php editor Xigua will introduce to you how to enter the BIOS of the South China motherboard. BIOS is the basic input and output system of the computer system and is the bridge between the hardware and the operating system. Enter the BIOS to perform system settings and hardware adjustments. The method of entering the BIOS for South China motherboards is as follows: 1. Press the Del key or F2 key when booting until you enter the BIOS interface; 2. In the BIOS interface, you can use the direction keys and Enter key on the keyboard to make settings and adjustments. Please note that before entering the BIOS, make sure you understand and are familiar with the relevant settings to avoid misoperation causing system problems. Hope the above methods are helpful to you!
1.
Tools: ASUS notebook South China motherboard, win10. Start the computer and follow the instructions below
2.
Keep pressing the F2 key
3.
Enter the bios of the South China motherboard
How to set the motherboard BIOS to Chinese.
1. Turn on the computer and continuously click on the keyboard to enter the BIOS system settings. Each motherboard has different setting methods, but the methods are similar.
2. After entering, you will see the System option above, click it.
3. Then choose to find the System Language option through the down key on the keyboard, which is the "System Language Options".
4. You will find that English is displayed. After selecting, hit the Enter key to change it.
5. Then select the language you use, usually "Simplified Chinese".
6. Finally, we need to save our changes. Saving can be performed through the fast forward key F10, and the shortcut keys vary from computer to computer.
7. For most computers, when you press the ESC key to exit the BIOS setting interface, the system will prompt whether to save. At this time, select "Yes" to save the setting operation. In this way, when you enter the BIOS setting interface in the future, it will be in Chinese.
1. Press the DELETE key on the keyboard when booting to enter the BIOS.
2. Enter the main interface of BIOS.
3. The first item is Standard CMOS Features, which is the standard setting of CMOS. Here you can set the startup sequence, onboard equipment, operating frequency, etc. Can be set according to personal needs.
4. The second item is AdvancedBIOS Features (advanced BIOS settings), which sets the first startup item when booting. It is needed when installing the system.
5. Setting method: Expand hard disk boot priority (hard disk boot priority) and set it as the first startup item.
6. Save the changed settings (yes/no).
Method 1: (Legacy traditional mode Bios setting hard disk startup method)
1. According to your computer model, find the key to enter Bios. Some computers may be Esc, or it may be F2 or F8. , or the Delete key is possible. After entering Bios, switch to the Boot tab and check whether the first startup item is the hard disk;
2. If the first startup item of the hard disk is not the hard disk, then press Enter to select Boot Option #1, and then open Select the hard drive among the options, and after pressing Enter, you will find that there is no hard drive;
3. Press the up and down keys to switch to Hard Drive BBS Priorities, and press Enter to see if there is a hard drive;
4. There is also a Boot Option #1 inside. You can see that the status at this time is Disabled, indicating that it is closed. Then press Enter directly to reselect the hard disk;
5. Return to the interface under the Boot option. Enter again and select Boot Option #1. At this time, you will find that there is a hard disk, and then set the hard disk as the first startup item;
6. Finally, you can switch to Save & Exit (it may also be Save Changes and Reset or Exit Saving Changes (meaning to exit and save), for convenience, you can usually use the shortcut key F10 directly, and then select Yes in the pop-up window. However, for some motherboards, it is not necessarily F10. You can check your own motherboard Which is the shortcut to save and exit?
Method 2: (New ASUS machine as an example) (UEFI mode Bios settings hard drive startup method), many computers with pre-installed Windows systems on the market basically use UEFI GPT boot mode, compared with the traditional Bios, there are still some differences in settings;
1. It may be Esc, it may be F2, or it may be other keys to enter Bios. Everyone You can enter the Bios settings according to the keys of your computer, enter the Bios interface, and then press F7 to enter the advanced mode to make relevant settings;
2. Switch to the Boot option and change the Boot Option #1 option to Windwos Boot Manager is a UEFI boot partition, just save the settings at the end;
1. Press and hold the Delete key while turning on the computer to enter the BIOS setting interface.
2. Select under the menu and press Enter. After selecting, press Enter again.
3. Press the button, select and press Enter. At this time, the system will restart and the BIOS motherboard will be successfully restored to factory settings.
