Gigabyte ga770td3l motherboard
What kind of CPU can be installed in Gigabyte GA-770T-D3L? What kind of 4-core CPU can be installed in Gigabyte GA-770T-D3L?
1. If Gigabyte GA770T-D3L can be equipped with the best CPU, According to the support list on the official website, there are two types: The first case: PCB with rev. 1 can support AMD FX series processors, such as: FX-6100, FX-8100, etc.
2. This motherboard uses 4 1-phase CPU power supply and can support a maximum TDP 125W processor. The highest processor with AM3 interface and TDP 125W is Phenom II x6 1100T, so this motherboard supports up to Phenom II x6 1100T. Refer to the CPU support list on the official website.
3. You can install CPUs with am3 interface, such as dual-core x240 245 250 and quad-core x4 640 x4 945.
Where is the motherboard battery of Gigabyte ga770td3l
The position of the laptop motherboard battery is not fixed, but the motherboard battery is button-shaped, so you can find its location if you find the button-shaped battery. If you want to replace the motherboard battery, you need to prepare a new button battery, remove the old one, and then replace it with the new one.
The lower left corner is the battery. You can take off the black tape and see if it's usually blocked.
The battery of this motherboard adopts a method similar to that of a laptop motherboard battery (two wires connect the battery to the motherboard), and is directly attached to the side of the wireless network card, as shown in the red box in the picture below.
The lower right corner of the motherboard. The battery is between the two PCIe slots, which is very conspicuous. If you push the metal card slot in the opposite direction of the battery, the battery will pop up. GIGABYTE is one of the computer hardware manufacturers in Taiwan, China. Its business scope covers home, commercial, e-sports, cloud and other technology fields.
What kind of graphics card can Gigabyte GA-770T-D3L be equipped with?
1. Gigabyte 770T-D3L paired with pcx5528s graphics card can optimize computer functions, which can greatly improve the running speed of the system. At the same time, the pcx5528s graphics card can automatically clean up garbage regularly and keep the system in a healthy operating state, so that there will be no lag when playing games. . So Gigabyte 770T-D3L is equipped with pcx5528s graphics card.
2. Gigabyte GA-770T-D3L PCI-E slot: 1×PCI-E X16 graphics card slot 4×PCI-E X1 slot PCI slot: 2×PCI slot IDE slot: 1×IDE slot FDD slot: 1×FDD, connected to floppy drive SATA interface: 6×SATA II interface supports HD6850, as long as the CPU is good enough, it can be configured.
3. Friends! The choice of graphics card depends on the grade of the CPU. The matching rules are low-end versus low-end, mid-range versus mid-range, and high-end versus high-end.
4. If you have a small budget, you can consider spending around 200 to buy a second-hand 9600GT D3 or GT240 D5, which is enough to play 3D online games with low effects. Of course, I don’t know if your CPU is from Shenma. If the CPU is 250 or 640 from Shenma, you can consider getting a GTX650 or HD7750, which will be better for playing 3D games.
How to turn on vt on Gigabyte 770td3l
Gigabyte's motherboard turns on VT. The specific steps are as follows: Shut down the computer, press the power button again to turn it on, and quickly press the F10 button while turning it on to enter the bios.
Turn on the computer and press the DEL key on the keyboard when the LOGO appears. After entering the BIOS interface of the computer, use the left and right keys to select system information, select system language, and set the BIOS language to Simplified Chinese. Then use the left and right keys to select MIT, and select advanced frequency settings in the interface to enter.
The method to enable virtualization VT is as follows: When the motherboard LOG screen appears when the computer is turned on, quickly press the DEL key to enter the BIOS interface. Select "Advanced BIOS Features" or "Advanced", then find "CPU Configuration" and press Enter.
Press the DELETE key when booting to enter BIOS settings. There is an item inside - Intel Virtualization Technology (Intel Virtualization Technology), set it to: Enabled, and then save it. If there is a VT-D (Intel Virtualization Technology) option, it also needs to be changed to Enable.
is the Intel virtualization technology in the first picture, which is now enabled! I don’t know if you have installed 360 Security Guard. If you have installed it, it may have enabled the "Nucleus Crystal Mode". Try turning it off and then restarting it.
The above is the detailed content of Gigabyte ga770td3l motherboard. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics



When I turn on the computer, it always stops at the motherboard logo screen. Nothing happens when I press anything, and I can't enter the bios? This is usually because the BIOS battery voltage is too low, and the system time has returned to the BIOS preset time, such as 2000.1.1, 00:00. You can use it after pressing F1 to enter the bios and set the time. Do not turn off the AC power after shutting down at night. Generally, the system time will not be lost when you turn on the computer the next day, and you can still enter the system normally. If the AC power is cut off, the battery voltage cannot sustain the power consumption of the bios, and the computer will be in the same state again the next day when it is turned on. Replacing the bios battery is the ultimate solution. Win11 is stuck on the motherboard logo interface when booting? 1. It is a problem with bios settings. We only need to find the corresponding setting items.

