How to restore bios on gigabyte b150

php editor Banana will answer a common question for everyone: How to restore the BIOS of Gigabyte B150 motherboard? Restoring the BIOS is a common solution when the motherboard fails or is set up incorrectly. First, shut down the console and disconnect it from the power source. Then, find the BIOS battery on the motherboard and remove it. Wait about 5 minutes before reinserting the battery. Next, reconnect the power supply and start the computer. At this point, the BIOS will be restored to factory settings and the problem should be resolved. It should be noted that restoring BIOS may cause the loss of previous settings and data, so it is best to back up important data before operation.

To restore the BIOS of your Gigabyte B150 motherboard, you can follow these steps:

1. Prepare an empty USB flash drive: You will need a A bootable USB flash drive. Make sure that the flash drive does not contain important data as all data will be deleted during the process.

2. Visit GIGABYTE's official website: Visit GIGABYTE's official website (https://www.gigabyte.com/) and find the support page for the B150 model motherboard you are using.

3. Download the latest BIOS file: Find and download the latest BIOS file on the motherboard's support page. Make sure to select the correct version that matches your motherboard model.

4. Prepare the BIOS update tool: On the support page, you can usually find the BIOS update tool named "@Bios". Please follow the instructions to download and install the tool.

5. Create a USB boot drive: Run the installed "@Bios" tool and select "Create a bootable USB flash drive" or similar option to create a boot disk. Follow the tool's instructions to select the correct USB drive and BIOS file.

6. Enter BIOS recovery mode: Insert the USB boot drive into the computer's bootable USB interface (usually a USB 2.0 interface), and then restart the computer. Press the appropriate key (usually DEL, F2, F11, or F12) during startup to enter the computer's BIOS setup interface.

7. Perform BIOS recovery operation: In the BIOS setup interface, find "Q-Flash" or a similar option, and then select "Update BIOS from Drive" or a similar option. In the pop-up dialog box, select the USB boot drive created previously. After confirmation, the system will start automatically installing the new BIOS file.

8. Complete the installation: After the BIOS update process is completed, the computer will automatically restart. Make sure not to turn off the power or interfere with the normal operation of the computer during the update process.

Please note that you must understand the system requirements and precautions before performing BIOS update or recovery operations. If you are unsure about BIOS operation, it is recommended to consult GIGABYTE official support or experienced users for help to avoid unexpected situations or data loss.

The above is the detailed content of How to restore bios on gigabyte b150. For more information, please follow other related articles on the PHP Chinese website!