After pressing the power button on Xiaomi laptop, there is no response and the screen goes black. One of the reasons why the computer cannot be started is that the battery cannot be turned on due to battery startup protection. The solution is to disassemble the phone. When disassembling, pay attention to the screws under the rubber pad in the middle of the back case. When disassembling the machine, use rockers to lift up the surroundings. Be careful when removing USB and other interfaces, as they are prone to deformation.
The reason why Xiaomi laptop cannot be turned on: The battery is damaged, the motherboard is damaged, there is a problem with the CPU or graphics card, which may cause it to fail to turn on. Remove the battery and unplug the power plug.
Check whether the laptop has power. It cannot be turned on without power. For static electricity protection, press and hold to turn off the phone, unplug the power, leave it for two hours, and wait for the static electricity to dissipate before turning it on. There is a problem with the operating system. It is recommended to back up the data, boot with the original system disk (a USB flash drive is sufficient), and reinstall the system.
Check whether there is any dirt on the battery interface and the power cord plug. If there is any dirt, it is due to the dirt that the power supply is blocked. Take out the battery or unplug the plug and wipe it with a clean cloth. Wipe and then turn on the power. Use the laptop's battery and external power cord for power supply respectively.
"The screen of Xiaomi notebook computer is black and cannot be turned on. First, check whether the power button is still on. If it is on, you can shake the mouse or tap the keyboard keys first to see if the screen display is automatically turned off due to no operation for a long time. .
If your Xiaomi computer cannot be turned on normally, you can try the following methods to force it to turn on: Restart the computer: Press and hold the power button for a few seconds. Wait until the computer shuts down. Then wait a few seconds before pressing the power button to start the computer. This simple restart process may solve some temporary problems.
Check the battery connector and the power cord plug for dirt , if there is, it is due to these dirt that the power supply is blocked. Take out the battery or unplug the plug, wipe it with a clean cloth and then connect the power supply. Use the notebook battery and external power cord for power supply respectively.
After pressing the power button on the Xiaomi notebook, there is no response and a black screen. One of the reasons why the computer cannot be started is that the battery cannot be turned on due to battery startup protection. The solution is to disassemble the machine. When disassembling, pay attention to the rubber pad in the middle of the back case. There are also screws at the bottom. When disassembling the machine, use rockers to lift it up. Be careful when removing USB and other interfaces, as they are easy to deform.
You can go to a friend or go to a computer repair shop or sales store to find a power supply of the same model to try. .After re-plugging the power supply, press the power button again. If it still cannot turn on, press it for a while.
The reason why Xiaomi Notebook 16 cannot be turned on: Check whether the notebook has power. If there is no power, it cannot be turned on. . For electrostatic protection, press and hold to shut down, unplug the power, and leave it for two hours until the static electricity dissipates before you can turn it on. If there is a problem with the operating system, it is recommended to back up the data and use the original system disk (U disk is enough) to boot.
Try to turn on the computer. If it turns on normally, it is just caused by an abnormal motherboard BIOS. Unplug the power cord, remove the battery, open the back cover of the memory, plug and unplug the memory, wipe the gold finger part with an eraser, and re-insert it tightly (do not reverse the ). If none of the above operations can solve the problem, it is recommended that the notebook be sent to a repair center for testing.
Power supply problem: The failure of the Xiaomi computer to start may be due to a power failure or power supply Caused by insufficient supply. You can try to replace the power plug or power adapter, or try to connect an external power adapter to provide additional power supply. Hardware failure: Xiaomi computer hardware failure may also cause it to fail to start.
Xiaomi Notebook Press After pressing the power button, there is no response and a black screen. One of the reasons why the computer cannot be started is that the battery cannot be turned on due to battery activation protection. The solution is to disassemble the machine. When disassembling, pay attention to the screws under the rubber pad in the middle of the back case. When disassembling the machine, there are screws around it. Use a rocker to lift it up. Be careful when removing USB and other interfaces, as they are easily deformed.
Check whether there is dirt on the battery interface and the power cord plug. If so, it is because of these dirt that the power supply is blocked. If it is blocked, take out the battery or unplug it, wipe it with a clean cloth and then connect it to the power supply. Use the notebook battery and external power cord for power supply respectively.
Xiaomi notebook air12 does not turn on. You can enter bios. You can try to restart or restore factory settings to turn on, or you can apply for after-sales service. After pressing the power button, check whether the power indicator light is on. If it is not on, please insert the original charger and click the power button again; or press and hold the power button for 15 seconds and try again.
The reason why the laptop cannot turn on and the solution: The laptop power supply is insufficient. This situation is caused by excessive use of the notebook or excessive battery consumption on standby for a long time. As long as you charge it more before use, this problem will be solved. Nothing happens when booting.
1. Power supply problem: The failure of Xiaomi computer to start may be caused by power failure or insufficient power supply. You can try changing the power plug or power adapter, or try connecting an external power adapter to provide additional power. Hardware failure: Xiaomi computer hardware failure may also cause it to fail to start.
2. Reasons why Xiaomi laptop cannot be turned on: The battery is damaged, the motherboard is damaged, there is a problem with the CPU or graphics card, which may cause the computer to fail to turn on. Remove the battery and unplug the power plug.
3. Reasons and solutions for why the laptop cannot be turned on: The laptop power supply is insufficient. This situation is caused by excessive use of the notebook or excessive battery consumption on standby for a long time. As long as you charge it more before use, this problem will be solved. Nothing happens when booting.
First, we need to check the connection between the computer monitor and the host computer Do a comprehensive inspection and re-plug all the connections to see if there are any connection problems.
The methods are as follows: Method 1: Double clear by entering recovery mode. When the phone is turned off, press and hold the power button and volume button at the same time. After the screen lights up, release the buttons and wait to enter recovery mode.
When Win10 cannot enter the desktop after updating, the most effective solution is to enter the "System Menu" interface and repair it through the "Safe Mode" or "Return to the Previous System" method.
Solution: Replace the power supply with a higher power. Memory oxidation or other problems. If the gold fingers of the memory are oxidized and blackened, resulting in poor contact, the hard disk files cannot be read into the memory when the system is started, which will cause the system to fail to start and restart indefinitely. Solution: Use an eraser to clean the gold finger of the memory stick and insert it firmly.
The above is the detailed content of Xiaomi notebook cannot start normally. For more information, please follow other related articles on the PHP Chinese website!