Usage of WPSdatedif function
WPS is a commonly used office software suite, in which the WPS table function is widely used for data processing and calculations. In the WPS table, there is a very useful function, the DATEDIF function, which is used to calculate the time difference between two dates.
The DATEDIF function is the abbreviation of the English word Date Difference. Its syntax is as follows:
DATEDIF(start_date, end_date, unit)
Among them, start_date represents the starting date and end_date Indicates the end date, and unit indicates the unit of time difference.
The DATEDIF function has several important considerations to note. First, the date must be entered in the correct format, otherwise the function may not work properly. Secondly, the DATEDIF function can only calculate the complete time difference between two dates, that is, it does not take into account the hours, minutes, and seconds between the start date and the end date.
Next, we will discuss the common uses of the DATEDIF function in detail.
- Calculate the difference in days between two dates:
If we want to calculate the difference in days between two dates, we can set the unit parameter to " d". For example, we can calculate the difference in days between July 1, 2021 and January 1, 2022 using the following formula:
=DATEDIF(DATE(2021,7,1), DATE(2022,1 ,1), "d")
In this example, the function will return a result of 183, indicating that the difference between the two dates is 183 days.
- Calculate the difference in months between two dates:
If we want to calculate the difference in months between two dates, we can set the unit parameter for "m". For example, we can calculate the difference in months between January 1, 2020 and January 1, 2022 using the following formula:
=DATEDIF(DATE(2020,1,1), DATE(2022, 1,1), "m")
In this example, the function will return a result of 24, indicating that the difference between the two dates is 24 months.
- Calculate the difference in years between two dates:
If we want to calculate the difference in years between two dates, we can set the unit parameter to " y". For example, we can calculate the difference in years between January 1, 2010 and January 1, 2022 using the following formula:
=DATEDIF(DATE(2010,1,1), DATE(2022,1 ,1), "y")
In this example, the function will return a result of 12, indicating that the difference between the two dates is 12 years.
- Calculate the months between two dates:
In addition to calculating the time difference, the DATEDIF function can also be used to calculate the months between two dates. Specifically, if we want to calculate how many complete months have passed between one date and another date, we can set the unit parameter to "ym". For example, we can use the following formula to calculate how many months have passed from March 15, 2021 to May 20, 2022:
=DATEDIF(DATE(2021,3,15), DATE(2022,5 ,20), "ym")
In this example, the function will return a result of 14, indicating that 14 complete months have passed between these two dates.
In short, the DATEDIF function is a very useful function in the WPS table, which can help us calculate the time difference between two dates. By using the DATEDIF function properly, we can process and calculate date data more efficiently. I hope this article will help you understand the usage of the DATEDIF function.
The above is the detailed content of Usage of WPSdatedif function. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
AI Hentai Generator
Generate AI Hentai for free.
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
WPS and Office do not have Chinese fonts, and Chinese font names are displayed in English.
Jun 19, 2024 am 06:56 AM
My friend's computer, all Chinese fonts such as imitation Song, Kai style, Xing Kai, Microsoft Yahei, etc. cannot be found in WPS and OFFICE. The editor below will tell you how to solve this problem. The fonts in the system are normal, but all fonts in the WPS font options are not available, only cloud fonts. OFFICE only has English fonts, not any Chinese fonts. After installing different versions of WPS, English fonts are available, but there is also no Chinese font. Solution: Control Panel → Categories → Clock, Language, and Region → Change Display Language → (Region and Language) Management → (Language for Non-Unicode Programs) Change System Regional Settings → Chinese (Simplified, China) → Restart. Control Panel, change the view mode in the upper right corner to "Category", Clock, Language and Region, change
How to use wps translation function_How to use wps translation function
Mar 27, 2024 pm 04:46 PM
1. First, we open wpsoffice on the mobile phone. 2. Then click Apply. 3. Click the image to translate. Method 2 1. First, we open wpsoffice on the mobile phone. 2. Open the document that needs to be translated and click the tool in the lower left corner. 3. Click Review and Translate.
