The notebook cannot enter the system interface
Laptop computer cannot enter the system desktop after booting up
1. System files are damaged: If the Windows system files are damaged, the computer may have repeated startup problems. You can try to use the Windows installation disk or system recovery partition to repair it. Software conflicts: Certain software installed on your computer may cause problems with your Windows system, resulting in repeated startups.
2. The reasons why the laptop cannot boot to the desktop are as follows: System files are damaged: If the Windows system files are damaged, the computer may have repeated startup problems. You can try to use the Windows installation disk or system recovery partition to repair it.
3. Reasons why the computer cannot enter the desktop system after it is turned on: startup sequence problems, hardware problems, and system file damage. Boot order problem In the BIOS, we can set the computer's startup order. It can be handled by restoring the default settings of the desktop system.
4. If your Dell laptop cannot enter the desktop system after booting, there may be a variety of reasons why this happens. Here are some common solutions: Restart your computer: First, try shutting down your computer completely and then restarting it. Sometimes a simple reboot can solve temporary problems.
5. Turn off the computer and then turn it back on again. While turning it on, press and hold the F8 key on your keyboard to enter the advanced startup options. After entering Advanced Startup Options, select Perform Last Known Good Configuration from your Advanced Startup Options. Then press Enter. After the execution is completed, you can enter the system.
6. If a picture is displayed after the laptop is turned on, but the desktop cannot be entered, there may be a system failure or a problem with the startup program. You can try the following methods: Start in safe mode: Try to enter safe mode. Safe mode can be entered by pressing the F8 key during startup.
What should I do if my laptop cannot enter the system?
Restart the computer. If you can enter the system normally, it means that the last abnormality was just an occasional program or system operation error, and it does not matter. 2. If you frequently cannot enter the system normally, press F8 immediately after turning on the computer to see if you can enter the safe mode or the last correct configuration mode. If you can, enter and exit, and then restart and you should be able to enter the normal mode.
Solution: If this is determined to be the case, you only need to unplug the problematic parts and replace them with new ones or clean the dust.
You can enter safe mode for antivirus. You can check in the laptop's BIOS to see if there are any errors in reading or writing or damage. Reinstalling the system is also a quick way to solve the problem of being unable to enter the system when the computer is turned on.
The laptop cannot boot to the desktop because it is caused by software conflicts. The first step is to press the ctrl key, alt key and delete key at the same time to bring up the task manager. In the second step, click File in Task Manager and select New Task.
My laptop cannot enter the system after I turn it on and it keeps stuck on starting windows. What should I do...
1. Unplug all USB peripheral hardware (including hard disk, mouse, U disk etc.), it can be solved by manually installing peripherals through driver software after entering the system. After the computer starts, press Ctrl Alt Del before entering the "Starting Windows" interface to automatically restart the computer, and the Windows system can run normally.
2. After the computer starts, press Ctrl Alt Del before entering the "Starting Windows" interface to automatically restart the computer and run the Windows system normally.
3. The reason is a system error and you need to resign the system settings. Check whether there is power at the socket, unplug the power cord, press the power button 5 to 10 times repeatedly to discharge static electricity, plug in the power cord and try to see if it can turn on.
What to do if the laptop cannot boot to the desktop
You can try to use the Windows installation disk or system recovery partition to repair it. Software conflicts: Certain software installed on your computer may cause problems with your Windows system, resulting in repeated startups. Press the F8 key to enter safe mode, restart the computer, and then keep pressing the F8 key on the keyboard to enter safe mode.
Safe mode startup: Try to enter safe mode. Safe mode can be entered by pressing the F8 key during startup. If you can enter safe mode, you can try to repair the system or uninstall recently installed software.
System file damage: If the Windows system file is damaged, the computer may have repeated startup problems. You can try to use the Windows installation disk or system recovery partition to repair it. Software conflicts: Certain software installed on your computer may cause problems with your Windows system, resulting in repeated startups.
The solutions to the problem of black screen and unable to enter the desktop after the laptop is turned on include: check whether the computer components are properly installed, confirm whether the monitor is damaged, and confirm whether there is a problem with the fan.
What to do if the laptop cannot boot into the main interface
1. System files are damaged: If the Windows system files are damaged, the computer may have repeated startup problems. You can try to use the Windows installation disk or system recovery partition to repair it. Software conflicts: Certain software installed on your computer may cause problems with your Windows system, resulting in repeated startups.
2. You can try resetting the system (1) After failing to start normally for more than two times, the system will automatically enter the Windows RE interface (system repair menu). (2) In the ‘Troubleshoot’ menu, select ‘Reset this PC’.
3. You can try to use the Windows installation disk or system recovery partition to repair it. Software conflicts: Certain software installed on your computer may cause problems with your Windows system, resulting in repeated startups.
4. First rule out that the keyboard keys are not reset. The corresponding keys on different computers are different, usually the "Delete" and "Del" keys. If so just reset these keys. If there is no floppy drive but the floppy drive is enabled, the floppy drive can be disabled.
The above is the detailed content of The notebook cannot enter the system interface. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics



When I turn on the computer, it always stops at the motherboard logo screen. Nothing happens when I press anything, and I can't enter the bios? This is usually because the BIOS battery voltage is too low, and the system time has returned to the BIOS preset time, such as 2000.1.1, 00:00. You can use it after pressing F1 to enter the bios and set the time. Do not turn off the AC power after shutting down at night. Generally, the system time will not be lost when you turn on the computer the next day, and you can still enter the system normally. If the AC power is cut off, the battery voltage cannot sustain the power consumption of the bios, and the computer will be in the same state again the next day when it is turned on. Replacing the bios battery is the ultimate solution. Win11 is stuck on the motherboard logo interface when booting? 1. It is a problem with bios settings. We only need to find the corresponding setting items.

