php editor Xigua brings you the answer to the Gigabyte motherboard power-on settings. GIGABYTE motherboards are one of the most popular computer motherboard brands with simple and flexible setup methods. Whether you are a novice or an experienced user, just follow the steps below to set up and power on smoothly. Next, let’s take a look at the specific setting methods!
1.
First enter the BIOS, use the up, down, left and right keys on the keyboard to control the options, select the POWERMANAGEMENT main option, select the first item in the main option, this item controls whether to support incoming call startup , the default is off;
2.
You need to set off to startup, press and hold Enter on the keyboard, select startup and shutdown;
3.
After selecting, press and hold Enter to enable it to support incoming calls.
4.
You also need to set the startup time. The startup time is in the last item, and the default setting is not allowed (Disabled);
5.
Hold down the Enter key on the keyboard, select Enabled, and press Enter;
Answer: The steps for GIGABYTE motherboard to set up the first boot of SSD are as follows. 1. Turn on the computer first, then when prompted, press del.
2. Enter the BIOS and select BIOS.
3. Select the boot option and select your SSD. If it is uefi startup, you must select uefi, otherwise select SSD.
4. Then press f10 and select yes.
The steps are as follows:
1. Turn on the computer and enter the UEFI interface: When the computer is turned on, press or repeatedly press the corresponding button (such as Del, F2, F12, etc.) to enter the UEFI settings of the motherboard interface.
2. Navigate to the "Boot" or "Startup" option: In the UEFI interface, use the keyboard arrow keys to navigate to the "Boot" or "Startup" option.
3. Find the UEFI fast boot option: In the "Boot" or "Startup" options, look for options similar to "Fast Boot" or "Quick Start".
4. Enable UEFI fast boot: Use the keyboard to select the UEFI fast boot option and set it to "Enabled" or "Enabled".
5. Save and exit: After the settings are completed, press the corresponding key (such as F10) to save the settings and exit the UEFI interface.
Please note that the above steps are for reference only, and the actual operations may vary depending on GIGABYTE motherboard models and versions. It is recommended to read the motherboard's user manual carefully or find relevant technical support documents to obtain accurate operating steps before setting up. Also note that modifying UEFI settings is risky and should be done with caution to avoid unnecessary settings changes.
There are two ways to enter the boot options on Gigabyte motherboards: one is to enter through the BIOS, and the other is to enter through the shortcut keys. The following are introduced respectively:
1. Enter through BIOS:
1. Press the Delete key when booting to enter the BIOS interface.
2. In the BIOS interface, use the arrow keys to switch to the right to switch to the "Boot" tab.
3. In the "Boot" tab, use the arrow keys to select "Boot Option Priorities" and press the Enter key.
4. In the "Boot Option Priorities" interface, select the device to be booted, such as a USB flash drive or CD-ROM. Increase its priority, then press the F10 key to save the settings and exit the BIOS.
2. Enter through shortcut keys:
1. Press the F12 key when booting to enter the startup options interface.
2. In the startup options interface, use the direction keys to select the device to be started, such as a USB flash drive or CD-ROM, and then press the Enter key to start.
In short, the above two methods can quickly enter the startup options of the Gigabyte motherboard, and users can choose according to their actual situation.
The method to enable secure boot in Gigabyte bios is as follows
1. First enter the BIOS, use the up, down, left and right keys on the keyboard to control the options, select the POWERMANAGEMENT main option, and select the first item in the main option. Whether a control supports incoming call startup, the default is off;
2. You need to set shutdown to startup, press Enter on the keyboard to select startup and shutdown;
3. Select After that, press and hold Enter, and it will be set to support incoming calls.
4. You also need to set the startup time. The startup time is in the last item, and the setting is not allowed by default (Disabled);
5. Press and hold the Enter key on the keyboard and select Enabled. Click Enter to set up successfully.
Regarding this issue, the following are the steps to set up a quick start for the Gigabyte h110 motherboard:
1. Enter the BIOS setup interface. Press the key prompted when the computer is turned on (usually the F2 or Delete key) to enter the BIOS settings.
2. Find the "Advanced BIOS Features" menu. This menu may vary between motherboard models, but is usually found in the first level of menus.
3. Find the "Boot Sequence" option. In this option, you can set the priority and order of boot devices. Move the device that needs to be started (such as a hard disk or optical drive) to the front of the list.
4. Find the “Quick Boot” option. This option may be in the Advanced BIOS Features menu or elsewhere. Set it to "Enabled" to enable fast boot mode.
5. Save settings and exit BIOS. Press the "F10" key on the keyboard to save the settings and exit the BIOS setup interface.
6. Restart the computer. When starting up, the computer will quickly load the boot device and skip some irrelevant detection and configuration processes to speed up startup.
It should be noted that fast boot mode may turn off certain BIOS detection and configuration items, which may cause certain problems. If something abnormal happens to your computer, you can try turning off the fast startup mode and restarting your computer.
The above is the detailed content of How to set up the power on Gigabyte motherboard?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
