How to install hard drive in computer

How to add a hard disk to the computer

After installing the hard disk, start the computer and hold down the "Delete" key to enter the CMOS setting interface. At this time, select "IDE HDD Auto Detection" and press Enter to check whether the two hard drives are normal.

First press Win R to open the "Run" window, enter: Diskmgmt.msc, and click "OK" after inputting. After opening "Disk Management", you can expand the hard disk. If the "Unallocated" partition is not displayed, you cannot create a new partition or extend the partition.

The main setting method for adding a new hard drive to the computer is: install the hard drive on the computer, turn it on, select ‘’My Computer’’ on the computer desktop, and click ‘Manage’ to enter the computer management interface.

How to install a computer hard drive

1. The M.2 installation method is the same for desktop computers and laptops. The laptop needs to be disassembled. Here we mainly take the desktop computer as an example. First, we need to find the motherboard. For the M.2 slot, screw the copper stud to the third hole "2280 specification". Most M.2 solid-state drives are of the 2280 mainstream specification.

2. First, open the computer case, find the hard drive slot, and place the hard drive into it. Then, use screws to secure the mechanical hard drive to the chassis. After that, follow the power cord and find the big SATA interface. Then, plug this SATA interface into the corresponding interface on the hard disk.

3. After installing the hard disk to the computer, turn on the computer, select "My Computer" on the computer desktop, right-click - "Manage" to enter the computer management interface. Select "Disk Management", the system will pop up a new hard disk detected and ask to initialize the hard disk, as shown in the figure, click: "OK" to initialize.

How to install the computer hard drive

1. After installing the hard drive to the computer, turn on the computer. On the computer desktop, select My Computer and right-click - "Manage" to enter the computer management interface. Select "Disk Management", the system will pop up a new hard disk detected and ask to initialize the hard disk, as shown in the figure, click: "OK" to initialize.

2. Lay the computer case flat and then disassemble it (with the power supply turned off). Install the prepared hard drive on the hard drive rack. Connect the hard drive to the motherboard with a data cable, and plug in the power cord to the hard drive. Close the chassis. The hard disk installation is completed.

3. You open the case and find the hard drive. You can see that the hard drive is connected to a white, flat and wide data cable with several black sockets on it. Plug your hard drive into it. Recently, in the disk management of WIN, set the information of the new hard disk, such as partition, format, etc.

4. The hard disk is located on the host computer. disassembly. Use a Phillips screwdriver to unscrew the screw in the yellow *** area and pull it out. There are 2 on each side. Question 5: Step-by-step diagram of how to install a computer hard drive (1) A desktop computer can install two hard drives.

5. After opening the purchased hard drive, a SATA data cable will usually be included; open your chassis cover. First, connect the data cables from the motherboard SATA interface to the hard disk SATA interface, and connect the power cable. The flat end is connected to the hard drive, and the large end is connected to the power supply.

6. For computers that need to reinstall the hard disk, you can first follow the steps below: Enter the BIOS settings: Press the DEL key to enter the BIOS settings when booting, and adjust the boot order in the BOOT tab to start from the USB flash drive. Or start the DVD drive.

How to reinstall a computer with a hard drive

First prepare a 4G or above U disk. Then download a "U disk creation tool" online. After installation, double-click to open the creation tool, and the interface as shown will appear. Just follow the default options. Then enter the U disk creation process and wait for a moment. Once completed, you will be prompted whether to proceed with the test. You can exit directly with "No".

Insert the U disk, restart the computer and press FFF1Esc, etc. (There is a prompt on the startup screen. You can find your corresponding motherboard brand in the list below. If there is no motherboard brand below, please enter the U disk boot tutorial to find the relevant brand. computer shortcut keys).

The specific steps are as follows: Open the Xiaobai one-click reinstall system software, exit the anti-virus software, wait for the software to detect the local environment and then enter the main interface, then insert the U disk into the computer, click Make System, and start making the U disk boot disk .

Question 8: How to install a second hard drive on the computer? To install a new system, reinstall the operating system. Connect the old hard drive to the computer, set the new hard drive as boot in the bios, or set the old hard drive as slave, or connect the old hard drive to the second hard drive port.

Question 1: Is there a system in the newly purchased hard drive? How to install the system on a newly assembled computer? When the manufacturer leaves the factory, the hard drive is empty, without data and system. A newly assembled computer needs to be booted from a CD or USB flash drive and the hard drive must be partitioned. Then install the system.

Method steps: After installing the hard disk to the computer, turn on the computer. On the computer desktop, select My Computer and right-click - "Manage" to enter the computer management interface. Select "Disk Management", the system will pop up a new hard disk detected and ask to initialize the hard disk, as shown in the figure, click: "OK" to initialize.

The above is the detailed content of How to install hard drive in computer. For more information, please follow other related articles on the PHP Chinese website!