How to center the WPS Word table
Mar 21, 2024 pm 02:21 PM
When using word in WPS, you often need to insert pictures, tables, etc., but if the inserted table is not centered, it will affect the beauty of the entire document. So how to set the centering of the WPS table? Today I will teach you how to make adjustments. The specific steps are as follows. Come and take a look! 1. The table in the picture is not in the middle of the page, which is not very beautiful. I want it to be centered. 2. First, right-click the mouse in the table (as shown in the picture). 3. Then click [Select All Tables] in the right-click menu (as shown by the red arrow in the figure). 4. After clicking, the table will be fully selected (as shown in the figure below). 5. At this time, click to open the [Start] tab of wps text (as shown by the red arrow in the figure). 6 o'clock
Introduction to the method of editing watermark with WPS
Mar 27, 2024 pm 02:06 PM
1. We use WPS to open a document. There is a watermark in it. It looks messy. How to remove it? Look down. 2. Find the Insert tab in the menu bar, select the header and footer icons under this tab, and click on them with the left mouse button. 3. At this time, the text on the page becomes gray and cannot be edited, but the watermark on the back of the text can be edited at this time. 4. Click on the watermark, you can see that this is a picture watermark, because there are several small squares around the picture, and the picture can be edited at this time. 5. Use the delete key on the keyboard to delete the picture, and you can see that the watermark is gone. 6. Double-click the mouse on the page to exit the header and footer editing mode. The text on the page returns to normal color and can be edited, but at this time the watermark on the page has disappeared. 7.
Why macros still cannot be enabled after wps installs vba
Mar 21, 2024 am 08:30 AM
wpsOffice is an office software suite independently developed by Kingsoft Software Co., Ltd., which can realize multiple functions such as text, forms, presentations, and PDF reading. It has the advantages of low memory usage, fast running speed, multiple cloud functions, powerful plug-in platform support, free massive online storage space and document templates. What the editor will introduce to you today is the "macro" function. In the past few days, friends have always asked me why I still can't enable macros after installing VBA. The "macro" function is still gray and cannot be opened, as shown below. What's going on? The editor will find out the reasons for you. There are three main reasons for this situation: 1. Does your wps support vba? Some versions do not support it. 2. Confirm that you have enabled macros and whether the operation
How to create a QR code using wps
Mar 28, 2024 am 09:41 AM
1. Open the software and enter the wps text operation interface. 2. Find the insert option in this interface. 3. Click the Insert option and find the QR code option in its editing tool area. 4. Click the QR code option to pop up the QR code dialog box. 5. Select the text option on the left and enter our information in the text box. 6. On the right side, you can set the shape of the QR code and the color of the QR code.
How to set WPS value to automatically change color according to conditions_Steps to set WPS table value to automatically change color according to condition
Mar 27, 2024 pm 07:30 PM
1. Open the worksheet and find the [Start]-[Conditional Formatting] button. 2. Click Column Selection and select the column to which conditional formatting will be added. 3. Click the [Conditional Formatting] button to bring up the option menu. 4. Select [Highlight conditional rules]-[Between]. 5. Fill in the rules: 20, 24, dark green text with dark fill color. 6. After confirmation, the data in the selected column will be colored with corresponding numbers, text, and cell boxes according to the settings. 7. Conditional rules without conflicts can be added repeatedly, but for conflicting rules WPS will replace the previously established conditional rules with the last added rule. 8. Repeatedly add the cell columns after [Between] rules 20-24 and [Less than] 20. 9. If you need to change the rules, you can just clear the rules and then reset the rules.
Why can't videos on wps be played?
Mar 20, 2024 am 11:22 AM
In our daily work and study, we often use videos to report and share with everyone the interesting videos we see, novel videos, or some video materials we shot casually. During the sharing process, the video data cannot be played. Why? The editor below will introduce to friends who are in front of the computer why the video on WPS cannot be played. I hope it can be helpful to everyone. Let's learn it together! 1. First, we open the PPT document in WPS, select the video material that cannot be played, right-click and select the "Delete" button. As shown in the picture; 2. Then click "Insert" in the menu bar, find "Video" in the toolbar, and click "Embed local video", as shown in the picture; 3. Re-import the video, and then click to play
