How to enter the pe system installation on dell computer

php editor Strawberry will explain how to enter the PE system installation. The PE system is an independently running pre-installation environment through which the computer system can be installed, repaired, backed up and restored. There are many ways to enter the PE system installation, the most common of which is booting through a USB flash drive or CD. First, you need to prepare a bootable USB flash drive or CD, and then write the PE system image file to the USB flash drive or CD. Next, insert the U disk or CD into the computer, restart the computer and enter the BIOS settings, and adjust the boot order to give priority to the U disk or CD. After saving the settings, restart the computer. The system will automatically enter the PE system, and then follow the interface prompts to install the system.

The key to the problem is the lack of hard disk drive. Although the BIOS can recognize the hard drive normally, the operating system cannot communicate with the hard drive correctly. The solution is to install the Intel Rapid Storage Technology Driver so that the operating system can correctly recognize and use the hard drive.

We click to load the driver:

Find the driver we prepared in advance and select the correct driver.

Then select New Reinstall.

But where to download the driver? We need to go to the Dell technical support website https://www.dell.com/support/home/zh-cn, enter your service number, find the driver download

and find the Intel Rapid Storage Technology driver (Intel Rapid Storage Technology Driver) Click to download!

After the download is complete, right-click and run as administrator:

After unzipping, copy the entire folder to the installation disk. When encountering a drive that is not recognized, choose to load the driver. The driver path is U disk->Drive folder->F6->VMD->f6vmdflpy-x64.

Two drivers will appear after that, as shown below:

Select the first Intel RST VMD Controller 9A0B (TGL), click Next, and you can see it after the loading is complete. Once you get to the hard drive, just choose New Installation.

The above is the detailed content of How to enter the pe system installation on dell computer. For more information, please follow other related articles on the PHP Chinese website!