What to do if the usb device is not recognized
Solutions to unrecognized USB devices: 1. Check USB devices and connections; 2. Update drivers; 3. Check power management settings; 4. Check device compatibility; 5. Uninstall and reinstall USB device; 6. Check for system updates; 7. Use other computers to test; 8. Check the USB device firmware; 9. Contact the device manufacturer; 10. Consider hardware failure.
Unrecognized USB device is a common problem that can be caused by many reasons.
1. Check the USB device and connection
First, make sure the USB device is not physically damaged and the connection is normal. You can try plugging the USB device into another USB port on your computer to rule out the possibility of a damaged port. At the same time, check whether the driver of the USB device has been installed correctly.
2. Update the driver
If the USB device driver is outdated or damaged, the device may not be recognized. You can update the driver through the following steps:
Open "Device Manager": In Windows system, press the "Win X" key combination and select "Device Manager".
Expand the "Universal Serial Bus Controller" option: In Device Manager, find and expand the "Universal Serial Bus Controller" option.
Update driver: Right-click the relevant USB device and select "Update Driver". Follow the wizard prompts to update the driver.
If the above method cannot solve the problem, you can try to use third-party software such as Driver Life to detect and update the driver.
3. Check the power management settings
Sometimes, the power management settings may prevent the USB device from being recognized correctly. You can check and modify the power management settings through the following steps:
Open "Device Manager": Also press the "Win X" key combination and select "Device Manager".
Expand the "Universal Serial Bus Controller" option: In Device Manager, find and expand the "Universal Serial Bus Controller" option.
Modify power management settings: Right-click "USB Root Hub" and select "Properties". Under the "Power Management" tab, uncheck "Allow the computer to turn off this device to save power."
4. Check device compatibility
Some USB devices may be incompatible with the computer or operating system, resulting in unrecognizability. In this case, you can try to check the system requirements of your device and make sure that your computer or operating system meets these requirements. If a device is incompatible with your computer or operating system, it may be necessary to replace the device or update the operating system.
5. Uninstall and reinstall the USB device
If none of the above methods can solve the problem, you can try to uninstall and reinstall the USB device. The specific steps are as follows:
Open "Device Manager": Press the "Win X" key combination and select "Device Manager".
Expand the "Universal Serial Bus Controller" option: In Device Manager, find and expand the "Universal Serial Bus Controller" option.
Uninstall USB device: Right-click the relevant USB device and select "Uninstall Device". Follow the prompts to complete the uninstallation operation.
Restart the computer: After uninstalling the device, restart the computer. The computer will automatically detect and reinstall the USB device.
6. Check system updates
Make sure that the operating system and related drivers are the latest versions. Sometimes, system updates can fix issues related to USB devices.
7. Test using other computers
If possible, try to plug the USB device into another computer to check whether the device can work normally on other computers. This helps determine whether the problem is related to a specific computer or operating system.
8. Check USB device firmware
If the USB device has updateable firmware, please check if there is an update available. Sometimes, updating the device firmware can resolve recognition-related issues.
9. Contact the device manufacturer
If none of the above methods can solve the problem, it is recommended to contact the manufacturer or technical support team of the USB device. They may be able to provide more specific solutions or suggestions.
10. Consider hardware failure
If the USB device still cannot be recognized after multiple attempts, there may be a hardware failure in the device itself. In this case, you may want to consider replacing the device or seeking professional repair services.
In conclusion, fixing the unrecognized USB device problem may require some patience and trying different methods. Most issues can be resolved by checking the device, drivers, power management settings, compatibility, etc., and trying to uninstall and reinstall the device or update the system. If the problem persists, it is recommended to seek professional help or consider replacing the device.
The above is the detailed content of What to do if the usb device is not recognized. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
AI Hentai Generator
Generate AI Hentai for free.
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
1378
52
What should I do if the Razer mouse driver cannot recognize the mouse?
May 06, 2024 pm 11:36 PM
Razer mouse drivers not recognized can be resolved by following these steps: check hardware connections, update drivers, reinstall drivers, check Windows settings, check for third-party software conflicts, run System File Checker (SFC) and reset Razer Snake Synapse. If the problem persists, the mouse hardware may be faulty, please contact Razer Support.
