


What should I do if the USB flash drive does not show up on my computer?
php editor Apple teaches you how to solve the problem that the U disk cannot be displayed. When we find that the computer cannot display it after inserting the USB flash drive, it may be due to a variety of reasons. First, we can try to re-insert and unplug the USB flash drive to check whether the USB flash drive is properly inserted and in good contact. If the problem persists, we can try to check the status of the USB flash drive in the Device Manager. The driver may need to be updated or reinstalled. In addition, it is also possible that the USB flash drive itself is faulty. At this time, we can try to insert it on another computer to see if it can be recognized normally. If none of the above methods work, you may want to consider using a professional data recovery tool to resolve the issue. In short, don't worry, try the above methods, I believe the problem will be solved soon!
For example, when I inserted the USB flash drive into my computer, I found that it had no response. I tried to open the disk but could not find the drive letter of the USB flash drive. In addition, sometimes when I insert the USB flash drive, the computer displays a message that the driver cannot be recognized or the driver has not been successfully installed.
At this time, do you also think that your USB flash drive is broken? Has it started to crash?

Don’t panic, you can try the following methods first!
1. The U disk may be hidden
First change the computer to see if the U disk is damaged. , if not, the USB flash drive may be hidden on your computer.
The solution is very simple:
Insert the USB flash drive and open "My Computer"/"This Computer" -View- option.

After entering the advanced settings box, still click View first, uncheck the "Hide empty drives" item, and then Click Apply.






After the property window pops up, click [Driver]-[Uninstall]-[OK]. After the uninstallation is complete, pull out the U disk and reinsert it into the computer. The computer will automatically load the USB driver, and then check your U disk. Whether it is read.

Method 2. Restart the USB device
Double-click to open After [USB Mass Storage Device], if you find that [Driver] is disabled, click [Enable] to restart the USB device. After success, check whether your USB flash drive is read.

Method 3. Update the driver
If found If the driver has been started, it is possible that the driver has not been updated. After clicking [Update Driver] in [Driver], check whether the USB flash drive can be read.



The above is the detailed content of What should I do if the USB flash drive does not show up on my computer?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

Razer mouse drivers not recognized can be resolved by following these steps: check hardware connections, update drivers, reinstall drivers, check Windows settings, check for third-party software conflicts, run System File Checker (SFC) and reset Razer Snake Synapse. If the problem persists, the mouse hardware may be faulty, please contact Razer Support.

Ventoy is a USB boot tool that can directly boot ISO/WIM/IMG/VHD(x)/EFI and other types of files in the USB flash drive. It is very easy to use. Laptops have secure boot turned on by default. If they are not turned off or cannot be turned off, they cannot be booted from a USB device. Ventoy also supports secure boot. The principle is to inject a GRUB installation certificate into the current computer. As long as your computer After being injected once, any USB disk PE booted based on grub can pass. The official description of Ventoy is a GIF image. The playback speed is too fast and you may not be able to remember it. The editor has divided the GIF image to make it easier to understand. Ventoy secure boot has EnrollKey and Enro

To resolve the Ethernet without valid IP configuration issue, follow these steps: Check the physical connection and replace the cable. Check your network settings to make sure the IP address is obtained dynamically. Reset the Ethernet adapter. Refresh the DHCP lease. Update network drivers. If the problem persists, contact your ISP.

Are all motherboards suitable for installing any independent graphics card? 90% of graphics cards and motherboards are compatible. The most important thing is the power supply. The more high-end graphics cards, the better the power supply specifications are. For example, use a 2060 graphics card. If the power supply is equipped with a 200W power supply, it will not match. It will be more comfortable to configure at least a 600W power supply. This configuration is a 4-core processor. The CPU is not very low, but the graphics card is only equipped with 9500GT. This is obviously an unreasonable combination of graphics cards. As long as you upgrade the graphics card, the performance of your computer will be greatly improved. In the case of corresponding interfaces, all motherboards are equipped with any independent graphics card, no. Can my graphics card be installed on the motherboard after I buy it? 1. Yes, the installation method is as follows: We must first determine whether the independent graphics card we purchased is compatible with our own.

What is the installation path of the graphics card driver? 1. Turn on the computer, click Computer, and open the Device Manager. For all devices on our computer, find the installation directory location of the graphics card driver. Click on the display adapter, find the device to which the driver belongs, and click to select properties. After entering properties, select Update Driver. 2. The graphics card driver is best installed on the C drive. By default, some drives are installed on the system disk. Cannot make selection. If you want to choose, you can install it on other disks. It is better to divide the hard disk into multiple areas than one area. The access speed through the C drive is faster than the D drive, and the access speed through the D drive is faster than the E drive. 3. It cannot be changed otherwise problems will occur. The driver is installed in C:\ProgramFiles, and C:\WINDOW

Solution: To resolve the Werfault.exe application error on Windows 11, you can try: Restart your computer Check for application updates Run System File Checker (SFC) Run Windows Memory Diagnostic Scan for malware Update drivers Contact the software vendor Reinstall if necessary Set up Windows 11

1. First, we click the search button in the taskbar below, search and enter [Device Manager]. 2. Then find our Bluetooth device in the device manager, right-click to select it, and click [Update Driver]. 3. If the Bluetooth device cannot be found in the device manager, then we can download Master Lu and update the driver in it. Method 2: 1. First, we enter [Settings] through the start menu. 2. Find the [devices] device in the setting interface. 3. Then click the [Bluetooth] option, and then set the switch below to [On].

The Internet has become an indispensable part of people's lives in today's information age. But we can't get online, and sometimes we encounter some troubles. However, for example, the broadband is already connected. And take corresponding solution measures, we need to troubleshoot the problem step by step to restore the network connection in this case. Confirm the device connection status: Whether the mobile phone and other devices have been correctly connected to the broadband network, check the computer to ensure that the wireless network or wired network connection is normal. 2. Restart the broadband device: Reset the device and re-establish the connection, wait a few minutes and then turn it back on again. Try turning off the broadband router or modem. 3. Check the broadband account number and password: To avoid being unable to access the Internet due to incorrect account or password, make sure the broadband account number and password entered are correct. 4. Check D
