MSI zh77a-g43 motherboard supports M2?
php editor Yuzai brought a detailed answer on whether the MSI ZH77A-G43 motherboard supports the M.2 interface. As a high-speed transmission interface, the M.2 interface is sought after by many users. It is very important for users to know whether the motherboard supports the M.2 interface, because this will directly affect the possibility of future hardware upgrades and expansions. Next, we will take a look at whether the MSI ZH77A-G43 motherboard supports the M.2 interface and how to configure it.
MSI zh77a-g43 motherboard supports M2?
1. Not supported. 2. Because the MSI zh77a-g43 motherboard is an older motherboard model and does not have the hardware design and functionality to support the M.2 interface. 3. If you need to use M.2 interface hardware, you need to choose another motherboard model that supports M.2 interface or use other adapters to connect M.2 devices.
How to connect the jumper on zh77a-g43 motherboard?
According to my understanding, there is no jumper setting on the MSI ZH77A-G43 motherboard. Traditionally, jumpers are mainly used for BIOS settings or hardware configuration on some old motherboards. Modern motherboards generally use BIOS settings or software to configure and adjust.
If you need to make some specific settings, such as clearing CMOS, resetting BIOS or other configurations, you can try the following methods:
1. Clear CMOS: Turn off the computer power and disconnect the power cord , find the CMOS battery on the motherboard (usually a small round battery), gently remove the battery and wait a few minutes before reinserting it. This clears the settings in CMOS.
2. BIOS setting: Press the DEL or F2 key to enter the BIOS setting interface when booting, and then make relevant settings and adjustments as needed.
3. Software tools: You can download and install the motherboard management software officially provided by MSI, such as MSI Command Center, etc., and perform settings and adjustments through the software.
Please note that before performing any operation, it is recommended to consult the motherboard's user manual or contact the manufacturer for accurate operation methods, and to ensure that your operations are correct and safe.
How is the price/performance ratio of zh77a-g43 motherboard now?
Although it is a bit old, this was the most cost-effective motherboard at that time.
MSI zh77a-g43 has brought very good experience value to many consumers, and many users have made very good comments about it. Moreover, the follow-up guarantee and service of this motherboard are among the best in the industry, and the price/performance ratio is pretty good.
Can MSI motherboard ZH77A-G43 be equipped with solid-state drives?
ZH77A-G43 can of course be loaded with solid state drives.
1. You must turn on AHCI in the BIOS before installing the system. 2. Use the W7 installation disk to partition and format, and 4K will naturally be aligned. It is more troublesome to align 4K after partitioning with other software. 3. Search for SSD hard disk optimization and follow its instructions to turn off some functions dedicated to mechanical disks. 4. After formatting, you can also use the GHOST installation system. There will be no 4K alignment issues.How to adjust the zh-wm display screen?
1. First, click "Start" in the lower left corner of the computer--then click "Control Panel".
2, and then click "Appearance and Personalization" in the pop-up dialog box.
3. Select "Adjust screen resolution" in the "Display" column.
4. In the "Resolution" in the dialog box, use the drop-down triangle to select the corresponding resolution. We can choose the largest resolution. First adjust and see the results. Select the resolution and click "OK" ".
5. After selection, the computer will go dark for 0.5 seconds, and then a dialog box will pop up. Select "Keep Changes" in the pop-up dialog box to modify the computer screen size. 6. After adjusting, look at our computer screen again. The modification has been successful. Expanded information 1. Computer monitors are also often called computer monitors or computer screens. It is the most important computer component besides the CPU, motherboard, memory, power supply, keyboard, and mouse. It is a display tool that displays certain electronic file information on the screen through a specific transmission device and then reflects it to the human eye. . 2. Currently, computer monitors are divided into two categories: LED displays and LCD displays.
The above is the detailed content of MSI zh77a-g43 motherboard supports M2?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics



How to adjust the computer screen when it turns yellow? 1. Move the slider in the window to adjust the screen color, and the problem is solved. The method may be caused by a problem with the monitor data cable or poor contact. You can check whether the interface is loose and then replace the connection cable with a new one. 2. Click the Windows icon in the lower left corner of the computer, and then click Settings. In the settings interface, click System. Select Display, click Advanced display settings, and that's it. First open the control panel. 3. Move the slider in the window to adjust the gamma value. Finally, move the slider in the window to adjust the screen color and the problem is solved. Why does the computer screen turn yellow? It is relatively rare that the computer screen turns yellow due to a malfunction of the graphics card itself. It is recommended to have it checked for maintenance. Monitor display mode problem some display