Enter the BIOS first. Generally, just enter the BIOS and press the DELETE key. Then find the option with the word LOAD, usually in the last column. Find the option with the word LOAD in the last column, press Enter, and then confirm. Generally, make sure this step is OK, so that your motherboard can be restored to factory settings.
Another way is to disconnect the motherboard battery, or find the CMOS jumper, then unplug it and replace it with the other two pins. Just replace it after a while. If you don’t know much about this, I suggest you Use the first method to clear CMOS, that is, enter the BIOS and restore factory settings
You need to be very careful when flashing the BIOS, because the BIOS is the basic input and output system on the motherboard. Improper operation may cause the motherboard to fail to start normally or even be repaired. Therefore, before flashing the BIOS, be sure to back up the original BIOS data and ensure that you have sufficient technical knowledge and experience.
The following is the general BIOS flashing process:
1. Download the latest BIOS firmware from the South China Motherboard official website and extract it to a USB flash drive.
2. Enter the motherboard BIOS setting interface and find the "BIOS Update" or "Q-Flash" option.
3. Follow the instructions in the motherboard manual, insert the USB flash drive into the motherboard, select the option to flash the BIOS, and select the firmware file in the USB flash drive.
4. Wait for the BIOS flashing to complete. Do not turn off the power or perform other operations during the flashing process.
5. After the flashing is completed, restart the computer, enter the BIOS setting interface, restore the settings to the default values, and reset the configuration you need.
It should be noted that flashing the BIOS is very dangerous. Please read the instructions in the motherboard manual carefully and make sure you have sufficient technical knowledge and experience. If you do not have sufficient technical ability or experience, it is recommended to seek professional help or contact the motherboard manufacturer's technical support team.
The method is as follows:
Step 1: First, start the computer and enter the BIOS settings. You can enter the BIOS settings by pressing the key displayed when the computer starts (usually the F2, F12, Del or Esc key, etc.).
Step 2: In the BIOS menu, find the "Boot" or "Startup" option and press Enter to enter.
Step 3: In the "Boot" menu, you can see all available boot devices. For example, if you want to install Windows by booting from USB, you should select your USB device.
Step 4: Use the arrow keys to move the device you need to boot to the top of the boot order list (usually placing it in front of other devices), then press Enter to enter boot for this device.
Step 5: Exit BIOS setup and save changes. On some South China motherboards, you can press the F10 key or click the "Save and Exit" option to save the changes, and then press the Enter key to restart the computer.
Setting method: 1. First, you need to enter the BIOS. After pressing the power button, keep pressing the DEL key on the keyboard to enter the BIOS.
2. After entering the BIOS interface, in order to make the content more understandable, first switch to the system menu and set the language to Chinese.
3. Return to the "M.I.T" menu and select advanced memory settings.
4. First turn on the main switch of the memory frequency setting. Extreme memory profile means "extreme memory configuration".
In the BIOS settings of the South China computer motherboard, you need to turn on the following options: Fast Boot: This option can speed up the computer startup, but sometimes it may cause some problems. Choose whether to enable it according to your needs. Disabled Floppy: Almost no one uses floppy drives anymore. Disabling it can improve startup speed. Enable XHCI Master (XHCI Mode): This option can improve USB 3.0 performance and compatibility. Turn on Virtualization Technology: If your computer supports virtualization technology, such as a virtual machine installed, it is recommended to turn on this option. Turn on Energy Management: This option allows you to adjust the CPU's energy-saving settings, including functions such as EIST and C1E. Automatically check startup items (Boot Check): This option can automatically check the startup device to avoid startup failure caused by startup device problems. Turn on Multi-core Optimization: If your computer has a multi-core processor, turning on this option can improve the performance of the processor. Set system health status (System Health Monitor): This option can monitor the running status of the system and help to detect and deal with problems in a timely manner. Please note that specific options may vary depending on motherboard model and BIOS version. It is recommended to read the motherboard manual carefully or consult a professional before modifying the BIOS settings to avoid unnecessary trouble.
The above is the detailed content of How to enter bios on South China motherboard?. For more information, please follow other related articles on the PHP Chinese website!
win10 bluetooth switch is missing
Why do all the icons in the lower right corner of win10 show up?
The difference between win10 sleep and hibernation
Win10 pauses updates
What to do if the Bluetooth switch is missing in Windows 10
win10 connect to shared printer
Clean up junk in win10
How to share printer in win10
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