What is the installation path of the graphics card driver? 1. Turn on the computer, click Computer, and open the Device Manager. For all devices on our computer, find the installation directory location of the graphics card driver. Click on the display adapter, find the device to which the driver belongs, and click to select properties. After entering properties, select Update Driver. 2. The graphics card driver is best installed on the C drive. By default, some drives are installed on the system disk. Cannot make selection. If you want to choose, you can install it on other disks. It is better to divide the hard disk into multiple areas than one area. The access speed through the C drive is faster than the D drive, and the access speed through the D drive is faster than the E drive. 3. It cannot be changed otherwise problems will occur. The driver is installed in C:\ProgramFiles, and C:\WINDOW

How to set up the U disk boot in the HP notebook bios (how to enter the HP computer bios) and then insert the U disk to be booted first into the USB port of the notebook. If you want to install the system, the system program must have been prepared in the U disk. First, open the laptop. Make sure the laptop is turned off. Setting the bios must be done with the computer turned off. Then insert the U disk that you want to boot first into the USB port of the notebook. If you want to install the system, the prerequisite is that the system program has been prepared in the U disk. Take the HP ProDesk400G5SFF desktop computer as an example. Set the BIOS disk startup method: First, restart the computer and wait for the startup screen to appear. There are two ways to set up USB disk startup on HP notebooks. One is to directly press the shortcut key to select

Tutorial on assembling a computer and installing a system? Nowadays, the system installation for assembling computers is very simple and convenient, and only requires a CD. First enter the bios settings, set the computer to boot first with the CD-ROM drive, then restart the computer and load the system CD into the CD-ROM drive. The CD will automatically enter the installation state. At this time, you only need to manually repartition the partitions, and the rest will be completed automatically. How to install win11 system when assembling a computer? 1. First, we need to download a win11 image file from this site before installing it. 2. The win11 image file has undergone a large number of professional tests to ensure stable installation and smooth operation. 3. After the download is completed, load the folder in the download path and run the "windowssetup" process in it.

How to enter bios after assembling a computer? Before entering the BIOS, you need to make sure that the computer is completely shut down and powered off. Here are several common ways to enter the BIOS: 1. Use shortcut keys: Most computer manufacturers will display a prompt message at startup telling you which key to press to enter the BIOS settings. Usually the F2, F10, F12 or Delete key. After pressing the appropriate keys, you should be able to see a screen with information about your computer's hardware and BIOS settings. 2. Use the button on the motherboard: Some computer motherboards have a dedicated button for entering BIOS settings. This button is usually labeled "BIOS" or "UEFI". After pressing the button you should be able to see

How to cancel the MSI motherboard icon when booting 1. Press the DEL key when booting to enter the BIOS. Generally, in the "Advanced Features" item, you can find the words MSI motherboard LOGO screen. Select DISABLED, save and exit. There will no longer be this MSI motherboard LOGO screen when you turn on the computer in the future. MSI motherboard refers to the motherboard brand developed by MSI (MSI Technology Company). 2. The logo displayed when the computer is turned on is basically that of the motherboard manufacturer. You can set QUICKPOST to DISENABLE in the BIOS, so that the logo will generally no longer be displayed. It will display computer configuration-related information and give you more details. 3. First, teach you how to flash the BIOS in Windows environment. First: Go online

1. Win11 does not have very high requirements for the motherboard. You can first download healthcheck or whynotwin11 to check whether your other hardware devices support it (you can download it from this site). 2. If other conditions are met and only tpm does not meet the requirements, you can enable tpm in the bios settings. 3. Restart the system, and then press [DEL] on the keyboard to enter the BIOS settings when the logo pops up. 4. Enter the [Settings] option and [Miscellaneous] option in sequence. 5. Find [Intel Platform Trust Technology (PTT)] below and set it to [Start]. 6. If it is an AMD platform, then

1. Gigabyte motherboard 1. First, we restart the computer and use the keyboard [DEL] to enter the BIOS settings when restarting. 2. Find and enter the [Settings] tab above. 3. Then find and enter [Miscellaneous] under settings. 4. Set [Intel Platform Trust Technology (PTT)] to [Enabled]. 5. After the settings are completed, use the keyboard [F10] to save, and then click [YES] to exit. 2. ASUS motherboard 1. First restart the computer and continuously tap [del] on the keyboard to enter the bios settings when booting. 2. Click [AdvancedMode] or press [F7] to find [A
