Does a Gigabyte motherboard run automatically as soon as it is powered on?

php editor Zimo users reported that they recently encountered a problem when using Gigabyte motherboards: they run automatically as soon as they are powered on. Let’s answer this question. The reason why the Gigabyte motherboard automatically runs as soon as it is powered on may be due to a problem with the BIOS settings. You can try to enter the BIOS interface to adjust it. In addition, it may also be caused by improper hardware connection. You can check whether the connection between the motherboard and the power cord is firm. If none of the above methods work, it is recommended to contact GIGABYTE customer service for further help and solutions.

Does a Gigabyte motherboard run automatically as soon as it is powered on?

It is normal for the anchor to run automatically when power is turned on. Some motherboards support automatic power-on, so there is no need to make a fuss.

What should I do if my Gigabyte motherboard automatically powers off and restarts?

1. There may be incompatibilities between systems or programs. Press F8 after booting until the advanced options appear, then let go. Select "Last Known Good Configuration" and press Enter to fix it. If it still doesn't work, press F8 to enter security. Restore the system or reinstall the system.

2. Caused by excessive temperature of CPU or other hardware, incompatibility or failure of memory and graphics card.

3. The hard disk has bad sectors. Please use the system's built-in functions or software to repair the disk, or format the hard disk, repartition the system, and reinstall the system.

4. Power failure and voltage instability can also cause automatic restart.

5. Driver incompatibility can also cause restarting.

6. Mainboard component failure.

7. Change the system's default automatic restart: right-click My Computer/Properties/Advanced/Startup and Recovery Settings/uncheck "Automatic Restart" in System Failure, and then press OK and the application to restart your computer.

Gigabyte motherboard scheduled power-on is not working?

The reasons and solutions for Gigabyte motherboard's scheduled power-on failure are as follows

1.

Whether the time of the bios motherboard is set correctly (part of the motherboard time and win system time are not correct) Synchronized, be sure to check whether the motherboard time is correct)

2.

Whether the bios has enabled scheduled startup. DISxxx (meaning to close) ENxxx (meaning to open)

3.

If it is a desktop computer, check whether the computer has been powered off (unplug the computer power cord, or have a power outage). If the computer is powered off, The motherboard will cancel the scheduled boot task after 2 minutes (both when it is turned on and off). (The reason is very simple: the computer is out of power, and even if power is supplied to the computer before the timer, the motherboard will not start on time because the task has been cancelled).

4.

If it is a win10 system, you need to turn off the quick startup of win10. (Because the win10 quick startup principle conflicts with the motherboard's scheduled startup, it cannot be scheduled to start if quick startup is not turned off)

How does Gigabyte motherboard Shenguang Sync start automatically when it is turned on?

To make the GIGABYTE motherboard's ShenLight Sync automatically start at boot, you need to follow the following steps to set it up:

1. Enter the BIOS interface of the GIGABYTE motherboard. After booting, press the DEL or F2 key to enter the BIOS.

2. Find the "Peripherals" option in the BIOS interface. Some BIOS may name this option "Advanced" or "Integrated Peripherals", etc.

3. Find the "RGB Fusion" or "LED Visualizer" option in the "Peripherals" option. Different motherboards may have some differences here.

4. Turn on the "RGB Fusion" or "LED Visualizer" option and enable the "Startup option".

5. Save the settings and exit the BIOS interface.

After setting like this, Shenguang Sync will automatically start up. If you have any questions or improper operation causes system failure, you can try to solve it by clearing CMOS.

Gigabyte motherboard keeps restarting and won’t turn on?

1. Turn on the computer and keep pressing the DEL key, set the BIOS, restore the default settings, save and exit, select Load Optimized Defaults, and press F10 to save and exit.

2. The cause of the problem is that the memory module or the gold finger of the graphics card is oxidized or the slot contact is poor, causing the computer to fail to boot. Solution: You can cut off the power first, open the computer case, take out the memory stick, use an eraser to rub it back and forth against the gold finger part (that is, the place with the copper piece), and then replace it with a memory stick. Just plug it back into the slot. If you still can't turn it on after doing this, you need to check the graphics card. It means that it is a problem with the graphics card. Use the same method as above and it will be fine.

3. Press F8 while booting, enter Advanced, select Last Known Good Configuration, and confirm.

You can try the above three methods. If that doesn't work, reinstall the system.

What should I do if my Gigabyte motherboard reboots in a boot loop?

The Gigabyte motherboard boot loop and restart may be a BIOS problem. The solution is as follows.

Press and hold the power button for ten seconds when the phone is turned off, then release the button and press the power button to turn on the phone. It will undergo two short restarts. On the third time, the screen will be displayed and recovery will begin. As shown in the picture.

Then it will enter a state where the CMOS has no data, and the boot prompt will prompt you to set the BIOS, as shown in the figure.

Refresh the BIOS, as shown in the figure.

After flashing the BIOS, take out the battery, cut off the power, discharge it, and leave it alone. Test whether the BIOS is as prone to failure as the previously restored BIOS. If there is no problem, you can turn it on.

How to set the automatic boot setting of Gigabyte motherboard?

1. This function of automatic scheduled power-on needs to be set in the BIOS, and the advanced power management settings of your motherboard must support this function. However, most motherboards now fully support it, so feel free to use it. Step 1: Start the system and press DEL to enter the BIOS, then select "POWER MANAGEMENT FEATURES" and press Enter to enter. Find the "RESTORE ON AC/POWER LOSS" item in the power window, press Enter, and then use the arrow keys to set it The value is "POWER ON". Step 2: Select "RESUME ON RTC ALARM" and press Enter, then use the arrow keys to set its value to "ENABLE" Step 3: Select "RTC ALARM DATE" and press Enter, then set its value Set to "EVERYDAY", which means performing the same operation every day. In the same way, set "RTC ALARM HOURS", "RTC ALARM MINUTE" and "RTM ALARM SECOND" to "07", "15" and "00" respectively. It means that the boot time is "7:15:00" in the morning. After all settings are completed, press F10 to save and restart. (Due to the different BIOS of different motherboards, the settings of some motherboards may be a little different from the above. But just remember to find the words "WAKE UP" in the power management, because this is the option to set the scheduled boot)

The above is the detailed content of Does a Gigabyte motherboard run automatically as soon as it is powered on?. For more information, please follow other related articles on the PHP Chinese website!