The ASUS b85pro gamer motherboard was out of power and had to be repaired for warranty. When removing the board, the pins were broken. It cost 80 to replace the base. Warranty Card?

php Editor Banana ASUS b85pro gamer motherboard is not receiving power, so I went to the joint warranty, and the pins were broken when disassembling the board. It cost 80 yuan to replace the base. Regarding the warranty card issue, please see below for details.

Asus b85pro gamer motherboard was not powered on and went to warranty. The pins were broken when removing the board. It cost 80 to replace the base. Warranty Card?

Try replacing the real-time crystal oscillator. If it doesn't work, replace the two chip capacitors (resonant capacitors) next to the real-time crystal oscillator. If it still doesn't work.

Finally, the BGA was replaced with the south bridge

How much does it cost to replace the base of the ASUS motherboard?

It is good to go to a place that specializes in motherboard repair to replace the base, but your own motherboard is within the warranty period. It is better to go to the manufacturer to replace it with a new one. The computer store will charge you 100 yuan, and you will pay 10 yuan for shipping, that is His store purchases the goods from the dealer, and then gives all the money to the dealer. After looking at it, the dealer spends 10 yuan to sell it to the manufacturer, leaving only 80 yuan. Because your motherboard is damaged, you need to pay extra to replace the base. The additional charge is usually around 70 yuan. Foxconn and Asus are not the same brand, so Asus may be more expensive. 80 yuan is generally normal. Generally, anti-factory electronic cities do not make money from you, but the manufacturers make money.

ASUS motherboard has bent pins, does it cost money to repair?

Hello! Does it cost money to repair an Asus motherboard if the pins are bent?

First of all, has the warranty period of the motherboard you bought expired? Secondly, you need to pay labor fees for repairs after the warranty period. In fact, I recommend that you replace the motherboard with a new one. Repairs will incur shipping costs and repairs are very slow. Buy a new motherboard. Nowadays, motherboards are not very expensive, especially Asus motherboards, as long as they are not high-end or mid-range. The low-end is basically very poor. It is recommended to buy Gigabyte for the mid-range and low-end.

Asus motherboard replacement CPU base problem, expert advice?

It is good to go to a place that specializes in motherboard repair to replace the base, but your own motherboard is within the warranty period. It is better to go to the manufacturer to replace it with a new one. The computer store will charge you 100 yuan, and you will pay 10 yuan for shipping, that is His store purchases the goods from the dealer, and then gives all the money to the dealer. After looking at it, the dealer spends 10 yuan to sell it to the manufacturer, leaving only 80 yuan. Because your motherboard is damaged, you need to pay extra to replace the base. The additional charge is usually around 70 yuan. Foxconn and Asus are not the same brand, so Asus may be more expensive. 80 yuan is generally normal. Generally, anti-factory electronic cities do not make money from you, but the manufacturers make money.

How to put the USB30 pullout base back on the ASUS motherboard?

To unplug the ASUS motherboard's USB 3.0 base and put it back in, you first need to confirm the direction and position of the socket on the base. Align the USB 3.0 plug with the base socket, push it in gently and press slightly until the plug is fully inserted. Make sure the plug fits perfectly into the socket on the base and is not loose. Be careful during installation to avoid damage caused by excessive force.

After the installation is completed, you can gently pull the plug to confirm that it is firmly installed on the base.

How to remove the base of ASUS mx239 monitor?

The method to remove the base of ASUS MX239 monitor is as follows: 1. First, turn off the monitor and disconnect the power cord and other cables to ensure safe operation. 2. Turn the monitor upside down with its back facing up so the base is easily accessible. 3. The base is usually fixed to the monitor by fixing screws or buckles. Use an appropriate tool, such as a screwdriver or plastic buckle release tool, to loosen the screw or buckle. 4. Once the screws or buckles are loosened, you can gently remove the base. It is worth mentioning that before operation, it is recommended to check the user manual of the ASUS MX239 monitor or refer to the official support document for more detailed guidance and precautions.

The above is the detailed content of The ASUS b85pro gamer motherboard was out of power and had to be repaired for warranty. When removing the board, the pins were broken. It cost 80 to replace the base. Warranty Card?. For more information, please follow other related articles on the PHP Chinese website!