The computer has a blue screen and does not respond when I turn it on.

Why does the monitor have no signal after the computer blue screen restarts?

1. Graphics card hardware failure: Since the graphics card is an important component responsible for imaging, if the graphics card itself fails , it will cause the computer to have a blue screen and no signal to the monitor after restarting. At this time, the faulty graphics card needs to be replaced. Memory module failure: Memory module failure may also cause the computer to have a blue screen and no signal on the monitor after restarting.

2. There may be an error in a certain program or driver, which can be resolved after restarting. The computer may be infected. Check the system for Trojans or viruses. If so, you can use Computer Manager to completely kill the computer. The hardware may be loose, check whether the hardware is firmly inserted.

3. Memory module failure: Memory module failure may also cause the computer to have a blue screen and no signal to the monitor after restarting. The problem can be solved by replacing the memory module or replacing the memory slot. Hard disk problem: The hard disk is damaged or other problems may also cause the computer to have a blue screen and no signal to the monitor after restarting.

How to solve the problem when there is no signal on the computer blue screen and cannot be turned on

You can solve the problem by replacing the memory module or replacing the memory slot. Hard disk problem: The hard disk is damaged or other problems may also cause the computer to have a blue screen and no signal to the monitor after restarting. You can remove the memory stick and plug it in again, or try replacing a memory stick.

Memory module failure: Memory module failure may also cause the computer to have a blue screen and no signal on the monitor after restarting. The problem can be solved by replacing the memory module or replacing the memory slot. Hard disk problem: The hard disk is damaged or other problems may also cause the computer to have a blue screen and no signal to the monitor after restarting.

\x0d\x0aSolution: \x0d\x0aThe keyboard light does not light up. First, wipe the memory stick with an eraser, and check whether there are any burn marks on the gold finger of the memory stick. Replace the memory slot.

After the computer has a blue screen, it cannot be turned on and the display shows nothing. Solution to the computer blue screen: First find the cause of the computer blue screen. There are many reasons for the computer blue screen.

Possible reasons and solutions for why the computer appears with a blue screen when starting up and cannot be turned on are as follows: First, enter the computer's BIOS interface, find the "Intogratedperipherals" option, and then just change the "SATAConfiguration" item Change the value to IDE to complete the solution.

What should I do if my computer has a blue screen and cannot be turned on?

1. Check the hardware: First, you need to check whether the computer hardware is damaged. For example, open the computer host and check whether the interfaces of the memory module, graphics card, and hard disk are in good condition. If the hardware is found to be damaged, it needs to be replaced in time.

2. The computer has a blue screen and cannot be turned on. Solution: The computer is accidentally installed with malware, or malicious programs are generated while surfing the Internet. It is recommended to use software such as 360 Guardian and Kingsoft Guardian to clean up garbage and detect and kill malware. It may be solved. If it doesn't work, reinstalling and restoring the system can solve the problems caused by the software.

3. The fourth possibility is to replace the hard drive, because the blue screen may be caused by a problem with the hard drive.

4. If the laptop has a blue screen and cannot be turned on, you can try the following methods: Check the computer hardware: First eliminate the hardware reasons, such as whether the memory is loose, whether the hard disk is damaged, etc. Enter safe mode: If you can enter safe mode, you can try to repair the system through safe mode.

What to do if the computer fails to start after a blue screen

The computer cannot start normally after a blue screen may be caused by many reasons. The following are some possible solutions: Check the hardware: First, you need to check whether the computer hardware There is damage. For example, open the computer host and check whether the interfaces of the memory module, graphics card, and hard disk are in good condition. If the hardware is found to be damaged, it needs to be replaced in time.

Overclocking the computer causes a blue screen. The only way to take good heat dissipation measures is to replace it with a powerful fan and add some heat dissipation materials such as silicone, which will be much better.

The method to recover if the computer blue screen fails to start normally is as follows: Restart the computer, press the F8 key immediately after booting to enter the advanced options page, select the most recent correct configuration, and see if the computer can be recovered. If it doesn't work, repeat the above operation and press F8 again on the advanced options page. This time we enter safe mode.

Restart the computer. If the blue screen only appears occasionally, just restart the computer. During the shutdown process, blue screens appear intermittently, which can be solved by downloading patches. Open 360 Security Guard, select vulnerability repair, and check "Automatically fix blue screens". virus infection.

The above is the detailed content of The computer has a blue screen and does not respond when I turn it on.. For more information, please follow other related articles on the PHP Chinese website!