1. First check the memory types supported by your motherboard to avoid buying the wrong memory. Try to buy memory of the same brand, model, frequency, and capacity to avoid incompatibility. Before installation, it is best to wash your hands to remove static electricity from your body to prevent static electricity from damaging memory or other hardware.
2. The recommended method is to have two 4G slots close to the CPU blue slot and two black slots, and two 2G slots each far away from the CPU blue slot and black slot, forming a 6Gx2 dual channel. Below: Similarly, two memory sticks inserted into the two blue memory slots can form a dual channel, and two or more larger memory sticks are inserted into the memory slots near the CPU.
3. This is the correct way to insert a memory stick. The memory stick is inserted into the computer motherboard, in the memory slot next to the CPU, usually two or four slots side by side. The notebook can have up to two card slots, and they can be inserted into the card slots as there are only two.
4. First, pull the plastic clips (usually called "safety pins") on both sides of the memory slot where the memory needs to be installed to the outside so that the memory module can be inserted, as shown in Figure 1. .
5. Insert the memory stick: First determine the front and back sides. There is a small opening (notch) on the memory stick. Just line up this little opening with the bump on the memory module socket. After the small opening is aligned with the protrusion, the memory module can be inserted.
Take a computer as an example. The method of installing dual-channel memory on a computer is as follows: Prepare 2 memory sticks and install them into the motherboard memory slot. Yes, 4 memory slots are provided, and dual-channel memory can be installed directly on the small motherboard. If it is a large motherboard, it provides 4 memory slots. To install a dual-channel memory module, you only need to select two of the memory slots.
The recommended method is to have two 4G slots close to the CPU blue slot and two black slots, and two 2G slots far away from the CPU blue slot and black slot, forming a 6Gx2 dual channel. Below: Similarly, two memory sticks inserted into the two blue memory slots can form a dual channel, and two or more larger memory sticks are inserted into the memory slots near the CPU.
If you want to set up a dual channel, the memory needs to be inserted into the memory slots of the same color. For example, two memories of the same capacity and type must be inserted into DIMM1 and DIMM3 or DIMM2 and DIMM4 respectively to successfully set up. In a real The motherboard is also distinguished by color.
The method of building dual-channel memory is also very simple. We only need to insert the memory into the memory slots numbered "1 and 3 memory slots" or "2 and 4 memory slots" to complete the construction of dual-channel memory. 1 memory stick, inserted into slot 2, single channel memory. Another memory stick is inserted into slot 4 to form a dual-channel memory.
Question 1: How to form dual-channel memory Dual-channel: Dual-channel requires 2 memories of the same size and capacity brand (preferably the same batch), and the motherboard of the same slot is inserted into 1-3 or 2- 4,3 slots plug into 1-2 or 1-3. (i.e. not the same color slot).
As shown in the figure below: If you want to set up dual channels, the memory needs to be inserted into the memory slots of the same color. For example, two memories of the same capacity and type must be inserted into DIMM1 and DIMM3 or DIMM2 and DIMM4 respectively. Success, the real motherboard is also distinguished by color.
The computer memory stick is usually installed in the memory slot of the computer motherboard. The location is: Usage Tips: If the memory exceeds 4G, it is generally necessary to change to a 64-bit system. The 32-bit system supports a maximum use of 4G memory. If the memory exceeds 4G, it will be wasted.
Use a screwdriver to open the chassis cover of the desktop host. The red circle on the way is the memory module. Memory is the bridge in the computer, responsible for data exchange between the processor and hardware such as hard drives, motherboards, and graphics cards. The red circle on the way is the memory stick, which is next to the CPU fan and plugged into the memory stick.
The computer memory module is located on the motherboard. When taking out the memory module, you need to open the buckle of the memory module, and then take out the memory module. If it is a dual-channel memory, the motherboard will generally indicate that the second and second channels should be used first. The fourth memory slot. The memory module slot has a fool-proof design. Installing the memory module is the main fool-proof interface to avoid incorrect insertion.
