1. First, we open the phone, find the "Settings" on the phone, and then click "Settings" to enter the setting interface. Under the settings page, we need to find "Wireless and Networks" and then click "Wireless and Networks" to enter the corresponding settings page.
2. How to connect OPPO mobile phone to WLAN: "Set WLAN" and then turn on the WALN switch. The system will list the detected WLAN networks in a list. Click on the WLAN network you want to connect to. If you choose an encrypted network, you will need to enter the access password to connect.
3. Enter Settings--WLAN--turn on the WLAN switch, which will automatically search for nearby available WLAN networks (including hotspots); click the "Refresh Manual Search" button on the WLAN interface to manually search for WLAN networks; on the phone Select the WiFi network you want to connect to in the "Available Networks" list on the WLAN interface.
4. First, connect the router and the broadband modem using a network cable. The connection method is to connect the lan port of the broadband modem and the wan port of the router through a network cable.
5. First, connect the WAN interface of the router, and then connect the mobile phone to the wifi signal of the router, as shown in the figure below.
6. First, open the “Settings” program that comes with your phone. Then in the settings interface, find the "Wi-Fi" option and click to enter. You can see the wifi link status in this interface. You must first disconnect the current network. Click the button similar to "i" at the end of the wifi name.
1. Yes, you just need to set it up. Enter the router with your mobile phone to set the password: connect the mobile phone to wireless, check the IP on the mobile phone: settings--wlan--menu key--advanced--ip address. Check the router address based on the IP (there is a prompt on the back of the router). Enter the address: 19161 in the address bar of the mobile browser.
2. Use a computer, mobile phone and router to connect via wired or wireless connections. After correctly connecting the computer or mobile phone to WiFi, open the mobile browser and enter 19160.1 in the address bar to log in to the router interface. Enter the management name and password in the input box correctly to log in to the router's management page.
3. As long as the mobile phone supports WiFi function, it can be connected and used without installing a sim card. Usually when we go to a mobile phone experience store, we can see that many experience machines can directly experience the Internet, and there is no SIM card installed in them.
4. I have China Unicom broadband installed at home and a wireless router, but I don’t have a computer. Can I use my mobile phone to use wifi? Yes, but the router must be set up. If it is set elsewhere and involves the Internet user password, you should not be able to use it. Just find a laptop and set it up at home and you can use it. The China Unicom broadband installed at home uses a wireless router.
5. In this way, the wireless router can send out wireless signals; turn on the WIFI function of the mobile phone within the coverage of the wireless router; search for the set WIFI account and enter the password; after the connection is successful, you can use the mobile phone to access the Internet.
6. Mobile phones with WiFi function can receive the WiFi signal of the wireless router. Steps to connect your phone to WiFi: Open your phone settings. Turn on Wi-Fi. Search for wireless WiFi signals and click on the name of the network you want to connect to. If the connected network is protected, you will need to enter a password to connect to this WiFi network.
Click on the wireless network to first enter the settings interface, find Wireless and Network and click on it. Click WiFi to enter the wireless network interface and select the WiFi function. After selecting WiFi to enter, click to turn on WiFi and select WiFi network connection. Click Network or click WiFi network to expand it in the control center interface.
How to connect OPPO mobile phone to WLAN: "Set WLAN" and then turn on the WALN switch. The system will list the detected WLAN networks in a list. Click on the WLAN network you want to connect to. If you choose an encrypted network, you will need to enter the access password to connect.
Settings-General-WLAN-Select the WIFI with abnormal connection-click the WIFI signal icon on the right-click Cancel Save-then re-enter the password and reconnect, so that the mobile phone can obtain a new address and connect normally.
First, connect the router and the broadband modem using a network cable. The connection method is to connect the lan port of the broadband modem and the wan port of the router through a network cable.
First connect the WAN interface of the router, and then you need to connect your mobile phone to the wifi signal of this router, as shown in the figure below.
The above is the detailed content of wifi mobile phone. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