How to set up the U disk boot in the HP notebook bios (how to enter the HP computer bios) and then insert the U disk to be booted first into the USB port of the notebook. If you want to install the system, the system program must have been prepared in the U disk. First, open the laptop. Make sure the laptop is turned off. Setting the bios must be done with the computer turned off. Then insert the U disk that you want to boot first into the USB port of the notebook. If you want to install the system, the prerequisite is that the system program has been prepared in the U disk. Take the HP ProDesk400G5SFF desktop computer as an example. Set the BIOS disk startup method: First, restart the computer and wait for the startup screen to appear. There are two ways to set up USB disk startup on HP notebooks. One is to directly press the shortcut key to select

How to cancel the MSI motherboard icon when booting 1. Press the DEL key when booting to enter the BIOS. Generally, in the "Advanced Features" item, you can find the words MSI motherboard LOGO screen. Select DISABLED, save and exit. There will no longer be this MSI motherboard LOGO screen when you turn on the computer in the future. MSI motherboard refers to the motherboard brand developed by MSI (MSI Technology Company). 2. The logo displayed when the computer is turned on is basically that of the motherboard manufacturer. You can set QUICKPOST to DISENABLE in the BIOS, so that the logo will generally no longer be displayed. It will display computer configuration-related information and give you more details. 3. First, teach you how to flash the BIOS in Windows environment. First: Go online

How to enter bios after assembling a computer? Before entering the BIOS, you need to make sure that the computer is completely shut down and powered off. Here are several common ways to enter the BIOS: 1. Use shortcut keys: Most computer manufacturers will display a prompt message at startup telling you which key to press to enter the BIOS settings. Usually the F2, F10, F12 or Delete key. After pressing the appropriate keys, you should be able to see a screen with information about your computer's hardware and BIOS settings. 2. Use the button on the motherboard: Some computer motherboards have a dedicated button for entering BIOS settings. This button is usually labeled "BIOS" or "UEFI". After pressing the button you should be able to see

What is the relationship between graphics card performance and monitor resolution? 1. Both the monitor and graphics card have the highest (and best) resolution (usually with a corresponding refresh rate). When the two match, it is perfect. Otherwise, the graphics card has the highest resolution. It must be higher than the maximum resolution of the monitor to achieve the display of the maximum resolution of the monitor. For example. 2. The computer screen resolution is related to both the graphics card and the monitor. The better the graphics card, the higher the resolution it will support. Generally, the maximum resolution of the graphics card is higher than the maximum resolution of the monitor, so the resolution only needs to be set to the maximum resolution supported by the monitor. 3. For LCD displays, the maximum resolution given is the best resolution. The larger the display, the greater the optimal resolution. The greater the resolution, the requirements for graphics card configuration.

1. Win11 does not have very high requirements for the motherboard. You can first download healthcheck or whynotwin11 to check whether your other hardware devices support it (you can download it from this site). 2. If other conditions are met and only tpm does not meet the requirements, you can enable tpm in the bios settings. 3. Restart the system, and then press [DEL] on the keyboard to enter the BIOS settings when the logo pops up. 4. Enter the [Settings] option and [Miscellaneous] option in sequence. 5. Find [Intel Platform Trust Technology (PTT)] below and set it to [Start]. 6. If it is an AMD platform, then

What should I do if the laptop power-on indicator light comes on and the screen goes black? It may be caused by poor contact. It is recommended to restart the laptop. If the problem still cannot be solved, the monitor is broken and it is recommended to go to a repair shop for repair. When the notebook is turned on, the screen is black, but there is sound entering the system, and the external monitor is still abnormal. It may be a problem with the graphics card or motherboard. Just remove and replace it. Start switch problem. Black screen when booting, no self-test. Use the meter pin to short-circuit the startup terminal on the motherboard, and it will start normally. Memory stick problem. There will be a long beep when the screen is black when the phone is turned on. Just take out the memory stick, clean it and then plug it back in. cpu problem. It is recommended to use an external monitor of the computer, which is a general desktop monitor, and connect it to the external display interface of the notebook. If a

What to do if the computer desktop is upside down 1. The computer screen can be restored upside down by the following methods: Use keyboard shortcuts: You can use shortcut keys (such as Ctrl+Alt+Down Arrow) to rotate the screen, and use the same key again if necessary shortcut key to restore normal view. 2. First, right-click a blank space on the desktop, and then select from the pop-up options. Next, click on the selected icon several times to turn the fallen desktop into an upright position. Method 2 is also to right-click the mouse button and select this time. 3. The computer screen is turned upside down. First, right-click the mouse on the computer desktop and select the screen resolution menu. In the screen resolution menu that opens, click the drop-down menu of the orientation setting. At this time, select the horizontal menu option. After the screen orientation is set, finally click