The memory module of a desktop computer is generally installed on the motherboard, next to the CPU socket on the motherboard.
The computer memory module is on the motherboard. For desktop computers, the memory module is placed vertically to the motherboard. Each laptop model is different, and the location of the memory is also different. Laptop memory modules are basically placed at the bottom of the laptop or under the keyboard.
Use a screwdriver to open the chassis cover of the desktop host. The red circle on the way is the memory module. Memory is the bridge in the computer, responsible for data exchange between the processor and hardware such as hard disk, motherboard, and graphics card. The red circle on the way is the memory stick, which is next to the CPU fan and plugged into the memory stick.
First of all, before adding a memory module to the laptop, you need to remove the battery. Turn on the right battery lock switch on the back, push the left battery lock to the left (keep it still), and then remove the battery.
Align the notch on the memory stick with the notch on the motherboard slot, and then insert the memory stick vertically into the slot. After inserting it, close the switch of the slot, so that the computer's memory stick is inserted into the slot. alright. The memory stick is a computer component that the CPU can address through the bus and perform read and write operations.
First cut off the power and open the chassis cover. The four vertical slots on the right side of the CPU slot are memory slots, arranged 1234 from left to right, and slot 4 has a higher priority than slot 3. There is a latch next to the memory module slot, which can be opened with just a slight pull.
Notebooks, all-in-one computers or small consoles are limited in size. It is possible that only 2 or 1 memory sticks can be inserted, or even the memory is solidified on the motherboard. , you cannot insert additional memory modules.
There are 2 memory slots, and you can definitely install 2 memory slots. But if you want to expand the memory, you must first find out what memory your motherboard supports. Nowadays, DDR3 memory is generally used. (Paired in the past 3 to 4 years).
How many memory sticks can be inserted into the computer depends on how many memory slots there are on the motherboard. Two slots can be used to insert 2, or four slots. Insert two according to the color, or press 3 , 4, staggered.
OK. Currently, most motherboards on the market have one memory slot reserved, that is, two memory slots, which can support the insertion of two memory modules at the same time.
The steps to install a memory module in a notebook are as follows: First, determine whether the model of the memory slot in the notebook host matches the model of the memory. If you don't know the model, you can directly check the location of the gap between the slot and the memory. . Then, before you prepare to insert the memory, first pull out the latches at both ends of the memory slot.
The same desktop computer cannot install two memory modules of different models at the same time. Memory modules of the same model with different frequencies can be installed at the same time. The main function of a computer memory stick is to temporarily store the calculation data of the CPU and the data exchanged with external memories such as hard drives.
1. First, move the plastic clips (usually also called "safety pins") on both sides of the memory slot corresponding to the memory to be installed to the outside. Pull it so that the memory module can be inserted, as shown in Figure 1.
2. There is a bump on the slot of the computer memory module, and there is a gap at the corresponding position of the gold finger of the memory module. This gap is not in the middle, so if it is inserted backwards, it will not go in.
3. This operation takes a Dell computer as an example. The specific steps are as follows: Method 1: Directly insert the thick inner strip. If you feel that it cannot be inserted, then change the direction. If it is inserted backwards, it must not be inserted. Got in.
4. After opening the computer cover, find the spare location of the memory module, and then pull apart the two sides of the slot that fixes the memory module so that the memory module can be inserted vertically. After inserting the memory stick vertically into the slot, make sure the memory stick is indeed inserted into the card slot. Generally speaking, there will be a click when the memory module is inserted, and then the switches on both sides are closed.
5. The front and back sides of the memory module look very different in appearance. The most important thing is that the positions of the card slots are different, one is to the left and the other is to the right. When installing a memory module, you should also pay attention to whether the memory module is compatible with the computer motherboard model, otherwise the installation will not work properly.
The above is the detailed content of How to insert two memory sticks in the computer. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
