hpbios cannot boot from USB disk and the system is not started

php editor Youzi will introduce to you a common problem, that is, the HP computer BIOS cannot start the system through the USB disk. When using HP computers, we sometimes encounter the problem of being unable to boot the system through a USB flash drive, which brings some trouble to our use. Next, we will provide you with a detailed solution to this problem, hoping to help you.

HP ProDesk 400 G4 MT

Two days ago I encountered an HP ProDesk model Unfortunately, the system of the 400 G4 MT office computer of Renshe grassroots platform crashed. At first I thought it was a mouse problem that caused the system error, but I found nothing when searching for relevant information online. Therefore, I decided to share my experience dealing with this issue here.

How to change the Bios settings of HP ProDesk 400 G4 MT to boot from USB disk?

First of all, we need to know that the BIOS of HP brand machines is usually entered by pressing the F10 key. So after booting up, press the F10 key to enter the BIOS. Once inside, you'll notice that the BIOS here is completely different from the BIOS versions we've seen on older computers before, but don't worry. Everything remains the same, and we can still see many of the settings inside at a glance. For the sake of clarity, we need to set the language to Chinese first.

Change language

Second, as shown above, use the mouse to directly click on the advanced column, we see The first line below is the display language. Select it and the image below will appear. Then select Simplified Chinese.

Change Chinese settings

3. After the changes, we can see the familiar Chinese interface. Mandarin is easier to understand! Ha ha! It turns out that the main menu "advanced" in HP computers means advanced in Chinese.

Fourth, select the fourth Secure Boot Configuration in the advanced menu, which is the secure boot configuration, and you will enter the interface as shown below. They are English interface and Chinese interface.

English interface

##Chinese interface

Fifth, choose to enable legacy support and disable secure boot, but do not choose the other one. It should be noted that changing these places may require restarting security authentication. You will be prompted to enter a set of numbers. Just enter as required. As shown in the figure below

6, return to advanced, select the third boot options and press Enter to set the startup sequence. As shown below, the Chinese and English interface.

English interface

##Chinese interface

Seven, because of the above steps, the old boot method can be allowed at this time. At this time, check the box in front of the old boot sequence. If you have it, there is no need to move it. Finally, press F10 to save. At this time, our PE USB disk tool system can be fully started.

Summary:

In general, the BIOS of HP ProDesk 400 G4 MT is not too difficult. But now that the computer industry is in decline, many IT workers working at the bottom will have less and less exposure to new computers and less experience due to problems such as stocking and order volume. So sometimes it’s difficult to get a new computer. I still hope you can share more.

The above is the detailed content of hpbios cannot boot from USB disk and the system is not started. For more information, please follow other related articles on the PHP Chinese website!