How to set boot order in BIOS
How to start the computer after entering the BIOS
When we encounter computer startup problems, in many cases we need to enter the BIOS (Basic Input/Output System, Basic Input/Output System) to make some settings and adjustments . BIOS is a firmware program embedded on the computer motherboard. It is a key component of the computer system startup. In the BIOS, we can set and adjust the hardware, including boot sequence, clock frequency, temperature monitoring, etc. This article will introduce how to enter the BIOS and how to set startup options in the BIOS to solve computer startup problems.
1. How to enter the BIOS
The method of entering the BIOS varies depending on the computer brand and model. Here are several common methods for reference.
- Press the DEL, F2 or F10 key
The BIOS setting interface of most desktop computers and some laptops can be accessed by pressing DEL (Delete), F2 or F10 key to enter. When turning on the phone, there may be a prompt at the bottom of the screen telling you which key to press. It should be noted that different brands and models of computers may use different buttons, so it is best to consult the computer's user manual or search for relevant information online before turning on the computer.
- Using shortcut key combinations
Some laptops and some brands of desktop computers can enter the BIOS by using specific shortcut key combinations. For example, some brands of laptops can press the FN F2 or FN ESC keys to enter the BIOS. Again, the correct shortcut key combination needs to be determined based on your specific computer make and model.
- Through the Windows operating system
In some cases, we can enter the BIOS through the Windows operating system. In Windows 10, you can click the "Start" button, select the "Power" icon, and then hold down the "Shift" key while clicking the "Restart" option. Then, select "Troubleshooting" > "Advanced Options" > "UEFI Firmware Settings" in the pop-up menu to enter the BIOS.
2. Set startup options
After successfully entering the BIOS, we can adjust some settings to solve computer startup problems. One of the most common problems is that the computer cannot boot from the correct boot device.
- Boot sequence setting
The startup sequence setting determines which device the computer first looks for to start the system when it is turned on. In the BIOS, you can find an option called "Boot" or "Startup", through which you can set the boot sequence. Common boot devices include hard drives, optical drives, and USB devices. We can change the boot order by moving the order of devices to ensure that the correct boot device is recognized first.
- Restore default settings
Sometimes, we may adjust some BIOS settings but forget the specific adjustment content, causing the computer to fail to start normally. At this time, we can find an option called "Load Defaults" or "Restore Default Settings" in the BIOS to restore the BIOS to factory settings. This will ensure that the startup options are restored to their normal state and thus resolve the startup issue.
- Confirm hardware connection
In addition to starting device settings, sometimes the computer cannot start because the hardware connection is unstable. In the BIOS, we can find an option called "Advanced" or "Advanced" through which we can view the connection status of the hardware. We need to confirm that hard drives, memory modules, and other components are properly connected and identified.
Summary:
Entering the BIOS and setting the correct startup options can help us solve computer startup problems. We can enter the BIOS interface by pressing specific keys or using shortcut key combinations. In the BIOS, we can adjust the boot sequence, restore default settings, and check hardware connections to solve various boot problems. It should be noted that before making any BIOS settings, we must carefully read the computer's user manual or search for relevant information to ensure correct operation and avoid unnecessary damage.
The above is the detailed content of How to set boot order in BIOS. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
1386
52
When I turn on the computer, it always stops at the motherboard logo screen. Nothing happens when I press anything, and I can't enter the bios?
Apr 23, 2024 am 09:13 AM
When I turn on the computer, it always stops at the motherboard logo screen. Nothing happens when I press anything, and I can't enter the bios? This is usually because the BIOS battery voltage is too low, and the system time has returned to the BIOS preset time, such as 2000.1.1, 00:00. You can use it after pressing F1 to enter the bios and set the time. Do not turn off the AC power after shutting down at night. Generally, the system time will not be lost when you turn on the computer the next day, and you can still enter the system normally. If the AC power is cut off, the battery voltage cannot sustain the power consumption of the bios, and the computer will be in the same state again the next day when it is turned on. Replacing the bios battery is the ultimate solution. Win11 is stuck on the motherboard logo interface when booting? 1. It is a problem with bios settings. We only need to find the corresponding setting items.
In which folder is the win10 graphics card driver located?