First, download and install the [DiskGenius] tool on your computer, then open the tool, then click [File Menu] at the top, and then click [Restart the system and run the DiskGenius software], as shown in the figure. Then click [OK] in the pop-up prompt box, as shown in the figure. After that, the computer will restart and then enter the Diskgen hard disk partition interface. At this time, if we want to expand the C drive, we only need to right-click the D drive next to the logical partition and click "Adjust Partition Size" in the pop-up menu, as shown in the figure shown. Then you need to adjust the size of the D drive partition. For example, the current capacity of the D drive is 14.99GB, as shown in the figure below. At this time, we can adjust the installment of the D drive. For example, if we want to allocate 1.03GB to the C drive, we only need to allocate 1.03GB to the C drive.

Why does the laptop have a black screen when it starts up and the fan keeps beeping? 1. When the computer starts up and the screen goes black but the fan spins, it is usually caused by poor contact between the monitor cable and memory and other hardware. You can disassemble the computer to check each component, remove dust and reinstall it. 2. Power supply problem: The battery is exhausted or the power adapter fails, which may cause the computer to fail to boot. Try replacing the power adapter or rechargeable battery to see if the computer can boot normally. Hardware failure: If there is a problem with the computer hardware device, it may not start properly. 3. The fault may be caused by a problem with the hard disk, or the computer may not have good heat dissipation. 4. The fan keeps beeping after the computer is turned on, but the monitor screen is black and unresponsive. Determine what the problem is based on the sound of the buzzer when the computer is turned on. The long beep is that the graphics card is not connected properly. first check

The 24h2 version is the latest operating system released by Microsoft. I believe many users have seen some download packages on the Internet. So how can win1124h2 skip the Internet installation system? Let this site carefully introduce the latest version of win1124h2 to users. Skip the Internet installation tutorial. The latest version of win1124h2 skips the online installation tutorial. Method 1: Skip by modifying the registry. 1. Press the Shift+F10 keys to bring up the cmd command prompt window and enter the following command: regedit and press Enter to quickly open the registry editor. If users feel that the 24h2 version is not used to the operation, they can click on the 23h2 version below to reinstall it. Win1123H22263

Dell’s after-sales maintenance warranty period for all three packages of Dell laptops is one year. The warranty time for different hardware is different. Specifically, hardware with a 36-month warranty includes: CPU, memory. Hardware with a 24-month warranty includes: motherboard, graphics card, LCD screen, hard drive, power adapter, keyboard, and mouse module. The warranty period for Dell notebooks is generally one to three years. Different models have different warranty periods. Generally, the entire machine has a one-year warranty, and specific parts have their own warranty periods. The warranty period for important parts is 3 years, such as memory and graphics card. The warranty period for minor components, such as hard drives, is two years. It should be noted that the higher-positioned Precision mobile workstation only supports basic warranty by default, but the warranty period is extended to 3 years. If you want to get professional

Tutorial on assembling a computer and installing a system? Nowadays, the system installation for assembling computers is very simple and convenient, and only requires a CD. First enter the bios settings, set the computer to boot first with the CD-ROM drive, then restart the computer and load the system CD into the CD-ROM drive. The CD will automatically enter the installation state. At this time, you only need to manually repartition the partitions, and the rest will be completed automatically. How to install win11 system when assembling a computer? 1. First, we need to download a win11 image file from this site before installing it. 2. The win11 image file has undergone a large number of professional tests to ensure stable installation and smooth operation. 3. After the download is completed, load the folder in the download path and run the "windowssetup" process in it.

Dell notebook has a black screen when it is turned on 1. If the notebook has a black screen when it is turned on, the indicator light is on, the main screen is black, and there is no wind when you place your hand on the fan of the host computer. Then it is a problem with the power adapter. At this time, it needs to be removed and replaced with a new one. Start switch problem. Black screen when booting, no self-test. Use the meter pin to short-circuit the startup terminal on the motherboard, and it will start normally. 2. Insufficient battery: Connect the power supply. Wait for a while and then restart. Graphics card failure: Replace the graphics card. If the laptop supports an external monitor, find a good monitor and connect it to your laptop. 3. Reason four: Monitor problem. If the power supply is normal, but the screen is still dark, try to connect another monitor to the computer (you can borrow one if necessary) to make sure it is not the monitor.

On the social platform Xiaohongshu, the interaction between users is a reflection of the vitality of the platform. Sometimes users encounter problems being unable to send when replying to other people's comments. So, why can’t Xiaohongshu reply to other people’s comments and send them out? How to solve this situation? Next, I will answer these two questions in detail for you. 1. Why can’t Xiaohongshu reply to other people’s comments be posted? Xiaohongshu's failure to reply to other people's comments may be due to the following reasons: 1. Network problem: The network connection is unstable or the signal is poor, resulting in the failure to successfully send the comment. 2. Account problems: There may be abnormalities in the account, such as not logging in for a long time, illegal operations, etc., resulting in failure to send comments. 3. System problems: There may be system failures or maintenance on the Xiaohongshu platform, which affects the comment sending function. 4.Content
