Where to plug in the memory stick?-Hardware News-php.cn

Where to plug in the memory stick?

Where is the card slot of the computer memory module?

The computer memory module is located on the motherboard. When taking out the memory module, you need to open the memory module buckle and then remove it. Remove the memory module. If it is a dual-channel memory, the motherboard will generally indicate that the second and fourth memory module slots will be used first. The memory module slot has a fool-proof design. Installing the memory module is the main fool-proof interface to avoid incorrect insertion.

As shown in the red box in the figure below, it is the location of the memory card slot in the chassis.

Find the fixing screws on the computer chassis, unscrew them, and open the computer host. After opening the computer host, find the motherboard where the memory module is inserted, and turn on the fixed switches on both sides. After that, insert the memory card to be inserted into the groove, making sure it fits tightly and does not come loose.

Where is the computer memory module?

1. The computer memory module is on the motherboard. For desktop computers, the memory module is placed vertically to the motherboard. Each laptop model is different, and the location of the memory is also different. Laptop memory modules are basically placed at the bottom of the laptop or under the keyboard.

2. Use a screwdriver to open the chassis cover of the desktop host. The red circle on the way is the memory module. Memory is the bridge in the computer, responsible for data exchange between the processor and hardware such as hard drives, motherboards, and graphics cards. The red circle on the way is the memory stick, next to the CPU fan and plugged into the memory stick.

3. The memory module of a desktop computer is generally installed on the motherboard, next to the CPU socket of the motherboard. Small boards generally have two memory slots, which can accommodate two memory modules. Medium and large boards generally have four memory slots, which can accommodate four memory modules.

4. Computer memory modules are generally installed in the memory slot of the computer motherboard. The location is: Usage Tips: If the memory exceeds 4G, it is generally necessary to change to a 64-bit system. The 32-bit system supports a maximum use of 4G memory. If the memory exceeds 4G, it will be wasted.

5. Memory is the bridge in the computer, responsible for data exchange between the processor and hard disk, motherboard, graphics card and other hardware. The red circle on the way is the memory stick, which is next to the CPU fan and plugged into the memory stick. Look, a computer memory stick looks like this. Use a screwdriver to open the cover of the desktop computer. The red circle in the middle is the memory module.

Where is the computer's memory inserted?

1. Use a screwdriver to open the chassis cover of the desktop host. The red circle on the way is the memory stick. Memory is the bridge in the computer, responsible for data exchange between the processor and hardware such as hard disk, motherboard, and graphics card. The red circle on the way is the memory stick, which is next to the CPU fan and plugged into the memory stick.

2. The memory module of a desktop computer is generally installed on the motherboard, next to the CPU socket on the motherboard.

3. Computer memory modules are generally installed in the memory slot of the computer motherboard. The location is: Usage Tips: If the memory exceeds 4G, it is generally necessary to change to a 64-bit system. The 32-bit system supports a maximum use of 4G memory. If the memory exceeds 4G, it will be wasted.

4. The computer memory module is on the motherboard. For desktop computers, the memory module is placed vertically to the motherboard. Each laptop model is different, and the location of the memory is also different. Laptop memory modules are basically placed at the bottom of the laptop or under the keyboard.

5. The computer memory module is located on the motherboard. When taking out the memory module, you need to open the buckle of the memory module and then take out the memory module. If it is a dual-channel memory, the motherboard will generally indicate that the memory module should be used first. Second and fourth memory module slots. The memory module slot has a fool-proof design. Installing the memory module is the main fool-proof interface to avoid incorrect insertion.

6. Operation method: If the computer has a memory card slot, insert the memory card directly to use; if the computer does not have a memory card slot, you can purchase a card reader and insert the memory card into the card reader. , then insert the card reader into the USB interface of the computer and it can be used.

How to insert the memory stick

Align the notch on the memory stick with the notch on the motherboard slot, then insert the memory stick vertically into the slot, and then turn the switch of the slot Close the port so that the computer's memory module is inserted. The memory stick is a computer component that the CPU can address through the bus and perform read and write operations.

First, pull the plastic clips (commonly known as "safety pins") on both sides of the memory slot corresponding to the memory to be installed to the outside so that the memory module can be inserted, as shown in Figure 1.

Insert the memory stick: First determine the front and back sides. There is a small opening (notch) on the memory stick. Just line up this little opening with the bump on the memory module socket. After the small opening is aligned with the protrusion, the memory module can be inserted.

First determine whether the model of the memory slot in the computer host matches the model of the memory. If you don’t know the model number, just look at the location of the slots and memory gaps. Before inserting memory, first pull out the locks at both ends of the memory slot.

First cut off the power and open the chassis cover. The four vertical slots on the right side of the CPU slot are memory slots, arranged 1234 from left to right, and slot 4 has a higher priority than slot 3. There is a latch next to the memory module slot, which can be opened with just a slight pull.

The official recommendation is to insert DIMM_B2 first for a single memory and DIMM_BDIMM_A2 for two memories. Judging from the picture, the gray DIMM_B2 should be inserted first, as shown in the red number 1 slot in the picture below.

Where is the memory module of the computer?

1. Use a screwdriver to open the chassis cover of the desktop host. The red circle on the way is the memory module. Memory is the bridge in the computer, responsible for data exchange between the processor and hardware such as hard disk, motherboard, and graphics card. The red circle on the way is the memory stick, which is next to the CPU fan and plugged into the memory stick.

2. The memory module of a desktop computer is generally installed on the motherboard, next to the CPU socket of the motherboard. Small boards generally have two memory slots, which can accommodate two memory modules. Medium and large boards generally have four memory slots, which can accommodate four memory modules.

3. The computer memory module is on the motherboard. For desktop computers, the memory module is placed vertically to the motherboard. Each laptop model is different, and the location of the memory is also different. Laptop memory modules are basically placed at the bottom of the laptop or under the keyboard.

Which slot should the memory module be inserted into?

2. The memory module is inserted into slot 0 (the first slot) first. Memory stick (RandomAccessMemory, abbreviation: RAM), also known as random access memory, is an internal memory that directly exchanges data with the CPU. It is usually used as a temporary data storage medium for the operating system or other running programs.

4. As shown in the red box area in the figure below, it is the location of the memory card slot in the chassis.

5. On the SYS-FAN interface on the motherboard. The peripheral interfaces on the motherboard are mainly concentrated on the left side. Its functions are to issue instructions, receive information, convert, compile, etc. There are mouse and keyboard interfaces, display output interfaces (HDMI, DVI, VGA), USB interfaces, network cards, sound cards, etc.

The above is the detailed content of Where to plug in the memory stick?. For more information, please follow other related articles on the PHP Chinese website!