solidworks laptop configuration recommendations

solidworks2020 official recommended configuration

1. Processor: i5 or above or the same level. Memory: 16G-32G.

2. CPU: CPU with main frequency 0 or above, dual core and four threads. It is recommended to use a high-frequency 4-core I5I7 CPU or the same level of Xeon processor.

3. Secondly, according to the official system requirements of SolidWorks 2020, the recommended configuration is Intel Core i7 processor, 16GB memory and 4GB independent graphics card. If the configuration of the MX550 meets the above conditions, it can theoretically run SolidWorks 2020.

4. Solidworks2020 processor: i5 or above or the same level. Memory: 16G-32G. Graphics card: 4G independent graphics or 8G independent graphics SSD: 125G or above System: win10-64.

5. It is recommended that the system use win7 64-bit and memory DDR3 1600 8G or above.

6. Zanqi ultra-high-definition designer cloud workstation can meet multi-functional services such as cloud office, massive models, massive software, remote collaboration, etc., and can be applied to many industries such as industrial design, architectural design, and game design. It is suitable for many scenes such as film and television animation.

SOLIDWORKS installation must-see! 2022, 2021 computer hardware configuration and operating system requirements

SOLIDWORKS system requirements: SOLIDWORKS is the world’s first three-dimensional CAD software developed based on Windows. So far, it is not available Support Mac (Apple) system.

The hard disk must have high rotation speed and high cache. 7200 rpm and 64M cache are also the current mainstream configurations. If you have the budget, it is recommended to use a solid-state hard drive (above 60G, you can consider putting the system, solidworks, and your documents. On SSD, the efficiency will be greatly improved).

Memory: It is recommended not less than 16G, 16G3600 *2 (32G or above) is recommended (the higher, the better, it depends on your budget). CPU: CPU with a main frequency of 0 or above and dual-core and four threads (my i7-10750). It is recommended to use a high-frequency 4-core I5I7 CPU or the same level of Xeon processor.

Basic configuration of a notebook that can run solidworks and proE

It is recommended that the system use win7\8 64-bit and memory DDR3 1600 8G or above.

The basic configuration is as follows: high main frequency, which requires 0GHz or above; large memory, the memory is recommended to be 8G; high-speed disk storage, it is recommended to configure a solid-state drive and a hard disk of 1T or above; a quad-core processor, PROE Computing and running rendering with SolidWorks have higher requirements on CPU and memory. There are no specific requirements for other configurations.

i5 4590 configuration with monitor: AMD R9 270X graphics card, taking into account 3D graphics and gaming performance.

The requirements are very low, that is, it can run. My i3 3220 plus core display CAD and Creo can basically be used, but Creo runs relatively slowly.

Let me recommend these models. This is one of the most cost-effective models from several major brands. Choose according to your favorite appearance and personal needs. The price is for reference only. If you need any other help, you can ask or HI me directly. Statement: I will organize it myself and update it regularly.

It should be no problem to use it. My original machine was an Acer netbook with 1G memory. It can also run 2007 and 2008. I have also used Proe. Don’t be too strict. A higher version will do. Complex parts such as assembly If there is too much body, it will get stuck. If you analyze it later, it depends on the processor speed.

What kind of notebook configuration is good for SolidWorks

It is recommended that the system use win7\8 64-bit, and the memory is DDR3 1600 8G or above.

CPU: CPU with a main frequency of 0 or above, dual core and four threads. It is recommended to use a high-frequency 4-core I5I7 CPU or the same level of Xeon processor.

The priority order of hardware configuration for SOLIDWORKS computers is: memory, CPU, graphics card, hard disk, and monitor.

Solidworks2020 processor: i5 or above or the same level. Memory: 16G-32G. Graphics card: 4G independent graphics or 8G independent graphics SSD: 125G or above System: win10-64.

What laptop is better for solidworks

High clock speed, large memory, high-speed disk storage, solidworks calculation, running and rendering all consume CPU and memory, and the graphics card only provides visual improvement (only for professional graphics cards Effective), so under normal circumstances, the graphics card does not matter (especially when you have no budget, 128M junk cards can be used equally).

The priority order of hardware configuration for SOLIDWORKS computers is: memory CPU graphics card hard disk monitor.

Graphics card: It is best to choose a professional graphics card, such as NVIDIA Quadro series graphics card (P2000 or above, you can check this on the SolidWorks official website) Recommended: NVIDIA Quadro P4000 5G.

What computer configuration is required for SolidWorks2012

1. Memory: It is recommended not less than 16G, and 16G3600 *2 (32G or more) is recommended (the higher, the better, it depends on your budget). CPU: CPU with main frequency 0 or above, dual core and four threads. It is recommended to use a high-frequency 4-core I5I7 CPU or the same level of Xeon processor.

2. Solidworks configuration requirements are as follows: Memory: no less than 16G, 32GB or above is recommended, the higher the better. CPU: CPU with main frequency above 0GHz, dual core and four threads. It is recommended to use a high-frequency 4-core I5I7 CPU or the same level of Xeon processor.

3. It is recommended that the system use win7\8 64-bit and memory DDR3 1600 8G or above.

4. Solidworks 2012 requires the following basic computer configurations: high frequency, above 0GHz; large memory, 8G is recommended; high-speed disk storage, solid-state hard drive is recommended, and hard drive above 1T; quad-core core For processors, PROE and solidworks calculations and rendering have higher requirements on CPU and memory.

5. This depends on your specific usage, rendering level and part model size, etc. Most of the time, if a notebook wants to run Solidworks2012 smoothly, it requires a 2G main frequency, 2G memory and a configuration of 1G independent graphics or above.

The above is the detailed content of solidworks laptop configuration recommendations. For more information, please follow other related articles on the PHP Chinese website!