What should I do if the Win10 LAN fails to ping? Solution to the problem of Ping failure in LAN in Win10

Win10 LAN Ping failure is a common problem encountered by many users. Sometimes it may cause unstable network connection or inability to access shared resources. Regarding this problem, PHP editor Yuzai has summarized some solutions for everyone. Through the following simple steps, you can try to fix the problem of Win10 unable to ping within the LAN to ensure that the network connection is unobstructed.

Solution to the problem of Ping failure in Win10 within the LAN

1. IP address setting conflict

When devices connected to the network are connected to the Internet, they all have a fixed IP address. If If the IP addresses of two devices are the same, an IP conflict will occur, resulting in the inability to access the Internet.

2. Reasons for network cables

Depending on the situation of the network cable connected to the device, the network cable production will be different. Network cable production is usually divided into two types: 568b and 568a. When connecting to a router, 568b is usually used. When connecting to a switch, one end is 568a and the other is 568b, depending on the type of device.

3. Equipment failure or incorrect settings are easy to understand. It is best to be done by professionals in this regard

In short, ping is a A very practical command, but it can only detect network speed, and it has no solution for hardware failures. If you encounter ping failure within the LAN, you can troubleshoot according to the above situation, and generally you can find out the problem.

How to deal with it?

Most of the reasons why the LAN cannot ping are related to the firewall.

PS: Since it has something to do with the firewall, I first turned off the Windows 10 domain network, private network, and public network firewall. The result was that I could ping the LAN. Although this can be solved, it is not a problem. Understand the solution.

1. First, turn off the anti-virus software on the computer and try to ping again. If it is determined that the computer is in the same LAN and still cannot communicate, then it is a problem with the system firewall. Turn on the computer, click the win icon in the lower left corner, in the menu that opens, select the settings option, and click to enter.

#2. On the settings page that opens, enter firewall in the search box above, and click the Firewall and Network Protection option below.

#3. As shown in the figure, you can see that the firewall list is all enabled.

#4. If we are not sure about the network we are using, select Close All. The editor here uses the public network, click on it.

#5. As shown in the picture, on the page that opens, just turn off the switch under the firewall.

#6. As shown in the picture, the display is turned off. If you are not sure, turn off all three settings to solve the problem.

The above is the detailed content of What should I do if the Win10 LAN fails to ping? Solution to the problem of Ping failure in LAN in Win10. For more information, please follow other related articles on the PHP Chinese website!