php editor Baicao introduces you to a quick and convenient method of reinstalling the system - using a USB flash drive to reinstall the system. When our MSI computers experience system crashes, virus infections, or other problems, reinstalling the system through a USB flash drive is a common solution. Not only can it quickly restore the normal operation of the computer, but it can also remove junk files and improve system performance. This article will introduce in detail how to make a USB boot disk and how to use the USB disk to reinstall the system to help you solve computer problems easily.
First, let’s analyze the hardware equipment we will use today!
MSI’s MPG series, also known as the previous GAMING series, has gradually upgraded its gaming motherboards, with MPG being in the middle range. For example, the mortar MORTAR belongs to the lower-grade MAG series, while the B550 UNIFY-X Dark Edition is more advanced and belongs to the MEG series.
Although it is in the MPG camp, the accessories are not stingy at all. In addition to the traditional SATA cable, RGB synchronization cable, color nameplate stickers, instructions, and warranty cards, MSI also replaced the driver CD with a driver The U disk can be erased and written by itself. Although it is not worth a lot of money, it is very convenient. MSI also provides two small screwdrivers similar to keys and a small brush to facilitate the removal and cleaning of the motherboard. Personalized WIFI gain Antenna and Dragon Shield chassis stickers are also a must.
The unique "carbon fiber" appearance of the CARBON series integrates racing technology into the motherboard design. The new generation of heat dissipation shield adopts a small square design similar to a musical scale, which adds a three-dimensional effect, and the overall style is in line with the "cyberpunk" aesthetic tendency of the majority of gamers.
DEBUG light, front Type-c port on the chassis, RGB sync port, and even Corsair’s C-LINK port, no problem.
Z590 GAMING CARBON's 2.5G network card has been changed from the previous crab network card to Intel's I225-V, and the built-in WIFI has also been upgraded to Intel's new generation AX210, which is a WIFI6 network card, and is no longer Use AX200 which is commonly seen on Taobao. For ordinary players, these changes may not be particularly important, but from a quality and performance perspective, this is a more conscientious upgrade.
As a large ATX board, there is no need to worry about scalability. First of all, it has 3 M.2 NVMe solid-state slots, and each slot is equipped with a heat dissipation vest, which is in line with the positioning of the board. Generally speaking, only the first slot of low-end boards is equipped with a cooling vest. However, if the back two M.2 slots are used, some SATA channels may be occupied. However, there are now fewer mechanical hard drives and SATA solid-state drives in the entire machine. Most players will only add a large-capacity mechanical hard drive as a storage warehouse, so this impact is not significant.
The memory adopts ADATA XPG-Longyao Heavy Armor D50 DDR4 3600 16GB (8G×2) RGB memory set. The appearance is designed as titanium gray armor with a staggered geometric light guide on the upper layer. strip. The light-emitting area is composed of staggered triangles and supports lighting synchronization of ASUS, MSI, and ASRock motherboards. Using specially selected modern D-DIE particles.
ADATA XPG series has launched many RGB memories in recent years, such as D80 and D60. The larger the naming number, the higher the positioning, and the smaller the number, the entry-level. The latest D50 has a redesigned appearance, similar to the Chicago Fantasy Halberd.
MSI launched its new version of MAG CORELIQUID C360 all-in-one water cooling radiator during this year’s hottest summer solstice season. The water cooling radiator of this product is 360mm in size, and both the fan and cold head are equipped with RGB lighting effects.
MSI launched its new version of MAG CORELIQUID C360 all-in-one water cooling radiator during this year’s hottest summer solstice season. The water cooling radiator of this product is 360mm in size, and both the fan and cold head are equipped with RGB lighting effects. The water-cooling head of C360 is equipped with a translucent shell, which also supports RGB lighting and has an iconic logo. The 12cm fan of the radiator has a speed range of 500-2000RPM, a single air volume of 78.73 CFM, a lifespan of 70,000 hours, and a maximum noise of only 34.3dBA.
MAG CORELIQUID C360 radiator’s built-in water pump rotates at 4200RPM and uses a 12V 3-pin interface for power supply. The product supports the new LGA 1700 buckle, and is also compatible with almost all buckles such as LGA 1156/1200/1366/2066 and AMD AM4/AM3 /FM2 /TR4/sTRX4.
To match the MAG CORELIQUID C360 radiator, we recommend two chassis, an MPG Velox 100R blade chassis and an MPG Quietude 100S dark chassis. This guy is a mid-tower chassis with a deeply optimized heat dissipation design. It can provide sufficient and effective airflow for system cooling through the built-in vents throughout the system. It is originally equipped with four ARGB lighting fans, and up to 7 fans can be installed. Effectively increase air exchange efficiency and improve heat dissipation efficiency. ARGB display space is fully supported using MSI Mystic Light.
Compared with the "Krypton Gold Gun" or SEKIRA series of its peers, the MSI MPG QUIETUDE 100s is so simple that it has a "business style" appearance and does not look like it comes from the same school. The front panel and top of MSI MPG QUIETUDE 100s support 360mm water cooling. Because the front panel is the air inlet, it is best to place the 360 water cooling on the top, so it will also become a source of noise. MSI MPG QUIETUDE 100s also uses a magnetic design, with a layer of sound-insulating cotton added in the middle, which can effectively reduce noise.
The power supply I chose is MSI MPG A550BN power supply. Its rated power is 550W. It has passed 80 PLUS bronze certification. It is an active FPC. The input voltage is 100-240Vac and the output voltage is 115Vac/8.0A. max, 230V ac/4.0A max, using DC-DC circuit design, single 12V, equipped with 120mm low-noise fan, which not only reduces noise, but also has good heat dissipation effect.
The USB flash drive used is the 16GB USB flash drive that comes with the MSI MPG Z590 GAMING CARBON WIFI motherboard.
Step 1: Use decompression software to decompress the system ISO image downloaded from the Microsoft official website into a separate folder. After completion, enter the folder, select all, and copy.
Step 2: Insert the U disk and format it. When formatting, the file system uses NTFS format. Select it and format it.
Step 3: Open the empty U disk partition and paste the file you just copied directly into the U disk, yes! Just paste the decompressed Win11 system image file directly into the root directory of the U disk! That's it? Yes! Yes! finished!
Then restart the system, click F11, select the USB disk to start and press Enter. You will see the familiar system installation interface in about a minute. After a few minutes, it will automatically restart once or twice. Finally, a perfect pure Win11 system is installed.
It’s really that simple! It is said that it has been possible to play this way since WIN10. I only discovered it now. If you guys have known about it for a long time, please don’t laugh at me! I have always been in love with UltraISO!
The above is the detailed content of msi computer usb disk reinstall system. For more information, please follow other related articles on the PHP Chinese website!