PM

A problem that Windows 10 users may encounter is that they cannot find the switch user option on the login interface. So what should I do if there is no switch user option on the win10 login interface? Let this site give users a detailed explanation of the problem of not switching user options in the win10 login interface. Detailed solution to the problem of switching user options on the Win10 login interface: Check user account settings: First, make sure you have multiple user accounts on your computer and that these accounts are enabled. You can check and enable the account by following these steps: a. Press Win+I keys to open Settings and select "Accounts". b. Select "Family & Others" or &ld in the left navigation bar

How to permanently turn off real-time protection in win10? How to disable real-time protection function in win10 computer 0 How to permanently turn off real-time protection in win10? How to disable real-time protection function in win10 computer 0 Jun 05, 2024 pm 09:46 PM

Although the comprehensive anti-virus software that comes with Windows 10 system can continuously protect the security of your personal computer, sometimes it may also affect certain downloaded files. For some users, it may be more appropriate to temporarily turn off the real-time protection function. But many users don’t know how to permanently turn off the real-time protection feature on win10 system. 1. First, press the "Win+R" keys to open the run window, enter the "gpedit.msc" command to open the local Group Policy Editor interface; 2. Then, in the opened interface, click "Computer Configuration/Administrative Templates/ Windows Components/MicrosoftDef

How to restore the default wallpaper in win10? One trick to quickly restore the default wallpaper in Windows 10 system How to restore the default wallpaper in win10? One trick to quickly restore the default wallpaper in Windows 10 system Jun 02, 2024 pm 02:07 PM

In Windows 10 system, if you want to return to the system default wallpaper, you can follow the following steps: 1. Right-click a blank space on the desktop and select Personalize in the pop-up menu. 2. This will open the Personalization window in Settings. In the left menu, click Background. 3. Under the "Background" settings, find and click the drop-down menu next to "Choosepicture", and then select Windows Default (Windows Default) or directly select a picture that looks like the default wallpaper in the picture preview below ( if there are multiple options). 4. If your system has multiple versions

What should I do if Win10 takes a screenshot and crashes? How to solve the problem of Win10 flashing and then disappearing after taking a screenshot? What should I do if Win10 takes a screenshot and crashes? How to solve the problem of Win10 flashing and then disappearing after taking a screenshot? Jun 02, 2024 pm 12:48 PM

There are many reasons why the screenshot disappears after taking a screenshot in Win10. Users can first check the screenshot save location or adjust the screenshot settings, or check the animation effect to check it. If it really doesn't work, you can also choose to update the driver and operating system to perform the operation. Let this website carefully introduce to users the analysis of the problem of Win10 disappearing after taking a screenshot. Analysis of the problem after win10 takes a picture and it flashes and disappears 1. Check where the screenshot is saved: When you use the Win+PrtSc (PrintScreen) key combination to take a screenshot, the screenshot is usually saved in the C:\Users\YourUsername\Pictures\Screenshots folder. please

Windows cannot start the Windows Audio service Error 0x80070005 Windows cannot start the Windows Audio service Error 0x80070005 Jun 19, 2024 pm 01:08 PM

The guy's computer appears: Windows cannot start the WindowsAudio service (located on the local computer). Error 0x8007005: Access denied. This situation is usually caused by user permissions. You can try the following methods to fix it. Method 1: Modify the registry to add permissions through batch processing, create a new text document on the desktop, save it as .bat, and right-click the administrator to go far. Echo==========================EchoProcessingRegistryPermission.Pleasewait...Echo================== ========subinacl/subkey

What to do if the Win10 Task Manager crashes? How to fix the Win10 Task Manager crash? What to do if the Win10 Task Manager crashes? How to fix the Win10 Task Manager crash? Jun 25, 2024 pm 04:31 PM

Hello everyone, have you ever encountered the situation where the Windows 10 Task Manager keeps crashing? This function helps us a lot, allowing us to quickly see all running tasks, which is very convenient to use, right? However, some friends said that they encountered this problem and didn’t know how to solve it, so let me share with you the specific solution! Solution to Win10 Task Manager crash 1. First, press and hold the "Win" + "R" keys on the keyboard to open Run, enter "regedit" and press the Enter key. 2. Expand the folders and find "HKEY_CURRENT_USERSoftwareMicros

See all articles