How to install open wire pipe to look good?

php editor Xigua introduces you to the installation techniques of open wire pipes. Open wire conduit is a common concealed conduit for electrical wires. After installation, it can effectively beautify the interior decoration, but how to install it to make it look more beautiful? This article will introduce in detail the installation steps and precautions for open wire conduits to help you easily create a neat and beautiful indoor wiring layout.

How to install open wire pipes to look good?

It is not good to install open wire conduits on the wall. Installing line cards, junction boxes and switches on the wall does not look good. The main reason is that the intersection between the switch and the wire conduit is difficult to handle.

It is recommended that you use PVC groove plate for installation. It is square and fixed in the groove plate. The switch and the groove plate have a good connection. If any problem occurs, it can be easily dealt with.

How to connect the charging cable adapter?

Plug converters generally have a lot of sockets and plugs. In order to facilitate users to carry them, the plugs are usually hidden in design, and specific plugs can be adjusted according to the country of travel. Since today's electrical appliances not only have ordinary power plug inputs, but many smart devices also have USB power inputs, the converter also has two to three USB output interfaces.

For the convenience of use and placement, the converter has a square design and can stand in a stable position, thereby facilitating the output and input of the power supply. The power output is generally at the top, which is the most user-friendly position

How to wire the open wire junction box?

1. When the wiring conduit encounters a 90º corner or corner, the wiring conduit must not be used. Knock it hard, and do not break the bend by hand. Use a special tool spring chain to bend the wiring conduit to form a natural turn. The installation is firm and no looseness.

2. When the wiring pipe touches the water heater, the wiring pipe should be separated. The distance between the two pipes should be 20 centimeters, and the hot water pipe should go down. The wire tube goes up.

3. Indoor conduits should be buried separately for strong and weak current lines. Indoor lighting lines, ordinary socket lines, air conditioning socket lines, kitchen, bathroom and other electrical equipment lines should be routed separately. Connect the leakage protection device (air switch).

4. Electrical wiring for lighting and sockets should be divided into colored wires. The live wires are divided into red, yellow, green and white. The neutral wires are divided into light blue and dark blue. The grounding wires are divided into two-color wires.

5. Each main pole socket is connected to the ground wire 3 for protection. The wires must not have splicing terminals in the line tube. The wires have terminals in the junction box. The copper wire at the head should not be less than 6 turns and should be wrapped with waterproof tape. , There must be no laxity. Tighten the screws of the wires at the center of the switch socket panel and there must be no laxity. The code L on the right side of the three-pole socket is the live wire, the code N on the left side is the neutral line, and the code E is the ground.

6. Reserve 15 cm of wire length on the vertical wall of the wire box. Take up the wires and compact them in the wire box. Encapsulate the exposed wire ends with insulating glue and compact them in the wire box. Wrap the loops of external wires with tape and do not hang them randomly.

7. Lighting switches, sockets, TV sockets, telephone sockets, network socket covers, intelligent control boxes, network mid-range boxes, etc. must be installed squarely, firmly, without looseness, close to the wall, and without any loose edges around them. There is a gap, the switch is flexible, the opening direction is installed according to the material label instructions, the plug is suitable, the left zero and right live wires, and the upper ground wire.

8. Lamps, exhaust fans, range hoods, air conditioners, bathroom heaters, leakage circuit breakers (air switches), etc. must be installed flat and firm, with no gaps or looseness around them.

Founder Technology keyboard connects five wires to four wires?

The commonly used four cables behind the chassis are keyboard, mouse, speaker, and monitor. The shapes and sizes of these four plugs are not very similar. The mouse is usually a USB interface, and it can be plugged into any USB interface ( If it has the same round port as the keyboard, you can check the color. The color of the port is the same as the color of the plug on the mouse.) Plug the keyboard into the port of the same color as it (pay attention to the position of the short positioning post inside not to mistake it. If it is a USB port, just plug it into any USB port); the audio cable of the speaker is plugged into the green sound card port; the monitor is connected to the graphics card.

Just pay attention to the computer wiring, that is, do not use violence, and it can be plugged in. This basically means that it is correct. Even if it is wrong, it will not affect the service life of the machine or damage the machine.

The above is the detailed content of How to install open wire pipe to look good?. For more information, please follow other related articles on the PHP Chinese website!