Home Computer Tutorials Computer Knowledge Centos7 system adds a tutorial to bind multiple IPs at one time.

Centos7 system adds a tutorial to bind multiple IPs at one time.

Feb 18, 2024 pm 04:39 PM
ip Configuration file nano

Centos7 system adds a tutorial to bind multiple IPs at one time.

The steps to add and bind multiple IPs at one time on CentOS 7 system are as follows:

  1. Open the network configuration file:

    • Use a text editor (such as nano or vi) to open the network configuration file, usually located
      /etc/sysconfig/network-scripts/ifcfg-<interface></interface>.
    • Example: Open the network configuration file using nano editor:

      sudo nano /etc/sysconfig/network-scripts/ifcfg-<interface>
      Copy after login
  2. Add multiple IP addresses:

    • In the opened file, find the network interface section where you want to add multiple IP addresses.
    • Copy the original configuration and modify the following parameters:

      • IPADDR: Set a new IP address.
      • NETMASK: Set the corresponding subnet mask.
      • DEVICE: Set the device name corresponding to the new IP address.
      • Add a new configuration file to differentiate each IP address.
    • Example:

      # 原有的配置TYPE=EthernetBOOTPROTO=staticNAME=<interface>DEVICE=<interface>>
      Copy after login
  3. Save and close the file:

    • Press
      in the text editor Ctrl X, then press
      YConfirm to save changes.
  4. Restart network service:

    • Execute the following command to restart the network service and make the new IP address take effect:

      sudo systemctl restart network
      Copy after login
  5. Verify IP address:

    • Execute the following command to view the IP address and status of the network interface:

      ip addr show <interface>
      Copy after login
      • <interface></interface>: The name of the network interface to view the IP address.

Now, you have successfully added and bound multiple IP addresses at one time on the CentOS 7 system. You can use the steps above to add more IP addresses to each interface to meet your network needs. Please ensure that the IP address is set correctly and configured appropriately according to the network environment and needs.

The above is the detailed content of Centos7 system adds a tutorial to bind multiple IPs at one time.. For more information, please follow other related articles on the PHP Chinese website!

Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Article

R.E.P.O. Energy Crystals Explained and What They Do (Yellow Crystal)
2 weeks ago By 尊渡假赌尊渡假赌尊渡假赌
Hello Kitty Island Adventure: How To Get Giant Seeds
1 months ago By 尊渡假赌尊渡假赌尊渡假赌
Two Point Museum: All Exhibits And Where To Find Them
1 months ago By 尊渡假赌尊渡假赌尊渡假赌

Hot Tools

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

SublimeText3 Chinese version

SublimeText3 Chinese version

Chinese version, very easy to use

Zend Studio 13.0.1

Zend Studio 13.0.1

Powerful PHP integrated development environment

Dreamweaver CS6

Dreamweaver CS6

Visual web development tools

SublimeText3 Mac version

SublimeText3 Mac version

God-level code editing software (SublimeText3)

How do websites set black/whitelist IP restrictions and country and city IP access restrictions through nginx? How do websites set black/whitelist IP restrictions and country and city IP access restrictions through nginx? Jun 01, 2023 pm 05:27 PM

1. Black/white list IP restricted access configuration nginx There are several ways to configure black and white lists. Here are only two commonly used methods. 1. The first method: allow, denydeny and allow instructions belong to ngx_http_access_module. nginx loads this module by default, so it can be used directly. This method is the simplest and most direct. The setting is similar to the firewall iptable. How to use: Add directly to the configuration file: #Whitelist settings, followed by allow is accessible IPlocation/{allow123.13.123.12;allow23.53.32.1/100;denyall;}#Blacklist settings,

What does binding ip and mac mean? What does binding ip and mac mean? Mar 09, 2023 pm 04:44 PM

IP and mac binding refers to associating a specific IP address with a specific MAC address, so that only the device using the MAC address can use the IP address for network communication. Binding ip and mac can prevent the IP address of the bound host from being spoofed. Prerequisites: 1. The MAC address is unique and cannot be spoofed; it can only be bound to hosts on the network directly connected to the router (that is, The host's gateway is on the router).

