What to do if there is a paper jam in the HP 5200 printer. Learn in seconds: How to solve the paper jam in the HP 5200 printer.

php editor Banana brings you a guide to solving the paper jam problem of HP 5200 printer. When we use the HP 5200 printer, we sometimes encounter paper jams. This not only wastes time but also affects work progress. But, don't worry! We will introduce you some simple and effective solutions to solve the paper jam problem of HP 5200 printer in seconds. Let’s solve this trouble together!

A customer's 5200 machine will continue to feed paper when printing, which will lead to paper jams. Regarding this failure, the first thing to consider is that there is a problem with the paper feed clutch of the machine. Here I would like to share with you the disassembly process and maintenance methods of this machine. First remove the rear cover and pull it out directly as shown in the picture.

Open the back cover and remove the two screws as shown in the picture. Then the back cover can be removed directly.

Then remove the right baffle, pull it directly to the right as shown in the picture, and it can be pulled off directly.

Then remove the upper cover. You need to remove 4 screws. The picture shows the two screws at the back

There are two screws on the front.

#You need to pay attention when removing it. There is a plug for the LCD panel below, just unplug it.

You need to remove the switch panel on the lower right side. In addition to the screw at the back, there are also two places under the machine that you need to pay attention to. Just pry and remove. .

Here is an iron baffle, which can be removed directly in the direction shown.

Then take off the motherboard, remove these screws, and then pull it to the right to remove it.

The paper feed clutch is behind the baffle below. Remove these screws and take it off.

You can see the clutch immediately. At this time, you need to take out the wire from the coil plate, and then remove the screws on the coil plate. The board does not need to be removed, as long as the clutch can be taken out.

As shown in the picture, you can see the clutch. Remove the wire and take out the clutch.

This is the clutch after it is completed. When the clutch is taken out, it can be clearly seen that the pressure plate cannot be easily returned to its position, and the glue underneath has aged. , causing them to stick together. At this time, just use a blade to scrape off the aged glue and find some double-sided tape or other things to ensure the smooth opening and closing of the pressure plate. Then follow the reverse steps to install the machine. As a reminder, there is only one plug in the whole process. Don't forget to plug it in when installing the cover, otherwise the machine panel will not display and the indicator light will not light up. Thanks for browsing, I hope it helps everyone.

The above is the detailed content of What to do if there is a paper jam in the HP 5200 printer. Learn in seconds: How to solve the paper jam in the HP 5200 printer.. For more information, please follow other related articles on the PHP Chinese website!