Apr 18, 2024 am 09:20 AM
What is the installation path of the graphics card driver? 1. Turn on the computer, click Computer, and open the Device Manager. For all devices on our computer, find the installation directory location of the graphics card driver. Click on the display adapter, find the device to which the driver belongs, and click to select properties. After entering properties, select Update Driver. 2. The graphics card driver is best installed on the C drive. By default, some drives are installed on the system disk. Cannot make selection. If you want to choose, you can install it on other disks. It is better to divide the hard disk into multiple areas than one area. The access speed through the C drive is faster than the D drive, and the access speed through the D drive is faster than the E drive. 3. It cannot be changed otherwise problems will occur. The driver is installed in C:\ProgramFiles, and C:\WINDOW
How to enter bios on hp motherboard
May 04, 2024 pm 09:01 PM
How to set up the U disk boot in the HP notebook bios (how to enter the HP computer bios) and then insert the U disk to be booted first into the USB port of the notebook. If you want to install the system, the system program must have been prepared in the U disk. First, open the laptop. Make sure the laptop is turned off. Setting the bios must be done with the computer turned off. Then insert the U disk that you want to boot first into the USB port of the notebook. If you want to install the system, the prerequisite is that the system program has been prepared in the U disk. Take the HP ProDesk400G5SFF desktop computer as an example. Set the BIOS disk startup method: First, restart the computer and wait for the startup screen to appear. There are two ways to set up USB disk startup on HP notebooks. One is to directly press the shortcut key to select
Tutorial on assembling a computer and installing a system? How to install win11 system when assembling a computer?
Apr 27, 2024 pm 03:38 PM
Tutorial on assembling a computer and installing a system? Nowadays, the system installation for assembling computers is very simple and convenient, and only requires a CD. First enter the bios settings, set the computer to boot first with the CD-ROM drive, then restart the computer and load the system CD into the CD-ROM drive. The CD will automatically enter the installation state. At this time, you only need to manually repartition the partitions, and the rest will be completed automatically. How to install win11 system when assembling a computer? 1. First, we need to download a win11 image file from this site before installing it. 2. The win11 image file has undergone a large number of professional tests to ensure stable installation and smooth operation. 3. After the download is completed, load the folder in the download path and run the "windowssetup" process in it.
MSI motherboard boot logo
May 08, 2024 pm 02:20 PM
How to cancel the MSI motherboard icon when booting 1. Press the DEL key when booting to enter the BIOS. Generally, in the "Advanced Features" item, you can find the words MSI motherboard LOGO screen. Select DISABLED, save and exit. There will no longer be this MSI motherboard LOGO screen when you turn on the computer in the future. MSI motherboard refers to the motherboard brand developed by MSI (MSI Technology Company). 2. The logo displayed when the computer is turned on is basically that of the motherboard manufacturer. You can set QUICKPOST to DISENABLE in the BIOS, so that the logo will generally no longer be displayed. It will display computer configuration-related information and give you more details. 3. First, teach you how to flash the BIOS in Windows environment. First: Go online
How to enter bios after assembling a computer? How to enter bios when assembling a computer?
May 07, 2024 am 09:13 AM
How to enter bios after assembling a computer? Before entering the BIOS, you need to make sure that the computer is completely shut down and powered off. Here are several common ways to enter the BIOS: 1. Use shortcut keys: Most computer manufacturers will display a prompt message at startup telling you which key to press to enter the BIOS settings. Usually the F2, F10, F12 or Delete key. After pressing the appropriate keys, you should be able to see a screen with information about your computer's hardware and BIOS settings. 2. Use the button on the motherboard: Some computer motherboards have a dedicated button for entering BIOS settings. This button is usually labeled "BIOS" or "UEFI". After pressing the button you should be able to see
How to solve the problem of notebook CPU frequency reduction
Apr 14, 2024 pm 09:04 PM
Notebook computer frequency reduction method 1. Open the control panel on the computer desktop. Click Power Options in Control Panel. Change the power plan in Power Options to Energy Saving. After changing to energy saving, you can see in the task manager that the notebook CPU operating frequency has been reduced. 2. The heat dissipation function is realized simply through the physical thermal conduction principle. Place a plastic or metal cooling base on the bottom of your notebook and raise it to promote air circulation and heat radiation, which can achieve cooling effects. Install several cooling fans on the heat dissipation base to improve heat dissipation performance. 3. When no program is running, the CPU automatically reduces the frequency to save power; when the CPU temperature or the operating environment temperature is too high, the CPU automatically reduces the frequency to prevent burning. You can also try the suggestions from friends on the first floor. Please refer to the setting method.
How to upgrade Gigabyte motherboard to Win11_How to upgrade Gigabyte motherboard to Win11
May 06, 2024 pm 12:04 PM
1. Win11 does not have very high requirements for the motherboard. You can first download healthcheck or whynotwin11 to check whether your other hardware devices support it (you can download it from this site). 2. If other conditions are met and only tpm does not meet the requirements, you can enable tpm in the bios settings. 3. Restart the system, and then press [DEL] on the keyboard to enter the BIOS settings when the logo pops up. 4. Enter the [Settings] option and [Miscellaneous] option in sequence. 5. Find [Intel Platform Trust Technology (PTT)] below and set it to [Start]. 6. If it is an AMD platform, then
