It's probably the memory. The memory module is incompatible. The new one you bought can be turned on without plugging it in. It is recommended that you find out what HZ the memory module of your computer is, 1333 or 1600. Just buy it according to the frequency of your memory module.
Take off the new one. If it still barks, remove the old one and erase the gold finger. If the old memory stick is working fine, remove the old one and replace it with the new one. If the new one also works normally, it means that the two memory sticks cannot work at the same time. Clear cmos and try again. Swap the two memory sticks and try again. The only option is to replace the memory.
Reinsert the memory module or replace the memory. AMIBIOS1 short: Memory refresh failed. Replace the memory module. 2 short: Memory ECC verification error. A beeping sound indicates that the memory self-test failed. It's probably not inserted properly. You have to push it down hard and then the clips on both sides get stuck.
The reason is that the memory stick is not inserted properly. Needs to be re-plugged. The method of installing a memory module is as follows: First, determine whether the model of the memory slot in the computer host matches the model of the memory. If you don’t know the model number, just check the location of the slot and the memory gap.
AMIBIOS1 Short: Memory refresh failed. Replace the memory module. 2 short: Memory ECC verification error. A beeping sound indicates that the memory self-test failed. It's probably not inserted properly. You have to push it down hard and then the clips on both sides get stuck.
The memory module is of poor quality. You can use an eraser to gently wipe the contacts of the memory, and then install it into the computer; if there are multiple memories, insert one separately and test to see if the computer is running normally to determine whether it is a single quality problem or incompatibility; pair the two memories. Change the slot and pay attention to whether the new memory and the old memory have the same frequency.
The beeping sound is continuous and long, which is the alarm sound of the computer motherboard thinking that the memory is not found. Apparently it was caused by the memory not being plugged in properly. Check whether the memory is inserted properly. Generally, the alarm will sound if it is not plugged in properly, but sometimes it does not alarm or the buzzer is broken and the alarm cannot be heard. Carefully reinsert it.
Unplug the memory first and then turn on the computer. If the host memory alarms, it means that the CPU and host are basically normal.
1. The computer fails to start and makes a beeping sound, prompting a hardware failure. Possibly a memory failure. When there is a problem with the memory plugged into the motherboard, it will make a beep beep sound. At this time, you need to shut down the computer, remove the memory module, plug it in again, and try to restart the computer. It may be a hard drive failure.
2. If the machine crashes due to excessive dust or poor contact, check the heat dissipation of the CPU and graphics card, remove dust, oil, or replace the fan. You can clean the chassis and tighten all connections. Insert firmly.
3. Short, the system starts normally, indicating that there is no problem with the machine; 2 short, the routine is wrong, please enter CMOS Setup and reset the inaccurate options; 1 long and 1 short, there is an error in RAM or motherboard.
4. Either the motherboard is broken or the CPU is not plugged in properly. Re-plug the CPU. There is a power problem. Although the power supply is powered on, it cannot make the motherboard work normally. Try replacing the power supply. If the graphics card is loose or oxidized, the keyboard light will come on and the screen will not display. Wipe the gold finger of the graphics card with an eraser and check whether the capacitor on the graphics card is bulging.
5. Memory problem: If your computer's memory is damaged or loose, the computer may make a beeping sound when starting up and stop running with a black screen. Monitor problems: If you have a problem with your monitor, your computer may also have a black screen when you turn it on.
6. When the computer starts, the beeping beeps repeatedly but does not appear. This may be due to one of the following reasons: Power supply problem: The power supply may be faulty, causing the computer to fail to start. You can check whether the power plug and power cord are tightly connected and try to replace the power cord. Motherboard problem: The motherboard may be malfunctioning, preventing the computer from starting.
1. The reason is that the memory module is not inserted properly. Needs to be re-plugged. The method of installing a memory module is as follows: First, determine whether the model of the memory slot in the computer host matches the model of the memory. If you don’t know the model number, just check the location of the slot and the memory gap.
2. The reason is that the memory module is not inserted properly. Needs to be re-plugged. The method of installing a memory module is as follows: First, determine whether the model of the memory slot in the computer host matches the model of the memory. If you don’t know the model number, just check the location of the slot and the memory gap. It should be caused by poor memory contact.
3. First, check whether the memory is inserted properly. Generally, the alarm will sound if it is not plugged in properly, but sometimes it does not alarm or the buzzer is broken and the alarm cannot be heard. Carefully reinsert it. In addition, if there are multiple memory sticks, it may be caused by incompatibility. If there are multiple memory sticks, insert one separately and test to see if it is normal.
1. The beeping sound means that the memory self-test has failed. It's probably not inserted properly. You have to push it down hard and then the clips on both sides get stuck.
2. Check whether the memory is inserted properly. Generally, the alarm will sound if it is not plugged in properly, but sometimes it does not alarm or the buzzer is broken and the alarm cannot be heard. Carefully reinsert it. If it still doesn't work, it may be that the memory module is of poor quality. If the memory is new, just replace it directly. If the memory is old, use an eraser to wipe the golden finger of the memory.
3. The reason is the memory slot problem. When installing four 16g memory in Shadow Elf 9plus, the memory module is not inserted properly, or the slot contact is poor, which will cause a beeping sound when booting. You need to ensure that the memory module is correctly inserted into the corresponding slot and inserted tightly.
4. The beep beep beep of the host computer usually means that the computer's memory module is faulty. At this time, you can turn on the computer host, remove the memory module, wipe it and insert it. If Accumulating too much dust in the memory stick can also cause computer malfunctions. In this case, you can use an eraser to clean the golden fingers of the memory stick twice.
5.1 short: The system starts normally. This is something we hear every day and also indicates that there is nothing wrong with the machine. 2 short: General error, please enter CMOS Setup and reset the incorrect options. 1 long 1 short: RAM or motherboard error. Try changing the memory. If it still doesn't work, you have to replace the motherboard.
6. The rescuer suddenly freezes and then makes a beeping sound. This may be a warning sound due to a problem with the startup of the laptop. There are mainly the following situations. First, if it keeps beeping, the sound is very long, and the sound is continuous, it may be that the memory module is not inserted tightly or is damaged.
1. This is a graphics card alarm. Usually the graphics card is loose, the graphics card is damaged, or the graphics card power supply part of the motherboard is faulty. There will be no movement after two long beeps. After a while, you will hear the sound of "creak" reading from the floppy drive. If there is an image displayed, it will prompt that the system will start from the floppy drive and is reading the floppy disk.
2. Hello, it is recommended to completely clean the dust on the computer and replace the motherboard battery. If the laptop keeps making a beeping sound when it is turned on, the memory may be loose. Re-plugging and unplugging the memory may solve the problem. If the problem still cannot be solved, it is recommended to send it to a specialized maintenance department for repair.
3. Replace the memory. Four short beeps, the system clock is wrong. Repair or replace the motherboard. Five short beeps, CPU error. But it may not be entirely the fault of the CPU itself. There may be a problem with the CPU socket or other places. If the CPU works fine on other motherboards, the fault must lie with the motherboard. Six short beeps, keyboard controller error.
The above is the detailed content of The computer beeps after adding a memory stick. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
