How to set up hard disk boot in bios

Title: BIOS Setup Guide: How to set up the hard disk to start

Introduction:
In the computer startup process, BIOS plays a key role. BIOS (Basic Input/Output System) is a boot program solidified on the computer motherboard. It initializes the computer and provides basic input/output functions. In the BIOS, we can make various settings, including hard disk boot settings. This article will provide you with steps and guidelines on how to set up hard drive boot in BIOS.

1. Know your computer model and BIOS version
Before starting the setup, you need to know your computer model and BIOS version. This information can usually be found on your computer's motherboard, or you can enter the BIOS setup menu by turning on your computer and pressing a specific key (usually the DEL, F2, F10, or ESC key) and then find it in the BIOS Information or About page .

2. Enter the BIOS setup menu

1. Turn off the computer and restart it. During the restart process, press the button to enter the BIOS setup menu. This key is usually the DEL, F2, F10 or ESC key. If you're not sure which key you're pressing, watch the on-screen prompts closely as your computer starts.
2. Once you enter the BIOS setup menu, you will see an interface with various options. Use the directional keys on your keyboard (usually the up, down, left and right arrow keys) to navigate to Startup, Startup Sequence, or similar options.

3. Set the hard disk boot sequence

1. After entering the "Boot" or "Boot Sequence" option, you will see a list showing the current boot device sequence. This list is usually represented by numbers or letters.
2. Use the plus or minus keys on your keyboard to move the hard drive (usually labeled HDD or Hard Drive) to the top of the list or to the desired location. Note that some BIOSes may use keystrokes (such as the F5 or F6 keys) to move the boot sequence.
3. Once you have moved the hard drive to the desired location, press the corresponding key to save the settings and exit the BIOS (usually the F10 key). Before saving your settings, be sure to double-check your settings so you don't inadvertently change other important configurations.

4. Restart the computer
After completion, you can restart the computer and let the BIOS apply your new settings. The computer will try to boot according to the hard drive boot sequence you set in the BIOS. If the hard drive boot settings are correct, the computer will load the operating system from the hard drive and start.

Note:

1. Please be careful when making changes in BIOS settings. Incorrect settings can cause the computer to not start or other problems.
2. Make sure you know your computer model and BIOS version. The BIOS setup interface may vary depending on the computer model and BIOS version.
3. If you are unfamiliar with BIOS setup, it is recommended to consult your computer's user manual or contact your computer manufacturer's technical support before proceeding with setup.

Conclusion:
Through BIOS settings, you can easily adjust the computer's hard drive boot order. Knowing your computer model and BIOS version is the first step to getting started with setup. Then, navigate to the Boot or Boot Order option in the BIOS setup menu and move the hard drive to the desired location. Finally, save the settings and restart your computer. By setting up the hard drive boot sequence correctly, you can ensure that your computer loads the operating system from the hard drive and starts efficiently.

The above is the detailed content of How to set up hard disk boot in bios. For more information, please follow other related articles on the PHP Chinese website!