Solution not supported by uefi firmware?

Solution not supported by uefi firmware?

The solution does not support the uefi function.

Windows10, the disk layout of this computer is not supported by UEFI firmware, let’s take a look at the solution. Failure cause analysis:

Generally speaking, if you enable UEFI mode in the motherboard BIOS, and if your hard disk partition table format is not GPT, but MBR format, then you will be prompted that Windows 10 system cannot be installed.

Requires UEFI GPT or Legacy MBR to install Windows 10 system normally.

What should I do if my computer does not support uefi?

Only the motherboard has been upgraded. If the software cannot be upgraded and used, then the only option is to replace it.

The motherboard cannot recognize the USB disk uefi?

1. Turn on the computer and press the shortcut key to enter bios and find the security option.

2. Move to the option directory, select secure boot control and set it to disabled.

3. Then move the cursor to the uefi bios menu option boot menu and select the Launch CSM option.

4. Set to enabled.

5. Finally, press f10 to save. In the pop-up save & exit setup window, select yes and press Enter.

How to set up the motherboard only with uefi?

If your motherboard only supports UEFI (Unified Firmware Interface) and does not have a traditional BIOS interface, you can follow the following steps to set it up:

1. Boot to the UEFI setup interface: Reboot computer and press Del, F2, F10, or other designated hotkeys when booting. This specific hotkey may vary between motherboard manufacturers and models, please consult your motherboard manual for the correct hotkey.

2. Navigate to the appropriate option: Once you enter the UEFI setup interface, you will see a graphical interface listing various setup options. Use the arrow keys on your keyboard (up, down, left, right) to navigate to the specific option you want to change.

3. Set the time and date: Look for the "Time and Date" option in the settings interface, and then make sure the correct time and date are set.

4. Boot sequence settings: Find the "Boot" option in the settings interface. Here you can choose which device should be the preferred boot device, such as a hard drive, optical drive, or USB device. After selecting the appropriate boot device, make sure to set it as the default option.

5. Security settings: The UEFI settings interface usually provides security-related options. These options include enabling or disabling Secure Boot, Fast Startup, and other security features. Make appropriate adjustments as needed.

6. Other settings: The UEFI settings interface also provides many other options, such as system configuration, power management, device settings, etc. Adjust accordingly based on personal needs and preferences.

7. Save and exit: After completing the required settings, make sure to save the changes and exit the UEFI setup interface. Follow the on-screen instructions to save the changes and restart your computer.

Please note that the specific option names and setting paths may vary depending on motherboard manufacturers and models. Before setting up, please refer to your motherboard manual for precise steps and information.

What should I do if the motherboard does not support uefi?

If the motherboard does not support UEFI (Unified Extensible Firmware Interface), you can consider the following solutions: Upgrade the motherboard BIOS: Check the official website of the motherboard manufacturer to see if there is an available BIOS update for the new version. The BIOS may support UEFI. Please note that there are certain risks in upgrading the BIOS. Improper operation may cause the motherboard to malfunction. It is recommended that you carefully read the guidelines provided by the motherboard manufacturer before upgrading. Use Legacy BIOS to boot UEFI installation: If the motherboard does not support UEFI, but you want to use UEFI to install the operating system, you can consider using Legacy BIOS and UEFI hybrid mode to boot. This allows you to use UEFI to install the operating system without changing the Legacy BIOS settings. For specific operation methods, please refer to the guide or online tutorial provided by the motherboard manufacturer. Use traditional BIOS settings: If the motherboard does not support UEFI, you can also choose to use traditional BIOS settings to boot and install the operating system. The traditional BIOS setting interface is different from UEFI, and some settings need to be manually made, such as startup sequence, hard disk mode, etc. No matter which solution you choose, it is recommended to back up important data before operation and ensure a certain understanding of computer hardware to avoid unnecessary losses.

Can't enter the system after changing to a motherboard that doesn't support uefi?

Solution to the problem that uefi cannot enter the system after reinstalling the computer

1. First restart the computer, press the Del key to enter the BIOS interface when booting, and select the "Security" option. (Different computer motherboards have different startup shortcut keys. Generally, there are more del, esc, and f2 types. You can check it by yourself according to your own motherboard)

　2. Then select "Secure Boot Control" and hit Enter. That’s it.

　3. Then select Disabled and press the Enter key, then switch to the "Boot" interface, select "Launch CSM" and press the Enter key.

　4. Under normal circumstances, the default is disabled. We press Enter and then set disable to enable.

5. Finally, press the F10 key to save the settings, click yes and exit.

　6. Restart the computer and enter the bios interface. You will see the startup options. Select the UEFI option to boot to enter the system.

The above is the detailed content of Solution not supported by uefi firmware?. For more information, please follow other related articles on the PHP Chinese website!