How to solve the problem that Ethernet does not have a valid IP configuration
Apr 24, 2024 pm 02:27 PM
To resolve the Ethernet without valid IP configuration issue, follow these steps: Check the physical connection and replace the cable. Check your network settings to make sure the IP address is obtained dynamically. Reset the Ethernet adapter. Refresh the DHCP lease. Update network drivers. If the problem persists, contact your ISP.
Can any graphics card be installed on the motherboard?
Apr 29, 2024 am 09:16 AM
Are all motherboards suitable for installing any independent graphics card? 90% of graphics cards and motherboards are compatible. The most important thing is the power supply. The more high-end graphics cards, the better the power supply specifications are. For example, use a 2060 graphics card. If the power supply is equipped with a 200W power supply, it will not match. It will be more comfortable to configure at least a 600W power supply. This configuration is a 4-core processor. The CPU is not very low, but the graphics card is only equipped with 9500GT. This is obviously an unreasonable combination of graphics cards. As long as you upgrade the graphics card, the performance of your computer will be greatly improved. In the case of corresponding interfaces, all motherboards are equipped with any independent graphics card, no. Can my graphics card be installed on the motherboard after I buy it? 1. Yes, the installation method is as follows: We must first determine whether the independent graphics card we purchased is compatible with our own.
How to solve werfault.exe application error win11
Apr 19, 2024 pm 05:12 PM
Solution: To resolve the Werfault.exe application error on Windows 11, you can try: Restart your computer Check for application updates Run System File Checker (SFC) Run Windows Memory Diagnostic Scan for malware Update drivers Contact the software vendor Reinstall if necessary Set up Windows 11
In which folder is the win10 graphics card driver located?
Apr 18, 2024 am 09:20 AM
What is the installation path of the graphics card driver? 1. Turn on the computer, click Computer, and open the Device Manager. For all devices on our computer, find the installation directory location of the graphics card driver. Click on the display adapter, find the device to which the driver belongs, and click to select properties. After entering properties, select Update Driver. 2. The graphics card driver is best installed on the C drive. By default, some drives are installed on the system disk. Cannot make selection. If you want to choose, you can install it on other disks. It is better to divide the hard disk into multiple areas than one area. The access speed through the C drive is faster than the D drive, and the access speed through the D drive is faster than the E drive. 3. It cannot be changed otherwise problems will occur. The driver is installed in C:\ProgramFiles, and C:\WINDOW
What should I do if the shortcut key for taking screenshots in Windows 11 doesn't work?
Apr 15, 2024 pm 01:45 PM
Solution to Win11 screenshot shortcut not working: Check keyboard function: Make sure the keyboard is connected and working properly. Restart your computer: A simple restart can solve many problems. Check the screenshot settings: Enable the "Take screenshot using PrtScn button" option. Run the keyboard troubleshooter: Detect and fix keyboard problems. Update keyboard driver: Update the driver to resolve compatibility issues. Re-register the screenshot shortcut key: Re-register the shortcut key through PowerShell command. Disable third-party screenshot tools: avoid conflicts with Windows screenshot functionality. Check for Windows Update: Install available updates to resolve errors or issues.
Solve the problem of being unable to access the Internet even though the broadband is connected (troubleshooting)
May 05, 2024 pm 06:01 PM
The Internet has become an indispensable part of people's lives in today's information age. But we can't get online, and sometimes we encounter some troubles. However, for example, the broadband is already connected. And take corresponding solution measures, we need to troubleshoot the problem step by step to restore the network connection in this case. Confirm the device connection status: Whether the mobile phone and other devices have been correctly connected to the broadband network, check the computer to ensure that the wireless network or wired network connection is normal. 2. Restart the broadband device: Reset the device and re-establish the connection, wait a few minutes and then turn it back on again. Try turning off the broadband router or modem. 3. Check the broadband account number and password: To avoid being unable to access the Internet due to incorrect account or password, make sure the broadband account number and password entered are correct. 4. Check D
What to do if win11 bluetooth cannot be used_win11 bluetooth cannot be connected how to deal with it
May 08, 2024 am 10:37 AM
1. First, we click the search button in the taskbar below, search and enter [Device Manager]. 2. Then find our Bluetooth device in the device manager, right-click to select it, and click [Update Driver]. 3. If the Bluetooth device cannot be found in the device manager, then we can download Master Lu and update the driver in it. Method 2: 1. First, we enter [Settings] through the start menu. 2. Find the [devices] device in the setting interface. 3. Then click the [Bluetooth] option, and then set the switch below to [On].