How to use Linux nano command How to use Linux nano command May 18, 2023 pm 03:20 PM

1. Introduction to nano command Nano is a small, free, and friendly editor designed to replace Pico, the default editor in the non-free Pine package. Nano not only replicates the look and feel of Pico, but also implements some features that are missing (or disabled by default) in Pico, such as "Search and Replace" and "Go to Line and Column Numbers". nano is a character terminal text editor, a bit like the editor program under DOS. It is much simpler than vi/vim and is more suitable for Linux beginners. The default editor of some Linux distributions is nano. For example, Ubuntu system has nano installed by default. 2. Nano command usage examples 1. Command installation [root@s142

How to check IP address on WeChat How to check IP address on WeChat May 31, 2023 am 09:16 AM

How to check the IP address on WeChat: 1. Log in to the computer version of WeChat, right-click the taskbar at the bottom of the screen, and click "Task Manager"; 2. When the task manager pops up, click "Details" in the lower left corner; 3. Task management Enter the "Performance" option of the browser and click "Open Resource Monitor"; 4. Select "Network" and check the WeChat process "Wechat.exe"; 5. Click "TCP Connection" below to monitor the WeChat network IP related situation. Sending a message and getting a reply will reveal the other person's IP address.

How to set directory whitelist and ip whitelist in nginx How to set directory whitelist and ip whitelist in nginx May 18, 2023 pm 03:52 PM

1. Set the directory whitelist: There is no restriction on the specified request path. If there is no restriction on the request path to the api directory, it can be written as server{location/app{proxy_passhttp://192.168.1.111:8095/app ;limit_connconn20;limit_rate500k;limit_reqzone=fooburst=5nodelay;}location/app/api{proxy_passhttp://192.168.1.111:8095/app/api}}#Because nginx will give priority to accurate matching

Super complete! Common ways to write configuration files in Python Super complete! Common ways to write configuration files in Python Apr 11, 2023 pm 10:22 PM

Why should we write the fixed file of the configuration file? We can directly write it as a .py file, such as settings.py or config.py. The advantage of this is that we can directly import parts of it through import in the same project; but if we need to use it in other When sharing configuration files on non-Python platforms, writing a single .py is not a good choice. At this time we should choose a common configuration file type to store these fixed parts. Currently, the commonly used and popular configuration file format types mainly include ini, json, toml, yaml, xml, etc. We can access these types of configuration files through standard libraries or third-party libraries.

How to enable or disable eSIM on Windows 11 How to enable or disable eSIM on Windows 11 Sep 20, 2023 pm 05:17 PM

If you bought your laptop from a mobile operator, you most likely had the option to activate an eSIM and use your cellular network to connect your computer to the Internet. With eSIM, you don't need to insert another physical SIM card into your laptop because it's already built-in. It is very useful when your device cannot connect to the network. How to check if my Windows 11 device is eSIM compatible? Click the Start button and go to Network & Internet &gt; Cellular &gt; Settings. If you don't see the "Cellular" option, your device doesn't have eSIM capabilities and you should check another option, such as using your mobile device to connect your laptop to a hotspot. In order to activate and

How to obtain the user's real IP address based on nginx reverse proxy How to obtain the user's real IP address based on nginx reverse proxy May 13, 2023 pm 05:07 PM

Introduction When nginx is used as a reverse proxy, the IP address obtained by the default configuration backend comes from nginx. Use request.getRemoteAddr(); to obtain the IP address of nginx, not the user's real IP. 1. Modify Nginx Configuration: server{listen80;server_namejenkins.local.com;location/{proxy_set_headerHost$host;proxy_set_headerX-Real-IP$remote_addr;proxy_passhttp://192.168.10.

See all articles