. Press Delete to enter the BIOS menu. First, find the ADvanced BIOS Features item on the main interface, go in and find AMD K8 Cool&Quiet control, and change auto to Disabled.
This motherboard has three versions: rev. 0, rev. 0, rev. 1. Only the last two versions can be used. Your motherboard BIOS is FJ. This version of BIOS is only available in rev 0 and 1, so the core can be enabled.
In BIOS - MB Intelligent Tweaker (M.I.T.) (frequency voltage control) - Advanced Clock Calibratioin, the first item after entering is Advanced Clock Calibration (advanced clock calibration function), this can be modified to: Auto Or All Cores, just save it.
The maximum CPU and graphics card supported for upgrade are as follows. 1: Gigabyte GA-MA770-UD3 supports the AM3 interface and can support the full range of Athlon II and Pterosaur II CPUs. 2: In terms of CPU, the performance of Wing Loong II is relatively stronger. The highest one is X6 1100T, with 6 cores and 6 threads, and a power consumption of 125W.
Can support GTX660, but the card has higher power consumption (135W at full load). Pay attention to whether the power supply is sufficient.
The workmanship and design of brands such as MSI, Zotac, and Gigabyte are the best; some models of Inzon, Colorful, GALAXY, Gengsheng, and Maxxuan among the channel brands are also available, and the price/performance ratio may be higher.
To upgrade the graphics card, you need to consider two aspects: 1. Motherboard 2. Power supply. The PCI-E interface of your motherboard is 0. Therefore, the highest supported N card is GPU: GT640. Card A is a GPU: 6850 model graphics card. Secondly, you didn't specify the model of your power supply. I analyzed that the original power supply would not be rated at 400W.
Recommended: GALAXY 9800GT Vice Admiral, Maxxuan 9800GT Big Mac 1G Edition; Sapphire HD4850 Poison, GALAXY GTS250 Admiral Edition, Zotac GTS250 1G First Edition, etc.
1. Log in to the Gigabyte official website homepage and enter the motherboard model in the search bar on the right. Then find the motherboard model in the list and click on it. Then select the "Support and Downloads" page and select "BIOS" in the "File Category". The page displays the current motherboard BIOS firmware version. The latest one is "F8", click to download.
2. Enter the BIOS and boot from the U disk to enter DOS. Enter Dir to view the BIOS file in the USB flash drive. Gigabyte Computer Illustration 4 2. Enter BACKUP to back up the BIOS and generate a BAK.ROM file in the USB flash drive.
3. Take the ASUS motherboard as an example: first determine the model of your motherboard, and then go to the motherboard's official website to download the BIOS files and tools needed to flash the BIOS. These files can be downloaded from the motherboard's official website. Open and run winflash, and follow the prompts to choose to obtain the BIOS from this machine.
4. First check the model and version of the motherboard BIOS. Download the CPU-Z software, and after running it, you can see your motherboard model and BIOS version in the "Motherboard" tab. Go to the official website to find the bios firmware of the same model.
5. It is very convenient to refresh the bios on Gigabyte motherboard. Download the @bios software directly from the Internet. Install it, open it directly, connect the computer to the Internet, and you can upgrade the bios under the Windows system.
1. After starting the computer, keep pressing the DEL key on the keyboard on the first screen, which is also the delete key. Then enter the BIOS interface. Click "BIOS Function" on the menu above to enter the "BIOS Function" setting interface. The first option "Select Boot Priority" is to set the boot sequence of the hard disk.
2. There are several reasons why you cannot enter the system after installing the m2 solid state drive: The SSD is not set as the first boot disk: After cloning the system to the SSD, if you cannot enter the system when you start the computer, it may be Forgot to change boot order. In this case, just enter the BIOS and change the boot sequence so that the computer boots from the SSD.
3. After the solid state drive is installed, there is a problem that the system cannot be entered. There is a problem with the system. Just change to a verified system disk and reinstall the system, so that the problem of system crash and inability to enter the desktop can be solved automatically and smoothly. You can use a USB flash drive or hard disk, and the installation speed is very fast.
4. Then start searching for PXE from the network driver - that means network boot. You need to enter bios and set the new SSD solid state drive as first. Things to note after installing a solid-state drive: After installing a new hard drive, the system must be installed before booting.
You must first buy the U that comes with 6 cores enabled. Then go into bios and change two settings. If you buy one that comes with 6 cores and L3 cache included, the 6MB L3 cache will be automatically enabled when the cores are turned on. Turn on the computer and press the DEL key several times at the same time to enter bios.
After the upgrade is completed, you will be prompted to reboot into the BIOS and load the optimization settings. As shown in the figure, reboot into the BIOS, click Load Optimized Defaults first, and then modify the BIOS, such as the startup sequence. In this way, the BIOS upgrade is completed.
Boot Device (set the first boot disk) sets the BIOS to search for the first boot device to load the operating system. The default setting is Floppy (floppy disk drive). It is recommended to set it to (HDD-0) after installing the system for normal use.
In the first screen of booting (during computer self-test), press the "Del" key to enter the "BIOS Setup Main Menu". Select "Load Optimized Defaults" in the BIOS setup main menu and press the "Enter" key.
Gigabyte motherboard boot: On the first screen of booting up (during computer self-test), press the "Del" key to enter the BIOS setup main menu. Select "MB Intelligent Tweaker (M.I.T.)" under the main menu of the BIOS settings and press the "Enter" key to enter.
The first item in Advanced BIOS Features is: Virtualization (virtualization technology), just change it to Enabled.
If Gigabyte GA770T-D3L can be installed with the best CPU, according to the support list on the official website, there are two types: The first situation: PCB is rev . 1 can support AMD FX series processors, such as: FX-6100, FX-8100, etc.
T-D3L adopts AM3 interface, 4 1-phase CPU power supply, and supports up to TDP 125W AM3 processor Phenom II x6 1100T.
Supported quad-core CPUs are: AMD Athlon II X4 640 and AMD Phenom II X4 945.
You can install CPUs with am3 interface, such as dual-core x240 245 250 and quad-core x4 640 x4 945.
This motherboard supports up to Phenom II X6 1100T with AM3 interface. Please refer to the support list on the official website.
The above is the detailed content of Gigabyte 770 motherboard. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
