Toshiba laptop system changes USB boot

php editor Xinyi introduces to you the method of changing the U disk boot in Toshiba notebook system. In some cases, we may need to start the laptop through a USB flash drive, such as system crash, system reinstallation, etc. The U disk boot setting of Toshiba notebooks is relatively simple. Just follow the steps below: First, insert the prepared U disk into the USB interface of the laptop; then, turn on the computer and quickly press the F12 or ESC key to enter the boot menu; then, select the U disk as the boot device and press Press the Enter key to confirm; finally, follow the prompts to complete the USB boot settings. Through this simple method, we can easily change the startup mode of Toshiba notebooks, which facilitates system maintenance and repair.

1. Download Xiaobai’s one-click system reinstallation tool

2. Toshiba laptop that can access the Internet normally

2. Notes

1. Before installation, please ensure that there are at least two computer drive letters and the disk space outside the system is at least 8g.

2. Please ensure that the system C disk data has been backed up

3. Please turn off the computer anti-virus software before operation

3. Detailed installation steps (taking win10 system as an example)

1. Download Xiaobai's one-click reinstallation system, double-click to enter the local environment detection and open it. Picture below:

#2. The current novice system is very simple, and the selected system appears directly. It is generally recommended to install a recommended system, click to expand, and then click Install this system.

three. Then check the software to be installed and click Next, as shown in the image below:

Four. Downloading system images, system software and related drivers The following operations are automatic. Instead of operating the computer, you can do other things first.

Note: During the download and installation process, do not operate the computer, sleep or shut it down, otherwise the installation will fail. Fully automatic installation.

5. If you are close to the computer, you can manually click it to restart immediately, otherwise the computer will automatically restart after 10 seconds, as shown in the picture below:

6. After the computer restarts, the Power On option will appear. Automatically selected after 10 seconds. You can ignore it or select pe msdn and press enter to confirm. Pictured below:

7. After waiting for a few minutes, it will load and automatically enter the PE system. The Xiaobai installation tool will start automatic system installation.

8. After installation, the computer will automatically restart after 10 seconds, or manually click to restart immediately, as shown in the figure below:

9. During the installation process, the computer will automatically restart multiple times. Please don't worry, please wait for the installation to complete and enter the system. As shown below:

10. Congratulations on completing the system installation and you can use the system. Thank you for using Xiaobai system.

So, what if the computer does not boot into the system?

Solution: Use the small white system to create a U disk boot tool, and then reinstall the system. See link below.

The above is the detailed content of Toshiba laptop system changes USB boot. For more information, please follow other related articles on the PHP Chinese website!