What to do if win10ping prompts transmission failure and common faults

php editor Yuzai will introduce you to some methods to solve common problems when win10ping prompts transmission failure. When using the ping command for network testing, transmission failures sometimes occur, which may be due to network connection problems, firewall settings, or target host failures. For different reasons of failure, we can take different solutions to ensure that the ping command works properly. Below, we will introduce some common faults and solutions in detail to help you solve the problem of win10ping command transmission failure.

1. It may be that the network of the current device is out of order. Check whether it can connect to the Internet. For example, if IPV6 does not have Internet access rights, but you can ping the IPV6 address, this problem may occur.

2. It is possible that when we ping the IPV6 website, the "Teredo" service is not enabled. We enable it through the command prompt.

3. After opening the command prompt with administrator rights, enter "netsh interface Teredo set state disable" and press Enter to execute the command.

3. Then enter the command "netsh int ter set state enterpriseclient" and press Enter to execute.

4. Then enter the "netsh int Teredo show state" command to check the service status.

5. When the displayed service status is not "Disabled", it is enabled.

6. Then you can try the ping command to see if the problem is solved.

The above is the detailed content of What to do if win10ping prompts transmission failure and common faults. For more information, please follow other related articles on the PHP Chinese website!