If you are using a wireless mouse, check whether the wireless transceiver is in good contact with the laptop. You can try changing the USB interface for testing. . If replacing the USB interface does not work, it is recommended to replace the wireless mouse battery to avoid the problem of insufficient battery. Sometimes the low battery mouse light will come on, but the mouse will also become unresponsive.
The solution to the problem that the laptop mouse does not respond when plugged in is as follows: If the mouse is a Bluetooth wireless mouse, first check whether the Bluetooth function is turned on normally. If it is a wireless mouse in charging mode and the mouse does not respond, you must first consider whether the mouse is out of power. Charge the mouse for a while and try again to see if the mouse can be used normally.
The switch is not on. Some wireless mice have a switch button at the bottom. Only when this button is turned to the on side can the mouse light turn on and the mouse respond. The battery is dead. The key mouse uses AA batteries. Sometimes the battery in the mouse is out of power, which will cause the mouse to become unresponsive.
The wireless mouse does not respond when connected to the computer. It is caused by the following reasons: First, we need to check the switch on the wireless mouse. This is a problem that needs to be eliminated at the beginning. Otherwise, do not adjust it for a long time. Finally, it is found that the switch is not turned on. What a joke.
Mouse driver problem. A very small number of wireless mice require driver installation. At this time, you need to install the driver provided by the manufacturer when you purchase it, and then try it again. Signal interference from the same mouse. Wireless mice use different solutions and designs. If there are people around you using the same wireless mouse as you, wireless interference may occur.
This is caused by insufficient power in the mouse battery to drive the wireless mouse. Insufficient power will cause the wireless mouse to operate slowly or become unresponsive.
The switch is not on. Some wireless mice have a switch button at the bottom. Only when this button is turned to the on side can the mouse light turn on and the mouse respond. The battery is dead. The key mouse uses AA batteries. Sometimes the battery in the mouse is out of power, which will cause the mouse to become unresponsive.
The reasons why the Bluetooth mouse does not respond when used are: It is likely that the battery is dead and needs to be replaced with a new charged battery. There may be a problem with the socket. You can try changing the wireless mouse receiver to another socket. Another situation is that the mouse may be damaged, so the mouse can only be replaced.
A wireless mouse will also become unresponsive if it is out of power. Some people did not pay attention to the battery being out of power when using a wireless mouse, and suddenly found that it was unresponsive. Solution: This is an easy solution, just replace the battery with a new one.
1. The reason why the wireless mouse on the computer does not respond: The switch on the wireless mouse is not turned on and the computer cannot search for the device. Solution: Turn on the switch on the wireless mouse and pair it again. The wireless mouse has insufficient power and cannot be used. Solution: Just charge the wireless mouse.
2. There is a problem with the receiver. The wireless mouse has a receiver plugged into the computer. You can try changing the receiver to a USB interface. If it still doesn’t work, the receiver may be broken. You can try another one. Try the receiver again. Sometimes the infrared rays under the wireless mouse will be blocked by other things.
3. The wireless mouse does not respond when connected to the computer. It is caused by the following reasons: First, we need to check the switch on the wireless mouse. This is a problem that needs to be eliminated at the beginning. Otherwise, do not adjust it for a long time and finally find that the switch is not turned on. It's a joke.
4. The reasons why the mouse does not respond are: the mouse may have poor contact. If you find that it cannot move, shake the mouse cord first. If the mouse occasionally moves when shaking, it means poor contact. If the mouse is dropped to the ground or damaged by a collision, if it doesn't respond, it needs to be repaired or replaced with a new one.
1. There are many reasons for mouse failure, such as a broken mouse, poor mouse contact, system lag, driver conflict, etc. Before Two types are hardware failures, and the latter two are software failures.
2. The reason why the mouse does not respond when you turn on the computer. Restart the computer and check whether the mouse and keyboard return to normal. If the fault is resolved, it is caused by the motherboard not receiving power.
3. This may be caused by accidentally turning off the touch screen. Generally, press Fn (function key) F6 (different keys on different laptops, with touchpad images on the keys) to unlock. Some computers also have buttons that directly open and close the touchpad. Next, you can check whether it is a driver problem.
4. The solution to the problem that the laptop mouse does not respond when plugged in is as follows: If the mouse is a Bluetooth wireless mouse, first check whether the Bluetooth function is turned on normally. If it is a wireless mouse in charging mode and the mouse does not respond, you must first consider whether the mouse is out of power. Charge the mouse for a while and try again to see if the mouse can be used normally.
The above is the detailed content of Why is my laptop wireless mouse not responding?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
