Insert the USB flash drive into the computer and open the card

php editor Xiaoxin is here to introduce a common problem: when we insert the USB flash drive into the computer, we find that the USB flash drive and display card cannot be opened. This is a frustrating situation, but luckily, there are some simple ways to fix it. In this article, we will provide you with some practical solutions to help you solve this trouble. Whether it is a USB flash drive hardware problem or a system setting problem, we will answer your questions one by one and restore your USB flash drive to normal use. let's start!

For the problem of computer crash caused by the connection of external devices such as USB flash drives, it is necessary to analyze the specific problem and find the cause to solve it.

Below, the editor will introduce you to several common causes of system restart or computer crash, and provide solutions.

Situation 1

Cause: When you insert the USB disk into the computer, if The operating system prompts "Device not recognized" text that causes the computer to restart or crash.

Solution: In this case, you can follow the computer feedback prompts, indicating that the computer is supplying power to the USB flash drive normally. We can try to get a new USB flash drive. Give it a try and see if the problem still occurs.

Situation 2

Cause: When a USB flash drive or other removable disk device is inserted into the computer, the computer cannot recognize it, causing the computer to crash.

Solution: Re-update the computer's USB driver and reset the BIOS to restore it to factory settings. It should be noted that restoring factory settings may return the hard disk to the pre-installed mode. If you cannot enter the system at this time, you can solve the problem by modifying the hard disk mode.

Situation 3

Cause: Insufficient power supply from the computer to the USB disk may also cause the system to restart. It may be that the system is set to energy-saving mode, causing intermittent system failure.

Solution:

1. First, move the mouse to the desktop computer Right-click on the icon, and then select "Device Manager" in the pop-up menu, as shown below:

##2. Then in the Device Manager window, click to expand "Universal Serial Bus Controller-USB Root Hub", right-click the mouse and select "Properties", as shown in the following figure:

3. Finally, in the pop-up property settings window, switch to the "Power Management" tab, and then select "Allow the computer to turn off this device to Uncheck the "Save Power" option, then click "OK" to save the changes.

As shown below:

##Hope the above The content can be helpful to everyone.

The above is the detailed content of Insert the USB flash drive into the computer and open the card. For more information, please follow other related articles on the PHP Chinese website!