Tips for dealing with black screen at startup (why the screen goes black after the computer is turned on for a while)

王林
Release: 2024-02-14 14:30:34
forward
2066 people have browsed it

Tips for dealing with black screen at startup (why the screen goes black after the computer is turned on for a while)

php editor Xiaoxin introduces you to the skills to deal with the black screen at startup. A black screen after turning on the computer for a while may be caused by a variety of reasons, such as hardware failure, driver problems, operating system errors, etc. You can try some simple methods to solve this problem, such as checking the power cord connection, reinstalling the graphics card driver, entering safe mode, etc. If the problem persists, you may need to perform more in-depth troubleshooting or seek professional technical support. Only by remaining patient and cautious and eliminating possible causes step by step can you solve the problem of black screen at startup.

The computer screen turns black after turning on the computer. What's going on?

First of all, we determine what is the problem based on whether the light on the monitor is on or not.

The first situation: If the light is on and is blue or green, and the monitor screen is black, it means that the data has been transferred to the monitor but the monitor is damaged. When the monitor screen is black and the indicator light is normal, it is speculated that the backlight is not on due to the high voltage board not outputting. It is recommended to repair the high voltage board to solve the problem.

The second situation: The light is on but is yellow or red, indicating that no data is being transmitted, which may be caused by poor contact of the monitor data cable.

In addition, there are:

1. The computer motherboard cmos battery is dead.

Check whether the graphics card is installed correctly and make sure it is in good contact with the motherboard slot. At the same time, also check the contact between other boards (such as sound card, network card, video card) and the motherboard slot.

3. Caused by poor CPU contact.

4. Caused by poor contact of the memory module.

5. The computer is infected with a virus and the bios is destructively refreshed.

6. If the screen resolution does not match, you can first find a normal monitor and adjust your refresh rate to the lowest level, and then try to adjust it from the lowest level upwards. The display resolution of a computer is an indicator of how many pixels a computer monitor can display. First, you need to connect the computer's power cord, turn on the desktop computer, wait until the green startup light turns on, and then press CTRL ALT F7 to restore the default resolution. It can also be solved by changing the resolution of the computer after turning it on.

The above is the detailed content of Tips for dealing with black screen at startup (why the screen goes black after the computer is turned on for a while). For more information, please follow other related articles on the PHP Chinese website!

Related labels:
source:jingfakeji.com
Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
Popular Tutorials
More>
Latest Downloads
More>
Web Effects
Website Source Code
Website Materials
Front End Template